3d Heatsink | Top Gutscheine & Rabatte

Latest 3d Heatsink
WINSINN 3D Printer Heatsink, Compatible with V6 Prusa i3 MK3 J-Head Extruder Hotend Bowden - Long Heat Sink Aluminum M7 (Pack of 3Pcs)
  • Compatible with V6 Prusa i3 MK3 J-Head Extruder Hotend Bowden
  • Universal For Remote Long or Short Distance,Heatsink Inner Bore: 4.2mm
  • Compatible with M7 thread V6 Heatbreak
  • Not need Pneumatic Fittings
  • Made by WINSINN
Latest 3d Heatsink
GeeekPi 5PCS TMC2208 V2 3D Printer Stepper Motor Driver Modules with Heatsinks, 3D Printer Motherboard Accessories, Replace TMC2100 for 3D Printer Parts
  • Ultra-quiet technology: StealthChop2 (Ultra-quiet technology) can drive the motor to work in extremely quiet conditions, can control the motor sound below 10dB decibel, the noise is much lower than the traditional current control.
  • High dynamic chopper: The SpreadCycle PWM chop mode automatically configures a hysteresis attenuation function before the slow and fast attenuators. The average current reflects the configured normal current. There is no transition period when the sine wave crosses zero. This reduces the current and torque fluctuations and makes the current waveform closer to the sine wave. Compared to the traditional constant chopping type, SpreadCycle PWM chop mode, the motor under wave mode control runs smoot
  • Compared with the TMC2100 stepper motor drive module, the TMC2208 drive module generates less heat. The TMC2208 has a heating effect of about 0.8A and the 2100 has a heating effect of 0.5A. It can be used interchangeably with the TMC2100.
  • The TMC2208 drive step value is calculated according to 16 subdivisions. The chip internally uses a differential algorithm to extend the 16 subdivisions to 256 subdivisions.
  • Package Includes: 5x TMC2208 Stepper Motor Driver Modules, 5x Blue Heatsinks, 5x Black Heatsinks, 1x Slotted Screwdriver
Latest 3d Heatsink
4pcs TL-Smoother Plus Addon Module with 4pcs Heatsink 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Terminator Reprap MK8 I3
  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • Product Description: On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.
  • Heatsink size: 26 * 20 * 6mm, material: Aluminum. TL smoother size: 48mm * 25.3mm * 7.6mm.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.
Latest 3d Heatsink
sourcing map Cross Shape Notch Heatsink for Stepper Motor,3D Printer 9x9x12mm Silver 5pcs
  • [PARAMETER] Overall Size: 9 x 9 x 12 mm / 0.35 x 0.35 x 0.47 inch (L*W*H); Color:Silver Tone.
  • [APPLICATION] Great for cooling chips, stepper motor driver module and other small electronics that didn't come with any cooling.
  • [DESCRIPTION] This heatsink come without any thermal tape or adhesive tape, we recommend using some glue (here is not included) to stick.
  • [FEATURE] With cross shaped notch.It only take seconds to install, easy to install.
  • [NOTE] Some scratches may be caused in the production process, but this does not affect the cooling effect.
Latest 3d Heatsink
H HILABEE 3D Printer Blower Cooling Fan 4x4x1cm Fan Extruder Heat Sinks 12V
  • Brand new, never used.
