32bit 3d Printer Board | Top Gutscheine & Rabatte

DISCOUNTLatest 32bit 3d Printer Board
BIGTREETECH SKR Mini E3 V1.2 Control Board 32Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3
  • Note:We recommend that you check the instructions before purchasing:Https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3?spm=a2g0o.detail.1000023.20.22b67ce5URWusv. If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;
  • Supporting display :2.8 inch, 3.5 inch color touch screen and Ender3 printer LCD12864 screen;
  • Support BLtouch, RGB color lamp, block detection, shutdown and other functions;
  • Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
Latest 32bit 3d Printer Board
KINGPRINT SKR V1.3 Smoothieware 32bit Controller Board for 3D Printer Compatible with 12864LCD / Support A4988 / 8825 / TMC2208 / TMC2100 Driver (SKR V1.3)
  • Note: If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • 2.Equipped with highly modular open source firmware Marlin2.0 and Smoothieware, it is convenient for users to DIY and secondary development, eliminating the worries of not being able to master the core code;
  • 3.Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
  • 4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
  • 5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;CE Certification to adopt 4-Layer PCB with "Gold deposition technology" which capability is more stable and better heat dissipation
Latest 32bit 3d Printer Board
BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2209 (with TFT24)
  • BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
  • TFT24 Upgrade the firmware by SD card. It is easy and convenient to operate.Serial port screen mode supports two printing modes: SD card and U disk
  • Use tutorial:https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1/blob/master/TFT24-V1.1Manual.pdf; Need more firmware, please contact us.
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4.If there are any problems,please contact us via message,we will strive as much as possible to assist you.
Latest 32bit 3d Printer Board
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3
  • 1)Note: If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • 2)Support BLtouch, filament detection, power-off resume, automatic shutdown, etc
  • 3)Onboard Sensorless homing function, which can be used by plugging in the jump cap
  • 4)Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink
  • 5)The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation
Latest 32bit 3d Printer Board
BIQU DIRECT SKR V1.3 32bit 3D Printer Control Board with CE Smoothieboard&Marlin Open Source Compatible with Ramps1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers
  • Using 32-bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved
  • Reserved extended port SERVOS of PWM signal to support BL Touch
  • Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions
  • The SPI working mode of the TMC2130 driver and the UART working mode driven by the TMC2208, which eliminates complex wiring process and can be used by simple unplugging jumper cap
  • SKR V1.3 board has CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
Latest 32bit 3d Printer Board
BIGTREETECH Newest SKR Mini E3 V2.0 32Bit Control Board Integrated with TMC2209 UART Driver Upgrade SKR MINI E3 V1.2 for 3D Printer Parts for Ender 3 Pro/5 3D Printer(Firmware installed for Ender 3)
  • 32bit main frequency 72MHz ARM level Cortex-M3 series STM32F103RCT6 Microprocessor
  • 4 Layers PCB for better heat dissipation
  • Sensorless homing function by plugging in the jump cap
  • Supports BL touch, locked-rotation detection, power-off resume, shutdown after Finish Printing
  • Parallel type double Z axis interface
Latest 32bit 3d Printer Board
BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130 (with 4TMC2208)
  • TMC2208-The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
  • TMC2208-The actual and interpolated microsteps can be combined to achieve maximum torque.
  • TMC2208-The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4.If there are any problems,please contact us via message,we will strive as much as possible to assist you
Latest 32bit 3d Printer Board
BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130
  • 1) Note: If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • 2) Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development;
  • 3) Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation;
  • 4) On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off
  • 5.BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4.Please contact us by message if there are any issue and we will strive as much as possible to assist you.

32bit 3d Printer Board | Bewertung

Auf dieser Seite finden Sie die Liste der besten 32bit 3d Printer Board mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

32bit 3d Printer Board | Details und aktive Angebote

Hier ist die Tabelle der besten 32bit 3d Printer Board. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

