3d Solutech Printer Filament | Top Gutscheine & Rabatte

Latest 3d Solutech Printer Filament
3D Solutech Camo Green 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG)
  • 1.75Mm camo green pla filament
  • For common 3D printers such as makerbot, reprap, finial, up, mendel, flashforge, solidoodle 2, printrbot lc, makergear M2 and etc
  • Temperature range is 190c - 220c
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Latest 3d Solutech Printer Filament
3D Solutech Lavender Purple 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG) - 3DSPLA175LPR
  • 1.75Mm lavender Purple pla filament
  • For common 3D printers such as makerbot, reprap, finial, up, Mendel, flash forge, sol doodle 2, printout lc, maker gear M2 and etc
  • Backed by our 100 percent satisfaction guarantee
  • Temperature range is 190°c - 220°c
DISCOUNTLatest 3d Solutech Printer Filament
SUNLU PLA Filament 1.75mm 3D Printer Filament PLA 1kg Spool (2.2lbs), Dimensional Accuracy of +/- 0.02mm PLA White
  • 【Toughness Enhanced PLA Filaments】SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
  • 【Clog-Free, Bubble-Free & Easy-to-use】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ .
  • 【Wide Compatibility】 Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
  • 【Risk-Free】 One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20"
Latest 3d Solutech Printer Filament
PLA Filament 1.75mm, ERYONE Filament PLA 1.75mm, 3D Printing Filament PLA for 3D printer, 1kg 1 Spool, White
  • 1.【Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable Prints】- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
  • 2.【Purest-grade Material | Made in USA | Non Toxic and Limited Smell】- ERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
  • 3.【Professional Packaging | Vacuumed Sealed】- The filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
  • 4.【High Compatibility】- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
  • 5.【Sweet Tips】: The following shops are authorized by ERYONE brand, "Eryone-EU, Maker-Ecosystem-EU,Maker-Ecosystem-US, UbiTronics-UK, Eryone-Direct-EU". We only provide after-sales service for products of brand authorized stores. Please make sure you buy from the correct store.
Latest 3d Solutech Printer Filament
YOYI 3D Printer Filament, PLA Filament 1.75mm 2.2 lbs Spool (1kg), Dimensional Accuracy +/- 0.03 mm, 100% Europe Raw Material (red)
  • About YOYI:As a mature 3d filament enterprise,have strict requirements on 3d filament and always continuous improvement.
  • Raw Materials:YOYI raw materials are imported from Europe, without any impurities, giving buyers a better experience.
  • Strict Quality:After strict procedures, no bubbles, ultra smooth technology,little to no odor,precise precision, reaching the REACH standard.
  • Print Suggestion:Tested for all filaments,please print according to the print temperature we provide(230℃ - 260℃).
  • After Sale:We are confident in YOYI products. If you are not satisfied or do not meet your expectations, support free return within 30 days.
Latest 3d Solutech Printer Filament
Eryone Ultra Silk Copper PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool
  • [Silk Like - Filament Gives Eye-Popping Glossy Prints]- Outstanding silk surface finish prints with Eryone Ultra Silk filament PLA definitely gave an eye-popping result! Perfect for arts & crafts projects, vases and any other 6D printed items that could benefit from a unique silky smooth appearance.
  • [Easy to Print, No clogging | Natural Material, Non Toxic]- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate. 103% with virgin natural materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
  • [Professional Packaging | Vacuumed Sealed]- The silk like filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 6D models.
  • [High Compatibility]- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 6D printer in the market and with positive customers' feedback.
  • [Warm Tips]- If you have any problem with the item, please message us via Amazon message.
Latest 3d Solutech Printer Filament
SUNLU PLA+ Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ 3D Printer Filament Tolerance Accuracy +/- 0.02 mm, White
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.
Latest 3d Solutech Printer Filament
SainSmart PRO-3 Tangle-Free Premium 1.75mm PETG 3D Printer Filament, Blue PETG, 2.2 LBS (1KG) Spool, Dimensional Accuracy +/- 0.02mm, Model:101-90-740BLU
  • 【No Jamming at All Supported by an all-new technology called layer by layer, PRO-3 is featured with 100% tangle-free. This ensures the filament printed extremely smooth and no more extruder become clogged again.
  • 【Laser Precision Inspected by laser, PRO-3 ensures each inch of filament is precisely engineered to +/-0. 02mm error rate. Consistent round shape avoids unexpected interruption in printing.
  • 【Smart INDICATOR】An smart length indicator is present on the surface of the clear PC spool for your convenience to know the length of your remaining filament.
  • 【Durable and Strong Featuring with high impact-resistant and less warpage, PRO-3 PETG filament has minimal shrinkage and warping.
  • 【Reputation】PRO-3 PETG filament has the reputation of combining the functionality of ABS (stronger, temperature resistant, more durable) and reliability of PLA (easy to print) in one material.
DISCOUNTLatest 3d Solutech Printer Filament
TECHNOLOGYOUTLET PREMIUM 3D PRINTER FILAMENT 1.75MM PLA (White)
  • Material PLA filament
  • Diameter 1.75mm
  • Filament weight 1 Kg
  • IDEAL Print Temperature 210- 220°C
  • IDEAL Bed temperature 40-50°C and use 3Dlac Adhesive
Latest 3d Solutech Printer Filament
eSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1KG (2.2 LBS) Spool 3D Printing Filament for 3D Printers, Cold White
  • 【Dimensional Tolerance +/- 0.03mm】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
  • 【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
  • 【Environmental Friendly Material】PLA+ is improved and upgraded based on PLA, high strength and better toughness. eSUN filaments are made with virgin materials, biodegradable and eco-friendly, non-toxic and low odor, NO harm to user and environment.
  • 【High Compatibility】Compatible with most of FDM 3D Printers that use 1.75MM filament, Such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
  • 【Vacuumed Sealed Packaging】Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.