  • Nozzle diameter: 0.4mm
  • Heating tube: 12V
  • Extend the service life of the printer.
  • Made of high quality material,durable to use.
Latest 3d Heatsink
3Dman Nema17 Stepper Motor Steel and Rubber Vibration Dampers with M3 Screw for Creality CR 10, 10S, Ender 3 and other 3D Printers, CNC (Pack of 3+Heat Sinks)
  • Nema 17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3D Printer, effectively eliminate vibration and improve 3D printing quality.
  • One Damper is used for per stepper or electric motor. 3D Printer see a 5-10dB reduction in noise when used on X and Y Axis steppers with the vibration damper for Nema 17.
  • Works on both Cartesian and Delta style Additive Manufacturing Machines such as CR-10, with good filament for the best results in your 3D printer and remove vibration and noise.
  • Each package contains 12 pieces screws for you to use, enough for you to use and can provide much convenience in the process.
  • NOTE: Our products maybe there are a little INDENTATION or DUST because the stepper dampers were removed from the other machines, but they are never used before.
Latest 3d Heatsink
KINGPRINT TMC2208 V3.0 UART Mode Stepper Motor Driver with Heatsink for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board(Pack of 2pcs)
  • Excellent Heat dissipation
  • stealthChop can driver the motor to work under extreme silence
  • spreadCycle:The motor controlled by the PWM chopper mode operated more smoothly and Avoid losing steps and Jittering
  • Adopt “Gold Finish” process for better antioxidant
Latest 3d Heatsink
sourcing map 11x40x40mm Black Aluminum Heatsink Thermal Adhesive Pad Cooler for Cooling 3D Printers 4Pcs
  • Overall Size: 11 x 40 x 40 mm / 0.43 x 1.57 x 1.57 inch; Color:Black.
  • This heatsink come with thermal conductivity adhesive ,which can provide good cooling results.
  • Effectively for cooling 3D printer, the motors couldn't sink heat into the frame, and heatsink will reduce the temperature of stepper motors.
  • Easy to install, it only take seconds to install.
  • Package Content: 4 x Heatsink.
Latest 3d Heatsink
GeeekPi 4-Pack TL-Smoother Module Kit with Heatsink & Du-pont Wire for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Controller Terminator
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so that they are also protected against induction voltages in the unpowered state of the driver. On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.
  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.
  • TL-Smoother assembly instructions: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs
  • Package Includes:4x 3D Printer TL-Smoother, 4x Du-Pont Lines,4x Heatsinks
Latest 3d Heatsink
SIMAX3D DRV8825 Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer (Pack of 5pcs)
  • Simple step and direction control interface
  • SIMAX3D DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step)
  • DRV8825 stepper motor uses 8.2 - 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling)
  • Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
  • Built-in voltage regulator (the need for any external logic supply voltage)