32bit 3d Printer Board Cheap
Programmable Controller Industrial Control Board 32-bit CPU for Printing Packaging
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • Easy to install, adopt fixed hole installation
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
32bit 3d Printer Board Cheap
High Precision Industrial Control Board Programmable Controller Carpentry for Printing Building Materials Packaging
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
  • Easy to install, adopt fixed hole installation
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
32bit 3d Printer Board Cheap
Industrial Control Board Programmable Controller Anti-Interference for Printing Packaging
  • Easy to install, adopt fixed hole installation
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
32bit 3d Printer Board Cheap
Ajcoflt TFT35 V3.0 Touchscreen Display with Cable 2 Working Modes Compatible 12864LCD Mode WiFi Port 3D Printer Parts for Ender-3 SKR PRO SKR V1.3 Motherboard
  • 3.5inch screen, bigger and more comfortable handfeel. ARM Cortex-M3 Series STM32F207VCT6 master controller with 32-bit main frequency of 120MHZ.
  • There are 2 working mode can be selected for higher compatibility via SD card update the firmware.
  • When using class 12864 LCD mode, it connects with EXP1 and EXP2 of the motherboard, which has no touch-function.
  • When using serial touchscreen mode, it connects with TFT or AUX-1 on the motherboard through RS232, which has touch-function.
  • Serial screen mode supports SD card and USB flash drive printing. There are 2 groups of UART serial port expansion ports for users to use on their own. It can implement WIFI function and can be operated by other devices.
32bit 3d Printer Board Cheap
Motor Driver 2‑Phase FYDM504T Industrial Control Supplies DC24~50V/AC20~40V Stepper Motor Driver Semiconductor Packaging for Electronic Processing
  • Using imported industrial‑grade components, the technology is mature and stable; provide undervoltage, overvoltage, overcurrent, short circuit, open circuit, phase dislocation, etc. fault status indication and automatic protection function
  • Stepper motor driver possess large speed range: select a suitable stepper motor, up to 1500rpm
  • Interference frequency filtering: optically isolated differential signal input, impulse response frequency up to 250Kpps, strong function with low repair rate
  • High performance and high efficiency: the latest 32‑bit for control technology enables the motor to achieve the best output performance
  • Low vibration, low noise: automatically calculate the resonance point, effectively suppress the noise and vibration ring of the motor running at low speed
32bit 3d Printer Board Cheap
Boobro-Official Accessories Durable Hardware Integrate PCB Controller Board 3D Printer Mainboard Motherboard 4Layers
  • Widely used in 3D printers.
  • Great reduce the wiring problem, more convenient connection, and more stable.
  • You can choose DC power supply connection or directly from the terminal, it is convenient to use.
  • For TriGorilla use CP2102 chip as a serial port communication, communication not only stable
  • Motor drive circuit doesn't integration on the circuit board. You can change any stepper motor driver you need, easier to operate.(Support A4988/ DRV8825 /TMC2100 driver)
32bit 3d Printer Board Cheap
CHUNSHENN 3D Printer Mainboard, TriGorilla Mainboard Motherboard With USB Cable For 3D Printer Kossel Prusa i3 Corexy
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • Simple to install:Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable.
  • Convenient to use:TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply, you can choose DC power supply connection or directly from the terminal, it is convenient to use.
  • TriGorilla use CP2102 chip as a serial port communication, communication not only stable, but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board, so while those people who need to batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.)
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product.
32bit 3d Printer Board Cheap
JIAHONG Accessories 3D Printer Accessories RUMBA32-Bit Motherboard + TMC2208x6 Silent Driver Kit Marlin 2.0 3D Printer
  • They're great plenty of stepper drivers, heater/fan channels to spare,Like most other printer control boards, they're 8-bit. Built around the same ATmega2560 that powers RAMPS, there are limits to what they can do and how quickly they can do it. These limits are a function of the CPU speed (16MHz) and the available memory (256K flash, 8K SRAM) of the ATmega2560. These specifications limit how many features you can enable, and how quickly you can run your printer
  • RUMBA32 is a control board from Aus3D! RUMBA32 relies on Marlin 2.0's 32-bit support, which is rapidly evolving, so documentation and configuration settings may be subject to change. Please make sure you are comfortable following the instructions in our getting Started guide before purchasing RUMBA32.
  • We've taken the tried and tested hardware design that is RUMBA+ and upgraded it with a processor: an STM32F446. Boasting a 180MHz clock rate, 512Kb of flash memory, and 128Kb of SRAM, all built on a high-performance ARM architecture. If you're after a control board that will be set to handle cutting- firmware features now and into the future, RUMBA32 has you covered.
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!
32bit 3d Printer Board Cheap
CHUNSHENN 3D Printer Mainboard, 12V Rumba Plus Upgraded Integrated Mainboard Control Board Support 3 Print Heads With 6pcs DRV8825 Stepper Driver For 3D Printer
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • Using the same CPU for Arduino Mega, for Atmega2560 as the master chip, with high-performance USB chip Atmega16U2, can be compatible for Ramps related firmware.
  • 5pcs temperature sensor interface inputs.
  • All pins are derived, easy to do more features to expand.
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product.
32bit 3d Printer Board Cheap
6040 3 Axis 1.5KW CNC Milling Cutter Engraving Machine Engraving Machine VFD Engraving Machine Portal Cutter DHL Delivery
  • ღ The new water-cooled VFD with 1.5 kW is available for long operating times. This can improve the processing ability of the machine and be used for processing aluminium alloys and hardwood.
  • ღ The water cooling spindle is more stable and durable.
  • ღ High quality, precise ball recirculation screw drive increases the precision of engraving. Anti-blackflash, high precision, long life cycle.
  • ღThe mini CNC router frame is movable. The device can be connected to the computer as other external device such as printers, scanner.....
  • ღ It can work with different materials (metallic and non-metallic), such as wood, PMMA or other plastics, MDF boards, natural wood, PVC, acrylic, wood, composite board plywood. and soft metal. such as aluminium, copper and silver to engrave them in 3D/2D work etc.