3d Solutech Printer Filament | Bewertung

Auf dieser Seite finden Sie die Liste der besten 3d Solutech Printer Filament mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

3d Solutech Printer Filament | Details und aktive Angebote

Hier ist die Tabelle der besten 3d Solutech Printer Filament. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

DISCOUNT3d Solutech Printer Filament Cheap
SPLA 3D Printer Filament 1.75mm, PLA Filament and PETG 3D Filament Mix Together, Shiny SPLA 1.75 Grey, 1kg
  • 【Shiny + Smooth + Strength SPLA Filament】: SPLA is made of 30% PLA, 50% PETG and 20% TPU as raw materials. Leading 3D prints to be distinct glossy, smooth and strength.
  • 【Best Suggested Setting】:Recommended nozzle temperature: 220-240℃, hot bed temperature: 80℃, pullback speed: 60-80mm/s, pullback distance: 6-8mm, filling speed: 10mm/s, filling: 20-30%.
  • 【Premium Quality SPLA Filament】: High precision diameter tolerance, 1.75mm +/-0.02mm. Not brittle and good toughness, strong inter-layer adhesion, low shrinkage and chemical resistance.
  • 【Great Value for 1.75mm Filament】: The newest convergence technologies of PLA and PETG. Having the strength and smooth finish of PETG while maintaining the easier set up and biodegradable factor of PLA Filament 1.75mm. And TPU contributes much elasticity and malleability. Get great filament at ideal price.
  • 【Vacuum Package with Desiccant】 : Enotepad 1.75mm PETG 3D Printer Filament is carefully vacuum packed with desiccant to maintain a low moisture content. And keep it dry and keep dust and foreign objects away, prevent nozzle jams.
3d Solutech Printer Filament Cheap
Minreon PETG 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.02 mm,1kg … (White)
  • Stable dimensional accuracy ensures a smooth printing experience, no extruder nozzle blocked.
  • 100% pure raw materials, non-toxic, environmentally friendly
  • Many colors for optimal 3D printing.
3d Solutech Printer Filament Cheap
PrintOxe 3D Black PLA Printing Filament 1.75-1Kg Spool (2.2 LBs) Dimensional Accuracy +/- 0.03 mm
  • PrintOxe 1st Grade 1.75mm PLA 3D Printer Filament in Retail Package Shown in Image.
  • Net of 1 Kilogram (2.2 LBs) of PLA (Polylactic Acid) Black Colour 3D Printer Filament. The Product is Vacuumed Sealed With Desiccant, Inside The Box, For Best Protection From Humidity & Moisture.
  • Spool Diameter: 7.80" (19.50 Cm), Width: 2.56" (6.50 Cm), Hub Hole Diameter: 2.20" (5.59 Cm).
  • Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F). Compatible for Popular 3D Printers Including MakerBot, Reprap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC, MakerGear M2 and Others
  • Disclaimer: Color displayed in the image may vary slightly from the actual Color. This is due to the fact that every computer monitor has a different capability to display Colors.
3d Solutech Printer Filament Cheap
Reprapper Easy-to-Print Gray PETG Filament for 3D Printer 1.75mm (± 0.03mm) 2.2lb (1kg)
  • PETG filament - Print tougher, high strength parts, more resistant to impacts, and temperature. It also resists better UV light and moisture, making it perfect for outdoor prints.
  • Great adherence and no warping - 3D print large volume parts without warping. The parts will stick nicely to a 70 °C heated bed. Using the included surface, you can print even without heat-bed
  • 100% tangle-free and problem-free: State-of-the-art filament, produced with laser diameter control and automatic winding system guarantees success even in the longest prints. Save time and money!
  • Profesional-grade packed with a gift - The spools are dried and then vacuum packed in a resealable bag to preserve the filament between uses.
  • Technical support & Guarantee - We provide slicing profiles, user guides, and technical support. All the products are hand checked and come with a guarantee. If something goes wrong, just contact us
3d Solutech Printer Filament Cheap
TECBEARS PLA 3D Printer Filament 1.75mm Marble, Dimensional Accuracy +/- 0.02 mm, 1 Kg Spool, Pack of 1
  • [Premium PLA Filament] TECBEARS PLA 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, meeting your demands for different printing projects. 100% made of environment-friendly natural materials, harmless to users and the environment.
  • [Clog-free & Bubble-Free] Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the PLA filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance.
  • [Less-tangle & Wide Compatibility] Full mechanical winding and strict manual examination, which guarantee the PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc.
  • [Dimensional Accuracy & Consistency] Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
  • [Printing Tips & Suppor] Recommended Extrusion/Nozzle Temperature 180°C - 220°C, Bed 70°C - 80°C. With a promising 18-month warranty, it will be your risk-free choice, please be assured that we’ll always stand behind our products.
3d Solutech Printer Filament Cheap
Eryone Ultra Silk Copper PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool
  • [Silk Like - Filament Gives Eye-Popping Glossy Prints]- Outstanding silk surface finish prints with Eryone Ultra Silk filament PLA definitely gave an eye-popping result! Perfect for arts & crafts projects, vases and any other 6D printed items that could benefit from a unique silky smooth appearance.