3d Heatsink | Bewertung

Auf dieser Seite finden Sie die Liste der besten 3d Heatsink mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

3d Heatsink | Details und aktive Angebote

Hier ist die Tabelle der besten 3d Heatsink. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

3d Heatsink Cheap
Sagladiolus 1pcs Mini Cooling Fan 3D Printer Parts 5015 Radial Turbo Blower Fan DC 12V Cooling Fan For 3D Printer Cooling Heatsinks
  • 1.Made of top quality plastic, it is durable.
  • 2.Designed for 3D printers.
  • 3.The bearing is high precision, long life and low noise.
  • 4.Operating voltage is DC12V, prohibit overload use.
  • 5.2-terminals power connector, easy to install.
3d Heatsink Cheap
Seacanl 3D Printer Fan, Printer Accessories, Low-noise Plastic Cooling Fan Replacement Consumer Electronics for Computers 3D Printers Blowers
  • Made of high quality plastic, light weight
  • Bearing is of high precision, long life and low noise
  • Excellent for cooling heatsinks on hot ends, or other cooling needs
  • Move a decent amount of air, better work with tuyere
  • DC 12V fan for computers, consumer electronics and 3D printers
3d Heatsink Cheap
VEOPYER 1pc Ssd Enclosure With Heat Sink, Drive To Usb-c External Storage Enclosure For m.2 Nvme Ssd m-Key 2242/2260/2280 (Gray)
  • SANDBLASTED SURFACE/APPLICATION-Sandblasted surface, anti-rust, not easy to stain, smooth and bright, long service life, beautiful appearance. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drives
  • SILICONE PAD-Silicone heat dissipation pads, one on the top and one on the bottom, can increase cooling performance and quickly dissipate heat. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drive
  • 45 DEGREE 3D MODE-The top of the aluminum shell is designed with a 45-degree 3D pattern, and the bottom is a striped 3D pattern, which brings excellent physical ventilation service and good heat dissipation performance
  • INSTALLATION-Remove the film of the cooling pad and fix it on the groove. Place the SSD PCB in the groove. Close the aluminum box. Fix the entire aluminum housing in a suitable slot on the motherboard
  • COMPACT-The size is only 7.3 * 2.44 * 0.96cm / 2.87 * 0.96 * 0.38inch (L * W * H), compact and light, and does not take up much installation space
3d Heatsink Cheap
VEOPYER 1pc Ssd Enclosure With Heat Sink, Drive To Usb-c External Storage Enclosure For m.2 Nvme Ssd m-Key 2242/2260/2280 (Red)
  • SANDBLASTED SURFACE/APPLICATION-Sandblasted surface, anti-rust, not easy to stain, smooth and bright, long service life, beautiful appearance. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drives
  • SILICONE PAD-Silicone heat dissipation pads, one on the top and one on the bottom, can increase cooling performance and quickly dissipate heat. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drive
  • 45 DEGREE 3D MODE-The top of the aluminum shell is designed with a 45-degree 3D pattern, and the bottom is a striped 3D pattern, which brings excellent physical ventilation service and good heat dissipation performance
  • INSTALLATION-Remove the film of the cooling pad and fix it on the groove. Place the SSD PCB in the groove. Close the aluminum box. Fix the entire aluminum housing in a suitable slot on the motherboard
  • COMPACT-The size is only 7.3 * 2.44 * 0.96cm / 2.87 * 0.96 * 0.38inch (L * W * H), compact and light, and does not take up much installation space
3d Heatsink Cheap
Drv8825 Stepper Motor, with Heat Sink 3D Printer Accessories, Stepper Driver, Electronic Product for 3D Printer Laser Printers V3 Engrave Machine
  • 2 * The end baffles of each axis, a total of 6.