32bit 3d Printer Board | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits 32bit 3d Printer Board gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von 32bit 3d Printer Board veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten 32bit 3d Printer Board-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

32bit 3d Printer Board | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel 32bit 3d Printer Board kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt 32bit 3d Printer Board

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und 32bit 3d Printer Board könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

32bit 3d Printer Board | Günstige Produkte

Nachfolgend haben wir eine Reihe von 32bit 3d Printer Board ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige 32bit 3d Printer Board zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

DISCOUNTBest
BIGTREETECH SKR Mini E3 V1.2 Control Board 32Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3
  • Note:We recommend that you check the instructions before purchasing:Https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3?spm=a2g0o.detail.1000023.20.22b67ce5URWusv. If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;
  • Supporting display :2.8 inch, 3.5 inch color touch screen and Ender3 printer LCD12864 screen;
  • Support BLtouch, RGB color lamp, block detection, shutdown and other functions;
  • Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
Best
KINGPRINT SKR V1.3 Smoothieware 32bit Controller Board for 3D Printer Compatible with 12864LCD / Support A4988 / 8825 / TMC2208 / TMC2100 Driver (SKR V1.3)
  • Note: If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • 2.Equipped with highly modular open source firmware Marlin2.0 and Smoothieware, it is convenient for users to DIY and secondary development, eliminating the worries of not being able to master the core code;
  • 3.Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
  • 4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
  • 5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;CE Certification to adopt 4-Layer PCB with "Gold deposition technology" which capability is more stable and better heat dissipation
Best
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3
  • 1)Note: If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • 2)Support BLtouch, filament detection, power-off resume, automatic shutdown, etc
  • 3)Onboard Sensorless homing function, which can be used by plugging in the jump cap
  • 4)Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink
  • 5)The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation
Best
Eryone 3D Printer ER 20, Auto-leveling Bed Sensor, Super Quiet 3D Printer with TMC2209, Powerful 32Bit Motherboard, 250 * 220 * 200mm
  • Easy to Use: Auto-bed leveling gives you the perfect first layer and the ink coating glass makes you stick and remove printed objects easily.

  • Silent: TMC2209 offers whisper quiet and more accurate printing without the need of mechanical limit switch (sensorless).

  • Simplicity: Modular design, built-in power supply, auto bed leveling sensor, no bed adjust knob, plug and play. ER20‘s sleek & streamlined round corners comply with the ergonomic design.

  • Reliable: ER20 supplies resume printing, sparing you the unexpected head-scratching outage. Fully upgraded aluminum profile frame provides durability. The reliable extruder is mounted with an Eryone sensor for hassle-free printing.

  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print

Best
BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2209 (with TFT24)
  • BIGTREETECH TFT24-V1.1 is a small volume ultra-clear 3D printer display board. It can work in two modes.
  • TFT24 Upgrade the firmware by SD card. It is easy and convenient to operate.Serial port screen mode supports two printing modes: SD card and U disk
  • Use tutorial:https://github.com/bigtreetech/BIGTREETECH-TFT24-V1.1/blob/master/TFT24-V1.1Manual.pdf; Need more firmware, please contact us.
  • SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.
  • BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4.If there are any problems,please contact us via message,we will strive as much as possible to assist you.
Best
BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130
  • 1) Note: If you have any questions or suggestions, you can contact us as soon as possible, we are very grateful for your valuable comments.
  • 2) Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development;
  • 3) Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation;
  • 4) On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off
  • 5.BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4.Please contact us by message if there are any issue and we will strive as much as possible to assist you.