  • [Easy to Print, No clogging | Natural Material, Non Toxic]- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate. 103% with virgin natural materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
  • [Professional Packaging | Vacuumed Sealed]- The silk like filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 6D models.
  • [High Compatibility]- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 6D printer in the market and with positive customers' feedback.
  • [Warm Tips]- If you have any problem with the item, please message us via Amazon message.
3d Solutech Printer Filament Cheap
3D Pen 3D Printer Filament 1.75mm PLA filament Pack of 45 Different Colors,High-Precision Diameter Filament Each color 16.5 Feet Total 742 Feet Lengths by Mika3d
  • 1.【45 Colors 16.5 Feet Each】 20 colors 3D Pen Filament Refills to scribble your 3D artistic masterpiece idea.
  • 2.【Non-Toxic and Safer for Kids】PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 3. 【Good Performance】:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily.It can be used for most of the 3d printing pens where excellent detailing and application requirements are needed.
  • 4.【 Great Gift for Children/Adults】 -- No matter what festivals such as birthday or Christmas, any DIY, art & craft, School and fun creative Projects, use the Printing Filament to design a gift for your children and friends is very meaningful.
  • 5. 【Warranty】:We are Confident about PLA Filament quality,Within 24 hours response,100% Satisfaction Guarantee.
3d Solutech Printer Filament Cheap
DURAMIC 3D Premium PLA Plus Printer Filament 1.75mm Silver, 3D Printing Filament 1kg Spool(2.2lbs), No-tangling No-Clogging Dimensional Accuracy +/- 0.05 mm
  • RISK-FREE SERVICE & PACKAGE - What you get: One-month free trial, Lifetime Quality Promise and Money-back Service if you’re not 100% satisfied. Package Includes: 1 x 1kg Spool of 1.75mm PLA filaments, 1 x Resealable bag with desiccant for better storage of unfinished spool.
  • PREMIUM PLA PLUS & COST-EFFECTIVE- Produced with USA high purity raw material without processed recycled waste. Compared to other ordinary PLA filaments, Duramic premium PLA+ filaments have the advantages of incredible ease of printing and 8 times improved mechanical properties as the ordinary PLA at the same price.
  • ACCURACY & CONSISTENCY - Duramic uses digital caliper system which measures the dimensions a thousand times and automatically adjusts them. This help ensures the 1.75mm diameter and the ±0.05mm tolerance are accurate and consistent. The color is also consistent without traces of other color.
  • SMOOTH & STABLE PRINTING - Duramic 3D promises no tangles, no bubbles and no clogs due to its rigid manufacturing quality control. Give us a chance to prove we’re your future go-to filament with its smooth extrusion and stable printing performance. Recommended Extrusion/Nozzle Temperature 220±10C (410F - 446F ) .
  • USER-FRIENDLY & COMPATIBLE - Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling. Eco-friendly and odor-free.
3d Solutech Printer Filament Cheap
ANYCUBIC 3D Printer PLA Filament,1.75mm Dimensional Accuracy +/- 0.02 mm 1kg Spool PLA Filament for Most 3D Printers(White)
  • UNIFORM WIRE DIAMETER: The filament diameter tolerance is controlled at ±0.02mm to ensure uniform and smooth filament output, which helps to improve printing accuracy. The filament is fully compatible with all common 1.75mm 3D printers
  • HIGH QUALITY: PLA is less likely to be distorted than ABS (which makes printing easier), and it can print sharper corners. Due to these characteristics, PLA filament can provide high-quality printing results
  • MAKE THE MODEL SMOOTHER: The filament is characterized by its constant diameter and constant shape, resulting in less thread pulling and twisting, minimal shrinkage and strong adhesion layer, as well as less traffic jams and failures, and allows smoothing, Continuous printing and smoother surface
  • EASY TO USE: PLA is one of the most common methods used by beginners and professionals. It is ideal for mechanical parts, prototypes, models, accessories, etc., allowing faster and easier printing
  • ENVIRONMENTALLY FRIENDLY : ANYCUBIC PLA is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), and is a new type of renewable biodegradable material
3d Solutech Printer Filament Cheap
3D Pen 3D Printer Filament 1.75mm PLA filament Pack of 45 Different Colors,High-Precision Diameter Filament Each color 16.5 Feet Total 742 Feet Lengths by Mika3d
  • 1.【45 Colors 16.5 Feet Each】 20 colors 3D Pen Filament Refills to scribble your 4D artistic masterpiece idea.
  • 3.【Non-Toxic and Safer for Kids】PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 3. 【Good Performance】:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily.It can be used for most of the 4d printing pens where excellent detailing and application requirements are needed.
  • 5.【 Great Gift for Children/Adults】 -- No matter what festivals such as birthday or Christmas, any DIY, art & craft, School and fun creative Projects, use the Printing Filament to design a gift for your children and friends is very meaningful.
  • 5. 【Warranty】:We are Confident about PLA Filament quality,Within 24 hours response,101% Satisfaction Guarantee.