  • Six different step resolutions: full, half, 1 / 4, 1 / 8, 1 / 16, 1 / 32.
  • Use a detachable A4988 or DRV8825 compatible stepper drive.
  • PWM spindle and direction pin.
  • Applicable to 2.5A stepper motor drive below 8.2V~45V.
3d Heatsink Cheap
Victool Motor Drive Controller Board Module, Stepper Motor Driver Module AT2100 with Heat Sink For 3D Printer Robots Parts
  • Intelligent stepper motor driver with integrated decoder
  • The AT2100 supports voltage attenuation for full quiet operation while supporting mixed current attenuation for high torsion output
  • Support automatic semi-current locking function, automatically reduce the output current by half when there is no STEP change, reduce the system locking power consumption.
  • Synchronous rectification control circuit improves power consumption during PWM operation
  • Internal protection circuit with hysteresis protection, undervoltage lockout and overcurrent protection
3d Heatsink Cheap
3D Printer Extruder Upgrade Kit, Heatsink All Metal Hotend Kit Heater Block, for Ender‑3 CR‑10 Hot End Accessories Heating Block
  • 【Material】The 3D printer extruder upgrade kit is made of high-quality alumina material, which is a high-hardness compound with stable performance and corrosion resistance
  • 【Accuracy】This 3D printer extruder upgrade kit has accurate size holes, simple operation, easy to install, and very practical 3D printer extruder accessories
  • 【Great performance】The extruder upgrade has high temperature performance, stable shrinkage, and durable
  • 【Application】This product suitable for CR‑10/CR‑10S /Ender‑3/Ender‑3 Pro/CR‑10 S5/CR‑10 /MINI/CR‑20/CR‑20 PRO/TronXY X5S/Tevo Tornado/Alfawise U20
  • 【Complete tools】The tools of the 3D printer extruder kit are very complete, and the scope of application is very wide. simple structure, easy to assemble, and neat appearance, you can operate it yourself, suitable for DIY assembly
3d Heatsink Cheap
Victool 3D Printer Motor Driver, TMC2208 V1.2 Stepper Motor Driver Kit with Heat Sink and Stepstick Protector for 3D Printer
  • The stepper motor driver kit is integrated with heat sink and stepstick protector.
  • Two-phase stepper driver, maximum current 2A, voltage range 4.75-36V, 256 subdivision.
  • Low heat generation, can replace TMC2100, A4988, DRV8825, LV8729 stepper drive.
  • Well crafted with high quality material for high working performance.
  • Having long service life,suitable for multiple kinds of work.
3d Heatsink Cheap
teyiwei 35pcs 3D Printer CNC Controller Kit for ArduinoIDE CNC Shield Board Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema 17 Stepper Motor
  • 1. The latest CNC shield expansion board V3.0,Include:1 x CNC Shield Board 1 x Longruner Board 1 x 1.5m USB cable for Board 3 x Nema 17 stepper motor 1.7 A (with bracket and screw) 3 x Nema 17 Stepper Motor Mounting Bracket 3 x Mechanical Switch Endstop 3 x 3Pin 70cm Cable 4 x DRV8825 Stepper Motor Driver 4 x Aluminum heatsink with tape backing 12 x M3 Screws for bracket of stepper motor
  • 2. CNC shield board is an updated version of version 3.0, suitable for CH340G Shield 3.0 version compatible with ArduinoIDE, GRBL 0.9.
  • 3. This is a professional 3D printer DIY kit with multiple types of modules or components you need. For beginners and professionals, this is a good combination.
  • 4. Each part of this Logrunner 3D printer kit is made of high quality materials. These components can be used in a wide range of applications.
  • 5. DRV8825 stepper motor driver with radiator. High quality stepper motor driver with 4 aluminum coolers, running within 2.5A current (max), compatible with ArduinoIDE software and hardware.