32bit 3d Printer Board | Katalog

Sie können 32bit 3d Printer Board im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. 32bit 3d Printer Board ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

32bit 3d Printer Board | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man 32bit 3d Printer Board kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von 32bit 3d Printer Board. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können 32bit 3d Printer Board direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

Motor Driver 2‑Phase FYDM504T Industrial Control Supplies DC24~50V/AC20~40V Stepper Motor Driver Semiconductor Packaging for Electronic Processing
  • Using imported industrial‑grade components, the technology is mature and stable; provide undervoltage, overvoltage, overcurrent, short circuit, open circuit, phase dislocation, etc. fault status indication and automatic protection function
  • Stepper motor driver possess large speed range: select a suitable stepper motor, up to 1500rpm
  • Interference frequency filtering: optically isolated differential signal input, impulse response frequency up to 250Kpps, strong function with low repair rate
  • High performance and high efficiency: the latest 32‑bit for control technology enables the motor to achieve the best output performance
  • Low vibration, low noise: automatically calculate the resonance point, effectively suppress the noise and vibration ring of the motor running at low speed
Programmable Controller Industrial Control Board 32-bit CPU for Printing Packaging
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • Easy to install, adopt fixed hole installation
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
JIAHONG Accessories 3D Printer Accessories RUMBA32-Bit Motherboard + TMC2208x6 Silent Driver Kit Marlin 2.0 3D Printer
  • They're great plenty of stepper drivers, heater/fan channels to spare,Like most other printer control boards, they're 8-bit. Built around the same ATmega2560 that powers RAMPS, there are limits to what they can do and how quickly they can do it. These limits are a function of the CPU speed (16MHz) and the available memory (256K flash, 8K SRAM) of the ATmega2560. These specifications limit how many features you can enable, and how quickly you can run your printer
  • RUMBA32 is a control board from Aus3D! RUMBA32 relies on Marlin 2.0's 32-bit support, which is rapidly evolving, so documentation and configuration settings may be subject to change. Please make sure you are comfortable following the instructions in our getting Started guide before purchasing RUMBA32.
  • We've taken the tried and tested hardware design that is RUMBA+ and upgraded it with a processor: an STM32F446. Boasting a 180MHz clock rate, 512Kb of flash memory, and 128Kb of SRAM, all built on a high-performance ARM architecture. If you're after a control board that will be set to handle cutting- firmware features now and into the future, RUMBA32 has you covered.
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!
Industrial Control Board Programmable Controller Anti-Interference for Printing Packaging
  • Easy to install, adopt fixed hole installation
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
Ajcoflt TFT35 V3.0 Touchscreen Display with Cable 2 Working Modes Compatible 12864LCD Mode WiFi Port 3D Printer Parts for Ender-3 SKR PRO SKR V1.3 Motherboard
  • 3.5inch screen, bigger and more comfortable handfeel. ARM Cortex-M3 Series STM32F207VCT6 master controller with 32-bit main frequency of 120MHZ.
  • There are 2 working mode can be selected for higher compatibility via SD card update the firmware.
  • When using class 12864 LCD mode, it connects with EXP1 and EXP2 of the motherboard, which has no touch-function.
  • When using serial touchscreen mode, it connects with TFT or AUX-1 on the motherboard through RS232, which has touch-function.
  • Serial screen mode supports SD card and USB flash drive printing. There are 2 groups of UART serial port expansion ports for users to use on their own. It can implement WIFI function and can be operated by other devices.
High Precision Industrial Control Board Programmable Controller Carpentry for Printing Building Materials Packaging
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
  • Easy to install, adopt fixed hole installation
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
CHUNSHENN 3D Printer Mainboard, 12V Rumba Plus Upgraded Integrated Mainboard Control Board Support 3 Print Heads With 6pcs DRV8825 Stepper Driver For 3D Printer
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • Using the same CPU for Arduino Mega, for Atmega2560 as the master chip, with high-performance USB chip Atmega16U2, can be compatible for Ramps related firmware.
  • 5pcs temperature sensor interface inputs.
  • All pins are derived, easy to do more features to expand.
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product.

32bit 3d Printer Board | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das 32bit 3d Printer Board-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • 32bit 3d Printer Board bei Amazon
  • 32bit 3d Printer Board bei Ebay
32bit 3d Printer Board ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete 32bit 3d Printer Board wählen.