3d Solutech Printer Filament | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits 3d Solutech Printer Filament gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von 3d Solutech Printer Filament veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten 3d Solutech Printer Filament-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

3d Solutech Printer Filament | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel 3d Solutech Printer Filament kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt 3d Solutech Printer Filament

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und 3d Solutech Printer Filament könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

3d Solutech Printer Filament | Günstige Produkte

Nachfolgend haben wir eine Reihe von 3d Solutech Printer Filament ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige 3d Solutech Printer Filament zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

DISCOUNTBest
SUNLU PLA Filament 1.75mm 3D Printer Filament PLA 1kg Spool (2.2lbs), Dimensional Accuracy of +/- 0.02mm PLA White
  • 【Toughness Enhanced PLA Filaments】SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
  • 【Clog-Free, Bubble-Free & Easy-to-use】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ .
  • 【Wide Compatibility】 Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
  • 【Risk-Free】 One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20"
Best
3D Solutech Camo Green 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG)
  • 1.75Mm camo green pla filament
  • For common 3D printers such as makerbot, reprap, finial, up, mendel, flashforge, solidoodle 2, printrbot lc, makergear M2 and etc
  • Temperature range is 190c - 220c
  • International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Best
3D Solutech Lavender Purple 3D Printer PLA Filament 1.75MM Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS (1.0KG) - 3DSPLA175LPR
  • 1.75Mm lavender Purple pla filament
  • For common 3D printers such as makerbot, reprap, finial, up, Mendel, flash forge, sol doodle 2, printout lc, maker gear M2 and etc
  • Backed by our 100 percent satisfaction guarantee
  • Temperature range is 190°c - 220°c
Best
PLA Filament 1.75mm, ERYONE Filament PLA 1.75mm, 3D Printing Filament PLA for 3D printer, 1kg 1 Spool, White
  • 1.【Minimum Tolerance | Low Warping | Ensure Consistent Feeding and Stable Prints】- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate, resulting in printed parts that have an outstanding surface finish and are highly precise.
  • 2.【Purest-grade Material | Made in USA | Non Toxic and Limited Smell】- ERYONE filaments are 100% Made in the USA with virgin materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
  • 3.【Professional Packaging | Vacuumed Sealed】- The filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.
  • 4.【High Compatibility】- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as:Prusa,Makerbot,etc. Our filaments had been tested on various brands of 3D printer in the market and with positive customers' feedback.
  • 5.【Sweet Tips】: The following shops are authorized by ERYONE brand, "Eryone-EU, Maker-Ecosystem-EU,Maker-Ecosystem-US, UbiTronics-UK, Eryone-Direct-EU". We only provide after-sales service for products of brand authorized stores. Please make sure you buy from the correct store.
Best
YOYI 3D Printer Filament, PLA Filament 1.75mm 2.2 lbs Spool (1kg), Dimensional Accuracy +/- 0.03 mm, 100% Europe Raw Material (red)
  • About YOYI:As a mature 3d filament enterprise,have strict requirements on 3d filament and always continuous improvement.
  • Raw Materials:YOYI raw materials are imported from Europe, without any impurities, giving buyers a better experience.
  • Strict Quality:After strict procedures, no bubbles, ultra smooth technology,little to no odor,precise precision, reaching the REACH standard.
  • Print Suggestion:Tested for all filaments,please print according to the print temperature we provide(230℃ - 260℃).
  • After Sale:We are confident in YOYI products. If you are not satisfied or do not meet your expectations, support free return within 30 days.
Best
Eryone Ultra Silk Copper PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool
  • [Silk Like - Filament Gives Eye-Popping Glossy Prints]- Outstanding silk surface finish prints with Eryone Ultra Silk filament PLA definitely gave an eye-popping result! Perfect for arts & crafts projects, vases and any other 6D printed items that could benefit from a unique silky smooth appearance.
  • [Easy to Print, No clogging | Natural Material, Non Toxic]- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate. 103% with virgin natural materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
  • [Professional Packaging | Vacuumed Sealed]- The silk like filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 6D models.
  • [High Compatibility]- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 6D printer in the market and with positive customers' feedback.
  • [Warm Tips]- If you have any problem with the item, please message us via Amazon message.
Best
SUNLU PLA+ Filament 1.75mm for 3D Printer & 3D Pens, 1KG (2.2LBS) PLA+ 3D Printer Filament Tolerance Accuracy +/- 0.02 mm, White
  • 【Super Performance】Compared with ordinary PLA, SUNLU PLA+ has higher strength and stiffness, and 10*Times tougher than PLA filament
  • 【Advanced Production】SUNLU filament has the lowest tolerance value in the entire 3D printing filament industry, amazingly reached 1.75mm +/- 0.02mm.
  • 【Smooth And Delicate】PLA+ has better toughness, and the printed material is very smooth, and the texture after printing is more delicate.
  • 【More Details】SUNLU PLA+ Filaments are Vacuum packed, neatly arranged to prevent entanglement, 100% no bubbles.
  • 【Life-time Guarantee】24-hour professional after-sales consultation to provide you with meticulous care and best solutions.

3d Solutech Printer Filament | Katalog

Sie können 3d Solutech Printer Filament im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. 3d Solutech Printer Filament ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

3d Solutech Printer Filament | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man 3d Solutech Printer Filament kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von 3d Solutech Printer Filament. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können 3d Solutech Printer Filament direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