3d Heatsink | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits 3d Heatsink gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von 3d Heatsink veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten 3d Heatsink-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

3d Heatsink | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel 3d Heatsink kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt 3d Heatsink

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und 3d Heatsink könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

3d Heatsink | Günstige Produkte

Nachfolgend haben wir eine Reihe von 3d Heatsink ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige 3d Heatsink zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

DISCOUNTBest
YOTINO 3 Pcs DC 12V 3D Printer Cooling Fan Blower Fan for Cooling Heatsinks 3D Printer(50 x 50 x 15mm, black)
  • 3 Pieces fan size: 50 x 50 x 15mm, with approx 20cm cable, 2 pin connection
  • These small fans have good cool-to-cool properties, because they produce high airflow. Due to the compact design, they can easily be accommodated in the 3D printer.
  • Bearing: plain bearing, Speed: 7000 rpm, Air flow: 18CFM (30,6m³ / hour)
  • Supply voltage: 12 volts, Current: 0.23A, Power: 1.8W
  • Lifespan: 30000 hours Noise level: 26 db (A) Weight: 23.6 g per piece
Best
Easycargo 4pcs 40mm Heatsink Kit 40mm x 40mm x 20mm + 3M8810 Thermal Conductive Adhesive Tape, Cooler Aluminium Heat Sink for Cooling 3D Printers TEC1-12706 Thermoelectric Peltier Cooler 40x40x20mm
  • Includes 4 pieces black anodized aluminum heatsink.
  • Pre-applied thermal conductive adhesive tape backing.
  • Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706, TEC1-12710 Thermoelectric Peltier Cooler etc.
  • Dimension: 1.57 x 1.57 x 0.78 inch / 40 x 40 x 20 mm (L*W*H).
  • Unit Weight: 1.2 oz / 35 gram per piece.
Best
WINSINN 3D Printer Heatsink, Compatible with V6 Prusa i3 MK3 J-Head Extruder Hotend Bowden - Long Heat Sink Aluminum M7 (Pack of 3Pcs)
  • Compatible with V6 Prusa i3 MK3 J-Head Extruder Hotend Bowden
  • Universal For Remote Long or Short Distance,Heatsink Inner Bore: 4.2mm
  • Compatible with M7 thread V6 Heatbreak
  • Not need Pneumatic Fittings
  • Made by WINSINN
Best
Bewinner 10pcs Blue Aluminum Stepper Motor Driver Heatsink Cooling Fins Cooler 3D Printer Parts Driver Heat Sink for 3D Printer TMC2100 Stepper Driver
  • Professionally designed and suitable for 3D printer stepper motor driver
  • Adopting special mesh design and aluminium material to achieve faster heat dissipation
  • The fins increase the area of board and improve the cooling effect
  • High quality and durable with long service life
  • Easy to install, use glue to install this heatsink
Best
Easycargo 4pcs 40mm Heatsink Kit + thermal conductive adhesive tape, cooler Heat Sink for stepper motors of 3D printers NEMA 17 TEC1-12706 Thermoelectric Peltier Cooler (40mmx40mmx11mm)
  • Includes 4 pcs 40mm black anodized aluminum heatsink
  • Pre-applied thermal conductive adhesive tape backing
  • Can be applied with stepper motors of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc
  • Dimension: 1.57 x 1.57 x 0.44 inch / 40 x 40 x 11mm (L*W*H)
  • Weight: 0.6 oz / 17 gr per pc
Best
4pcs TL-Smoother Plus Addon Module with 4pcs Heatsink 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Printer Motor Drivers Terminator Reprap MK8 I3
  • TL-Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • Product Description: On the basis of the module, add a heat sink, which can effectively solve the heat dissipation during the use of the module, reduce the hot conditions, and increase the life of the module.
  • Heatsink size: 26 * 20 * 6mm, material: Aluminum. TL smoother size: 48mm * 25.3mm * 7.6mm.
  • The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
  • You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.
Best
GeeekPi 5PCS TMC2208 V2 3D Printer Stepper Motor Driver Modules with Heatsinks, 3D Printer Motherboard Accessories, Replace TMC2100 for 3D Printer Parts
  • Ultra-quiet technology: StealthChop2 (Ultra-quiet technology) can drive the motor to work in extremely quiet conditions, can control the motor sound below 10dB decibel, the noise is much lower than the traditional current control.
  • High dynamic chopper: The SpreadCycle PWM chop mode automatically configures a hysteresis attenuation function before the slow and fast attenuators. The average current reflects the configured normal current. There is no transition period when the sine wave crosses zero. This reduces the current and torque fluctuations and makes the current waveform closer to the sine wave. Compared to the traditional constant chopping type, SpreadCycle PWM chop mode, the motor under wave mode control runs smoot
  • Compared with the TMC2100 stepper motor drive module, the TMC2208 drive module generates less heat. The TMC2208 has a heating effect of about 0.8A and the 2100 has a heating effect of 0.5A. It can be used interchangeably with the TMC2100.
  • The TMC2208 drive step value is calculated according to 16 subdivisions. The chip internally uses a differential algorithm to extend the 16 subdivisions to 256 subdivisions.
  • Package Includes: 5x TMC2208 Stepper Motor Driver Modules, 5x Blue Heatsinks, 5x Black Heatsinks, 1x Slotted Screwdriver

3d Heatsink | Katalog

Sie können 3d Heatsink im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. 3d Heatsink ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