32bit 3d Printer Board | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so 32bit 3d Printer Board noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

Motor Driver 2‑Phase FYDM504T Industrial Control Supplies DC24~50V/AC20~40V Stepper Motor Driver Semiconductor Packaging for Electronic Processing
  • Using imported industrial‑grade components, the technology is mature and stable; provide undervoltage, overvoltage, overcurrent, short circuit, open circuit, phase dislocation, etc. fault status indication and automatic protection function
  • Stepper motor driver possess large speed range: select a suitable stepper motor, up to 1500rpm
  • Interference frequency filtering: optically isolated differential signal input, impulse response frequency up to 250Kpps, strong function with low repair rate
  • High performance and high efficiency: the latest 32‑bit for control technology enables the motor to achieve the best output performance
  • Low vibration, low noise: automatically calculate the resonance point, effectively suppress the noise and vibration ring of the motor running at low speed
Programmable Controller Industrial Control Board 32-bit CPU for Printing Packaging
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • Easy to install, adopt fixed hole installation
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
JIAHONG Accessories 3D Printer Accessories RUMBA32-Bit Motherboard + TMC2208x6 Silent Driver Kit Marlin 2.0 3D Printer
  • They're great plenty of stepper drivers, heater/fan channels to spare,Like most other printer control boards, they're 8-bit. Built around the same ATmega2560 that powers RAMPS, there are limits to what they can do and how quickly they can do it. These limits are a function of the CPU speed (16MHz) and the available memory (256K flash, 8K SRAM) of the ATmega2560. These specifications limit how many features you can enable, and how quickly you can run your printer
  • RUMBA32 is a control board from Aus3D! RUMBA32 relies on Marlin 2.0's 32-bit support, which is rapidly evolving, so documentation and configuration settings may be subject to change. Please make sure you are comfortable following the instructions in our getting Started guide before purchasing RUMBA32.
  • We've taken the tried and tested hardware design that is RUMBA+ and upgraded it with a processor: an STM32F446. Boasting a 180MHz clock rate, 512Kb of flash memory, and 128Kb of SRAM, all built on a high-performance ARM architecture. If you're after a control board that will be set to handle cutting- firmware features now and into the future, RUMBA32 has you covered.
  • We strive to answer all questions and resolve any problems as quickly as possible. Your satisfication is Our Goal! Thank you!
Industrial Control Board Programmable Controller Anti-Interference for Printing Packaging
  • Easy to install, adopt fixed hole installation
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
Ajcoflt TFT35 V3.0 Touchscreen Display with Cable 2 Working Modes Compatible 12864LCD Mode WiFi Port 3D Printer Parts for Ender-3 SKR PRO SKR V1.3 Motherboard
  • 3.5inch screen, bigger and more comfortable handfeel. ARM Cortex-M3 Series STM32F207VCT6 master controller with 32-bit main frequency of 120MHZ.
  • There are 2 working mode can be selected for higher compatibility via SD card update the firmware.
  • When using class 12864 LCD mode, it connects with EXP1 and EXP2 of the motherboard, which has no touch-function.
  • When using serial touchscreen mode, it connects with TFT or AUX-1 on the motherboard through RS232, which has touch-function.
  • Serial screen mode supports SD card and USB flash drive printing. There are 2 groups of UART serial port expansion ports for users to use on their own. It can implement WIFI function and can be operated by other devices.
High Precision Industrial Control Board Programmable Controller Carpentry for Printing Building Materials Packaging
  • Integrated and systematic anti-interference treatment, the power supply circuit is designed with multiple anti-interference, without fear of a variety of harsh electromagnetic interference working environment
  • The control board is FX1N-14MT,24VDCPower supply. Input:X0-X7A total of 8 points,Darlington transistor Output:Y0-Y5A total of 6 points,each circuit1A working current,Maximum memory capacity: 8000Step program
  • Easy to install, adopt fixed hole installation
  • Features a powerful high-speed ARM core 32 CPU can use programming software FXGPWIN and GX Developer and GT-Works can be programmed . Can be downloaded \ upload \ debug \ monitor \ encryption \ link text or touch screen \PLC storage space clear \ data un
  • PLC application: can be used in all kinds of industrial automatic control occasions, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, wood, central air conditioning, environmental protection equipment.and si
CHUNSHENN 3D Printer Mainboard, 12V Rumba Plus Upgraded Integrated Mainboard Control Board Support 3 Print Heads With 6pcs DRV8825 Stepper Driver For 3D Printer
  • Smooth transmission, bumpers, damping capacity, low noise level.
  • Using the same CPU for Arduino Mega, for Atmega2560 as the master chip, with high-performance USB chip Atmega16U2, can be compatible for Ramps related firmware.
  • 5pcs temperature sensor interface inputs.
  • All pins are derived, easy to do more features to expand.
  • We always attach great importance to our customers. Please feel free to contact us If you find any defects on the product.

32bit 3d Printer Board | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu 32bit 3d Printer Board finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: of 5 - votes
1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)
Loading...

Best Deals

3d Popsockets For Phones | Top Gutscheine & Rabatte


3d Probe | Top Gutscheine & Rabatte


Ravensberger 3d Jigsaw | Top Gutscheine & Rabatte