PrintOxe 3D Black PLA Printing Filament 1.75-1Kg Spool (2.2 LBs) Dimensional Accuracy +/- 0.03 mm
  • PrintOxe 1st Grade 1.75mm PLA 3D Printer Filament in Retail Package Shown in Image.
  • Net of 1 Kilogram (2.2 LBs) of PLA (Polylactic Acid) Black Colour 3D Printer Filament. The Product is Vacuumed Sealed With Desiccant, Inside The Box, For Best Protection From Humidity & Moisture.
  • Spool Diameter: 7.80" (19.50 Cm), Width: 2.56" (6.50 Cm), Hub Hole Diameter: 2.20" (5.59 Cm).
  • Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F). Compatible for Popular 3D Printers Including MakerBot, Reprap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC, MakerGear M2 and Others
  • Disclaimer: Color displayed in the image may vary slightly from the actual Color. This is due to the fact that every computer monitor has a different capability to display Colors.
Eryone Ultra Silk Copper PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool
  • [Silk Like - Filament Gives Eye-Popping Glossy Prints]- Outstanding silk surface finish prints with Eryone Ultra Silk filament PLA definitely gave an eye-popping result! Perfect for arts & crafts projects, vases and any other 6D printed items that could benefit from a unique silky smooth appearance.
  • [Easy to Print, No clogging | Natural Material, Non Toxic]- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate. 103% with virgin natural materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
  • [Professional Packaging | Vacuumed Sealed]- The silk like filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 6D models.
  • [High Compatibility]- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 6D printer in the market and with positive customers' feedback.
  • [Warm Tips]- If you have any problem with the item, please message us via Amazon message.
Minreon PETG 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.02 mm,1kg … (White)
  • Stable dimensional accuracy ensures a smooth printing experience, no extruder nozzle blocked.
  • 100% pure raw materials, non-toxic, environmentally friendly
  • Many colors for optimal 3D printing.
DURAMIC 3D Premium PLA Plus Printer Filament 1.75mm Silver, 3D Printing Filament 1kg Spool(2.2lbs), No-tangling No-Clogging Dimensional Accuracy +/- 0.05 mm
  • RISK-FREE SERVICE & PACKAGE - What you get: One-month free trial, Lifetime Quality Promise and Money-back Service if you’re not 100% satisfied. Package Includes: 1 x 1kg Spool of 1.75mm PLA filaments, 1 x Resealable bag with desiccant for better storage of unfinished spool.
  • PREMIUM PLA PLUS & COST-EFFECTIVE- Produced with USA high purity raw material without processed recycled waste. Compared to other ordinary PLA filaments, Duramic premium PLA+ filaments have the advantages of incredible ease of printing and 8 times improved mechanical properties as the ordinary PLA at the same price.
  • ACCURACY & CONSISTENCY - Duramic uses digital caliper system which measures the dimensions a thousand times and automatically adjusts them. This help ensures the 1.75mm diameter and the ±0.05mm tolerance are accurate and consistent. The color is also consistent without traces of other color.
  • SMOOTH & STABLE PRINTING - Duramic 3D promises no tangles, no bubbles and no clogs due to its rigid manufacturing quality control. Give us a chance to prove we’re your future go-to filament with its smooth extrusion and stable printing performance. Recommended Extrusion/Nozzle Temperature 220±10C (410F - 446F ) .