3d Heatsink | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man 3d Heatsink kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von 3d Heatsink. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können 3d Heatsink direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

teyiwei 35pcs 3D Printer CNC Controller Kit for ArduinoIDE CNC Shield Board Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema 17 Stepper Motor
  • 1. The latest CNC shield expansion board V3.0,Include:1 x CNC Shield Board 1 x Longruner Board 1 x 1.5m USB cable for Board 3 x Nema 17 stepper motor 1.7 A (with bracket and screw) 3 x Nema 17 Stepper Motor Mounting Bracket 3 x Mechanical Switch Endstop 3 x 3Pin 70cm Cable 4 x DRV8825 Stepper Motor Driver 4 x Aluminum heatsink with tape backing 12 x M3 Screws for bracket of stepper motor
  • 2. CNC shield board is an updated version of version 3.0, suitable for CH340G Shield 3.0 version compatible with ArduinoIDE, GRBL 0.9.
  • 3. This is a professional 3D printer DIY kit with multiple types of modules or components you need. For beginners and professionals, this is a good combination.
  • 4. Each part of this Logrunner 3D printer kit is made of high quality materials. These components can be used in a wide range of applications.
  • 5. DRV8825 stepper motor driver with radiator. High quality stepper motor driver with 4 aluminum coolers, running within 2.5A current (max), compatible with ArduinoIDE software and hardware.
VEOPYER 1pc Ssd Enclosure With Heat Sink, Drive To Usb-c External Storage Enclosure For m.2 Nvme Ssd m-Key 2242/2260/2280 (Gray)
  • SANDBLASTED SURFACE/APPLICATION-Sandblasted surface, anti-rust, not easy to stain, smooth and bright, long service life, beautiful appearance. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drives
  • SILICONE PAD-Silicone heat dissipation pads, one on the top and one on the bottom, can increase cooling performance and quickly dissipate heat. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drive
  • 45 DEGREE 3D MODE-The top of the aluminum shell is designed with a 45-degree 3D pattern, and the bottom is a striped 3D pattern, which brings excellent physical ventilation service and good heat dissipation performance
  • INSTALLATION-Remove the film of the cooling pad and fix it on the groove. Place the SSD PCB in the groove. Close the aluminum box. Fix the entire aluminum housing in a suitable slot on the motherboard
  • COMPACT-The size is only 7.3 * 2.44 * 0.96cm / 2.87 * 0.96 * 0.38inch (L * W * H), compact and light, and does not take up much installation space
VEOPYER 1pc Ssd Enclosure With Heat Sink, Drive To Usb-c External Storage Enclosure For m.2 Nvme Ssd m-Key 2242/2260/2280 (Red)
  • SANDBLASTED SURFACE/APPLICATION-Sandblasted surface, anti-rust, not easy to stain, smooth and bright, long service life, beautiful appearance. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drives
  • SILICONE PAD-Silicone heat dissipation pads, one on the top and one on the bottom, can increase cooling performance and quickly dissipate heat. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drive
  • 45 DEGREE 3D MODE-The top of the aluminum shell is designed with a 45-degree 3D pattern, and the bottom is a striped 3D pattern, which brings excellent physical ventilation service and good heat dissipation performance
  • INSTALLATION-Remove the film of the cooling pad and fix it on the groove. Place the SSD PCB in the groove. Close the aluminum box. Fix the entire aluminum housing in a suitable slot on the motherboard
  • COMPACT-The size is only 7.3 * 2.44 * 0.96cm / 2.87 * 0.96 * 0.38inch (L * W * H), compact and light, and does not take up much installation space
Drv8825 Stepper Motor, with Heat Sink 3D Printer Accessories, Stepper Driver, Electronic Product for 3D Printer Laser Printers V3 Engrave Machine
  • 2 * The end baffles of each axis, a total of 6.
  • Six different step resolutions: full, half, 1 / 4, 1 / 8, 1 / 16, 1 / 32.
  • Use a detachable A4988 or DRV8825 compatible stepper drive.
  • PWM spindle and direction pin.
  • Applicable to 2.5A stepper motor drive below 8.2V~45V.
Seacanl 3D Printer Fan, Printer Accessories, Low-noise Plastic Cooling Fan Replacement Consumer Electronics for Computers 3D Printers Blowers
  • Made of high quality plastic, light weight
  • Bearing is of high precision, long life and low noise
  • Excellent for cooling heatsinks on hot ends, or other cooling needs
  • Move a decent amount of air, better work with tuyere
  • DC 12V fan for computers, consumer electronics and 3D printers
Victool Motor Drive Controller Board Module, Stepper Motor Driver Module AT2100 with Heat Sink For 3D Printer Robots Parts
  • Intelligent stepper motor driver with integrated decoder
  • The AT2100 supports voltage attenuation for full quiet operation while supporting mixed current attenuation for high torsion output
  • Support automatic semi-current locking function, automatically reduce the output current by half when there is no STEP change, reduce the system locking power consumption.
  • Synchronous rectification control circuit improves power consumption during PWM operation
  • Internal protection circuit with hysteresis protection, undervoltage lockout and overcurrent protection
Victool 3D Printer Motor Driver, TMC2208 V1.2 Stepper Motor Driver Kit with Heat Sink and Stepstick Protector for 3D Printer
  • The stepper motor driver kit is integrated with heat sink and stepstick protector.
  • Two-phase stepper driver, maximum current 2A, voltage range 4.75-36V, 256 subdivision.
  • Low heat generation, can replace TMC2100, A4988, DRV8825, LV8729 stepper drive.
  • Well crafted with high quality material for high working performance.
  • Having long service life,suitable for multiple kinds of work.