  • USER-FRIENDLY & COMPATIBLE - Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling. Eco-friendly and odor-free.
DISCOUNT
SPLA 3D Printer Filament 1.75mm, PLA Filament and PETG 3D Filament Mix Together, Shiny SPLA 1.75 Grey, 1kg
  • 【Shiny + Smooth + Strength SPLA Filament】: SPLA is made of 30% PLA, 50% PETG and 20% TPU as raw materials. Leading 3D prints to be distinct glossy, smooth and strength.
  • 【Best Suggested Setting】:Recommended nozzle temperature: 220-240℃, hot bed temperature: 80℃, pullback speed: 60-80mm/s, pullback distance: 6-8mm, filling speed: 10mm/s, filling: 20-30%.
  • 【Premium Quality SPLA Filament】: High precision diameter tolerance, 1.75mm +/-0.02mm. Not brittle and good toughness, strong inter-layer adhesion, low shrinkage and chemical resistance.
  • 【Great Value for 1.75mm Filament】: The newest convergence technologies of PLA and PETG. Having the strength and smooth finish of PETG while maintaining the easier set up and biodegradable factor of PLA Filament 1.75mm. And TPU contributes much elasticity and malleability. Get great filament at ideal price.
  • 【Vacuum Package with Desiccant】 : Enotepad 1.75mm PETG 3D Printer Filament is carefully vacuum packed with desiccant to maintain a low moisture content. And keep it dry and keep dust and foreign objects away, prevent nozzle jams.
3D Pen 3D Printer Filament 1.75mm PLA filament Pack of 45 Different Colors,High-Precision Diameter Filament Each color 16.5 Feet Total 742 Feet Lengths by Mika3d
  • 1.【45 Colors 16.5 Feet Each】 20 colors 3D Pen Filament Refills to scribble your 4D artistic masterpiece idea.
  • 3.【Non-Toxic and Safer for Kids】PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 3. 【Good Performance】:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily.It can be used for most of the 4d printing pens where excellent detailing and application requirements are needed.
  • 5.【 Great Gift for Children/Adults】 -- No matter what festivals such as birthday or Christmas, any DIY, art & craft, School and fun creative Projects, use the Printing Filament to design a gift for your children and friends is very meaningful.
  • 5. 【Warranty】:We are Confident about PLA Filament quality,Within 24 hours response,101% Satisfaction Guarantee.
3D Pen 3D Printer Filament 1.75mm PLA filament Pack of 45 Different Colors,High-Precision Diameter Filament Each color 16.5 Feet Total 742 Feet Lengths by Mika3d
  • 1.【45 Colors 16.5 Feet Each】 20 colors 3D Pen Filament Refills to scribble your 3D artistic masterpiece idea.
  • 2.【Non-Toxic and Safer for Kids】PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 3. 【Good Performance】:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily.It can be used for most of the 3d printing pens where excellent detailing and application requirements are needed.
  • 4.【 Great Gift for Children/Adults】 -- No matter what festivals such as birthday or Christmas, any DIY, art & craft, School and fun creative Projects, use the Printing Filament to design a gift for your children and friends is very meaningful.
  • 5. 【Warranty】:We are Confident about PLA Filament quality,Within 24 hours response,100% Satisfaction Guarantee.