3d Heatsink | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das 3d Heatsink-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • 3d Heatsink bei Amazon
  • 3d Heatsink bei Ebay
3d Heatsink ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete 3d Heatsink wählen.

3d Heatsink | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so 3d Heatsink noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

teyiwei 35pcs 3D Printer CNC Controller Kit for ArduinoIDE CNC Shield Board Mechanical Switch Endstop DRV8825 A4988 Stepper Motor Driver Nema 17 Stepper Motor
  • 1. The latest CNC shield expansion board V3.0,Include:1 x CNC Shield Board 1 x Longruner Board 1 x 1.5m USB cable for Board 3 x Nema 17 stepper motor 1.7 A (with bracket and screw) 3 x Nema 17 Stepper Motor Mounting Bracket 3 x Mechanical Switch Endstop 3 x 3Pin 70cm Cable 4 x DRV8825 Stepper Motor Driver 4 x Aluminum heatsink with tape backing 12 x M3 Screws for bracket of stepper motor
  • 2. CNC shield board is an updated version of version 3.0, suitable for CH340G Shield 3.0 version compatible with ArduinoIDE, GRBL 0.9.
  • 3. This is a professional 3D printer DIY kit with multiple types of modules or components you need. For beginners and professionals, this is a good combination.
  • 4. Each part of this Logrunner 3D printer kit is made of high quality materials. These components can be used in a wide range of applications.
  • 5. DRV8825 stepper motor driver with radiator. High quality stepper motor driver with 4 aluminum coolers, running within 2.5A current (max), compatible with ArduinoIDE software and hardware.
VEOPYER 1pc Ssd Enclosure With Heat Sink, Drive To Usb-c External Storage Enclosure For m.2 Nvme Ssd m-Key 2242/2260/2280 (Gray)
  • SANDBLASTED SURFACE/APPLICATION-Sandblasted surface, anti-rust, not easy to stain, smooth and bright, long service life, beautiful appearance. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drives
  • SILICONE PAD-Silicone heat dissipation pads, one on the top and one on the bottom, can increase cooling performance and quickly dissipate heat. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drive
  • 45 DEGREE 3D MODE-The top of the aluminum shell is designed with a 45-degree 3D pattern, and the bottom is a striped 3D pattern, which brings excellent physical ventilation service and good heat dissipation performance
  • INSTALLATION-Remove the film of the cooling pad and fix it on the groove. Place the SSD PCB in the groove. Close the aluminum box. Fix the entire aluminum housing in a suitable slot on the motherboard
  • COMPACT-The size is only 7.3 * 2.44 * 0.96cm / 2.87 * 0.96 * 0.38inch (L * W * H), compact and light, and does not take up much installation space
VEOPYER 1pc Ssd Enclosure With Heat Sink, Drive To Usb-c External Storage Enclosure For m.2 Nvme Ssd m-Key 2242/2260/2280 (Red)
  • SANDBLASTED SURFACE/APPLICATION-Sandblasted surface, anti-rust, not easy to stain, smooth and bright, long service life, beautiful appearance. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drives
  • SILICONE PAD-Silicone heat dissipation pads, one on the top and one on the bottom, can increase cooling performance and quickly dissipate heat. Applicable to M.22280 solid state drives, only compatible with single-sided wafer pellet hard drive