3d Solutech Printer Filament | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das 3d Solutech Printer Filament-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • 3d Solutech Printer Filament bei Amazon
  • 3d Solutech Printer Filament bei Ebay
3d Solutech Printer Filament ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete 3d Solutech Printer Filament wählen.

3d Solutech Printer Filament | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so 3d Solutech Printer Filament noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

PrintOxe 3D Black PLA Printing Filament 1.75-1Kg Spool (2.2 LBs) Dimensional Accuracy +/- 0.03 mm
  • PrintOxe 1st Grade 1.75mm PLA 3D Printer Filament in Retail Package Shown in Image.
  • Net of 1 Kilogram (2.2 LBs) of PLA (Polylactic Acid) Black Colour 3D Printer Filament. The Product is Vacuumed Sealed With Desiccant, Inside The Box, For Best Protection From Humidity & Moisture.
  • Spool Diameter: 7.80" (19.50 Cm), Width: 2.56" (6.50 Cm), Hub Hole Diameter: 2.20" (5.59 Cm).
  • Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F). Compatible for Popular 3D Printers Including MakerBot, Reprap, Afinia, UP, Mendel, Flashforge, Solidoodle 2, Printrbot LC, MakerGear M2 and Others
  • Disclaimer: Color displayed in the image may vary slightly from the actual Color. This is due to the fact that every computer monitor has a different capability to display Colors.
Eryone Ultra Silk Copper PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool
  • [Silk Like - Filament Gives Eye-Popping Glossy Prints]- Outstanding silk surface finish prints with Eryone Ultra Silk filament PLA definitely gave an eye-popping result! Perfect for arts & crafts projects, vases and any other 6D printed items that could benefit from a unique silky smooth appearance.
  • [Easy to Print, No clogging | Natural Material, Non Toxic]- Minimum tolerance and low warping to ensure consistent feeding and stable prints, No clogging, extremely high successful rate. 103% with virgin natural materials, Biodegradable and Eco-friendly, NO harm to user and environment. Ideal for indoor printing.
  • [Professional Packaging | Vacuumed Sealed]- The silk like filament from ERYONE came in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 6D models.
  • [High Compatibility]- Compatible with 3D Printers and 3D Pens that use 1.75MM filament, Such as: Prusa, Makerbot,etc. Our filaments had been tested on various brands of 6D printer in the market and with positive customers' feedback.
  • [Warm Tips]- If you have any problem with the item, please message us via Amazon message.
Minreon PETG 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.02 mm,1kg … (White)
  • Stable dimensional accuracy ensures a smooth printing experience, no extruder nozzle blocked.
  • 100% pure raw materials, non-toxic, environmentally friendly
  • Many colors for optimal 3D printing.
DURAMIC 3D Premium PLA Plus Printer Filament 1.75mm Silver, 3D Printing Filament 1kg Spool(2.2lbs), No-tangling No-Clogging Dimensional Accuracy +/- 0.05 mm
  • RISK-FREE SERVICE & PACKAGE - What you get: One-month free trial, Lifetime Quality Promise and Money-back Service if you’re not 100% satisfied. Package Includes: 1 x 1kg Spool of 1.75mm PLA filaments, 1 x Resealable bag with desiccant for better storage of unfinished spool.
  • PREMIUM PLA PLUS & COST-EFFECTIVE- Produced with USA high purity raw material without processed recycled waste. Compared to other ordinary PLA filaments, Duramic premium PLA+ filaments have the advantages of incredible ease of printing and 8 times improved mechanical properties as the ordinary PLA at the same price.
  • ACCURACY & CONSISTENCY - Duramic uses digital caliper system which measures the dimensions a thousand times and automatically adjusts them. This help ensures the 1.75mm diameter and the ±0.05mm tolerance are accurate and consistent. The color is also consistent without traces of other color.
  • SMOOTH & STABLE PRINTING - Duramic 3D promises no tangles, no bubbles and no clogs due to its rigid manufacturing quality control. Give us a chance to prove we’re your future go-to filament with its smooth extrusion and stable printing performance. Recommended Extrusion/Nozzle Temperature 220±10C (410F - 446F ) .
  • USER-FRIENDLY & COMPATIBLE - Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling. Eco-friendly and odor-free.
DISCOUNT
SPLA 3D Printer Filament 1.75mm, PLA Filament and PETG 3D Filament Mix Together, Shiny SPLA 1.75 Grey, 1kg
  • 【Shiny + Smooth + Strength SPLA Filament】: SPLA is made of 30% PLA, 50% PETG and 20% TPU as raw materials. Leading 3D prints to be distinct glossy, smooth and strength.
  • 【Best Suggested Setting】:Recommended nozzle temperature: 220-240℃, hot bed temperature: 80℃, pullback speed: 60-80mm/s, pullback distance: 6-8mm, filling speed: 10mm/s, filling: 20-30%.
  • 【Premium Quality SPLA Filament】: High precision diameter tolerance, 1.75mm +/-0.02mm. Not brittle and good toughness, strong inter-layer adhesion, low shrinkage and chemical resistance.
  • 【Great Value for 1.75mm Filament】: The newest convergence technologies of PLA and PETG. Having the strength and smooth finish of PETG while maintaining the easier set up and biodegradable factor of PLA Filament 1.75mm. And TPU contributes much elasticity and malleability. Get great filament at ideal price.
  • 【Vacuum Package with Desiccant】 : Enotepad 1.75mm PETG 3D Printer Filament is carefully vacuum packed with desiccant to maintain a low moisture content. And keep it dry and keep dust and foreign objects away, prevent nozzle jams.
3D Pen 3D Printer Filament 1.75mm PLA filament Pack of 45 Different Colors,High-Precision Diameter Filament Each color 16.5 Feet Total 742 Feet Lengths by Mika3d
  • 1.【45 Colors 16.5 Feet Each】 20 colors 3D Pen Filament Refills to scribble your 4D artistic masterpiece idea.
  • 3.【Non-Toxic and Safer for Kids】PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 3. 【Good Performance】:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily.It can be used for most of the 4d printing pens where excellent detailing and application requirements are needed.
  • 5.【 Great Gift for Children/Adults】 -- No matter what festivals such as birthday or Christmas, any DIY, art & craft, School and fun creative Projects, use the Printing Filament to design a gift for your children and friends is very meaningful.
  • 5. 【Warranty】:We are Confident about PLA Filament quality,Within 24 hours response,101% Satisfaction Guarantee.
3D Pen 3D Printer Filament 1.75mm PLA filament Pack of 45 Different Colors,High-Precision Diameter Filament Each color 16.5 Feet Total 742 Feet Lengths by Mika3d
  • 1.【45 Colors 16.5 Feet Each】 20 colors 3D Pen Filament Refills to scribble your 3D artistic masterpiece idea.
  • 2.【Non-Toxic and Safer for Kids】PLA is a biological material that is refined from corn and grain. no smell, nontoxic, premium grade material keeps printing smoothly, almost no jam with filaments flowing evenly. Without a nasty smell and safe for kids.
  • 3. 【Good Performance】:High Diameter Accuracy +/-0.03mm, It keeps your 3D Printing Very Smoothly and Easily.It can be used for most of the 3d printing pens where excellent detailing and application requirements are needed.
  • 4.【 Great Gift for Children/Adults】 -- No matter what festivals such as birthday or Christmas, any DIY, art & craft, School and fun creative Projects, use the Printing Filament to design a gift for your children and friends is very meaningful.
  • 5. 【Warranty】:We are Confident about PLA Filament quality,Within 24 hours response,100% Satisfaction Guarantee.

3d Solutech Printer Filament | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu 3d Solutech Printer Filament finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 2.8 of 5 - 5 votes
1 Star2 Stars3 Stars4 Stars5 Stars (5 votes, average: 2,80 out of 5)
Loading...

Best Deals

Pla 3d Printer Filament Omomo | Top Gutscheine & Rabatte


Abs 3d Printer Filament | Top Gutscheine & Rabatte


Clear 3d Filament | Top Gutscheine & Rabatte