  • 45 DEGREE 3D MODE-The top of the aluminum shell is designed with a 45-degree 3D pattern, and the bottom is a striped 3D pattern, which brings excellent physical ventilation service and good heat dissipation performance
  • INSTALLATION-Remove the film of the cooling pad and fix it on the groove. Place the SSD PCB in the groove. Close the aluminum box. Fix the entire aluminum housing in a suitable slot on the motherboard
  • COMPACT-The size is only 7.3 * 2.44 * 0.96cm / 2.87 * 0.96 * 0.38inch (L * W * H), compact and light, and does not take up much installation space
Drv8825 Stepper Motor, with Heat Sink 3D Printer Accessories, Stepper Driver, Electronic Product for 3D Printer Laser Printers V3 Engrave Machine
  • 2 * The end baffles of each axis, a total of 6.
  • Six different step resolutions: full, half, 1 / 4, 1 / 8, 1 / 16, 1 / 32.
  • Use a detachable A4988 or DRV8825 compatible stepper drive.
  • PWM spindle and direction pin.
  • Applicable to 2.5A stepper motor drive below 8.2V~45V.
Seacanl 3D Printer Fan, Printer Accessories, Low-noise Plastic Cooling Fan Replacement Consumer Electronics for Computers 3D Printers Blowers
  • Made of high quality plastic, light weight
  • Bearing is of high precision, long life and low noise
  • Excellent for cooling heatsinks on hot ends, or other cooling needs
  • Move a decent amount of air, better work with tuyere
  • DC 12V fan for computers, consumer electronics and 3D printers
Victool Motor Drive Controller Board Module, Stepper Motor Driver Module AT2100 with Heat Sink For 3D Printer Robots Parts
  • Intelligent stepper motor driver with integrated decoder
  • The AT2100 supports voltage attenuation for full quiet operation while supporting mixed current attenuation for high torsion output
  • Support automatic semi-current locking function, automatically reduce the output current by half when there is no STEP change, reduce the system locking power consumption.
  • Synchronous rectification control circuit improves power consumption during PWM operation
  • Internal protection circuit with hysteresis protection, undervoltage lockout and overcurrent protection
Victool 3D Printer Motor Driver, TMC2208 V1.2 Stepper Motor Driver Kit with Heat Sink and Stepstick Protector for 3D Printer
  • The stepper motor driver kit is integrated with heat sink and stepstick protector.
  • Two-phase stepper driver, maximum current 2A, voltage range 4.75-36V, 256 subdivision.
  • Low heat generation, can replace TMC2100, A4988, DRV8825, LV8729 stepper drive.
  • Well crafted with high quality material for high working performance.
  • Having long service life,suitable for multiple kinds of work.

3d Heatsink | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu 3d Heatsink finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 3 of 5 - 5 votes
1 Star2 Stars3 Stars4 Stars5 Stars (5 votes, average: 3,00 out of 5)
Loading...

Best Deals

3d Clock Hands Silver | Top Gutscheine & Rabatte


Gold 3d Nail Art | Top Gutscheine & Rabatte


Mars 3d Printer | Top Gutscheine & Rabatte