Arduino Bluetooth | Top Gutscheine & Rabatte

Latest Arduino Bluetooth
DSD TECH HC-05 Bluetooth Serial Pass-through Module Wireless Serial Communication with Button for Arduino
  • Bluetooth module HC-05 Master and slave Two in one module. Please note: iOS devices (iPhone) are not supported
  • Use the CSR BC417 mainstream bluetooth chip, bluetooth V2.0 SPP protocol standards
  • Module working voltage 3.6 V to 6V
  • Default rate of 9600,default pin:1234, the user can be set up.click the button into AT MODE
  • Can be switched via AT commands as master or slave mode , the device can be connected via AT commands specified
Latest Arduino Bluetooth
DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano
  • Low Energy: With HM-10 bluetooth 4.0 module, you can add Bluetooth features to your project and support iphone4s or later.
  • DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project
  • Led status indication: when the connection is established will always light, disconnection is flash
  • iBeacon Support:You can make this module into ibeacon mode.So you can have your own ibeacon
  • working voltage 3.6 V to 6V,Default rate of 9600.
Latest Arduino Bluetooth
AZDelivery HC-05 Wireless Serial Bluetooth RF Transceiver Pass-Through RS232 Communication Port Module HC05 6 Pin Master-Slave Extender Plate Compatible with Arduino Including E-Book! (Pack of 3)
  • Long range Bluetooth connection distance: the HC-05 Bluetooth module will provide you the connection range up to 10 meters by using Bluetooth class 2, and can be used both as transmitter and receiver which comes in handy for many projects with Arduino or other Microcontrollers
  • Easy operation: Thanks to many ready-to-use open source libraries, this Serial Port Bluetooth Full Duplex Module can be easily programmed in AT mode via the Arduino IDE.
  • Compatible: Using the Serial Port Protocol (SPP) it is easy to pair this handy device with an Arduino and to communicate between two microcontrollers or any device with Bluetooth functionality.
  • High Performance: This Bluetooth module from AZ-Delivery has -80dBm sensitivity, +4dBm RF transmit power, PIO control and UART interface with programmable baud rate.
  • For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Latest Arduino Bluetooth
DSD TECH HC-06 Wireless Bluetooth Serial Transceiver Support Module Slave and Master Mode for Arduino + 4PIN Dupont Cable
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices
  • Running in slave role: Pair with BT dongle and master module. Please note: iOS devices (iPhone) are not supported
  • Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
  • Default serail port setting : 9600 1 Pairing code : 1234
  • Module working voltage 3.3V to 6V
Latest Arduino Bluetooth
Keywish Bluetooth Nano for Arduino Ble Nano V3.0, Mirco USB Board Integrate CC2540 BLE Wireless Module ATmega328P 5V Micro-Controller Board Compatible With Arduino Nano V3.0
  • Creative products, BLE-Nano-Board: Keywish Upgraded nano board for arduino, The main chip is ATMEGA328P-MU QFN32,the latest bootloader (Arduino IDE 1.8.8) was progarmming. It is fully compatible with the common nano board. Works the same as original nano, runs perfectly on Arduino IDE.BLE-Nano-Board is PIN-PIN with Arduino Nano V3.0,and share the same.
  • More convenient for application: Keywish BLE-Nano-Board integrates a CC2540 BLE module with arduino nano v3.0 board, which is very convenient for Bluetooth wireless connect application. Smaller and breadboard-friendly than Diecimila.
  • High quality material and Technology: The bluetooth is used TI CC2540 BLE (SOC) chip. Maximum support 1Mbps air data transfer rate, stable performance.Communication distance can reach 50M in an open environment.
  • Super small volume design, more convenient to use: The PCB size is only 48mm*19mm, the pin is fully compatible with Nano V3.0,No Soldering needed. The micro usb port is more convenient to use.
  • Complete Information reference: If you need data sheets and schematics or other informations, you can download from (https://github.com/keywish/keywish-nano-plus/) ,we provide quick and free support.
Latest Arduino Bluetooth
DSD TECH HM-19 Bluetooth 5.0 BLE Module with CC2640R2F Chip for Arduino and DIY
  • Original HM-19 module, DSD TECH brand guarantees and we accept refund without any excuse.
  • Bluetooth 5.0 BLE Module: The main IC is CC2640R2F from TI,Compared to the Bluetooth 4.0 module, this module has a faster transfer rate and a larger MTU.
  • DSD TECH 6 PIN base Board: leads to VCC, GND, TX, RX,STATE,EN. You can be very convenient to connect to your arduino project or other DIY project
  • DSD TECH offers a free app that lets you quickly integrate this module into your project.Please search "DSD TECH Bluetooth" in Google Play and the Appstore.
  • DSD TECH back this HM-19 Bluetooth 5.0 BLE module with ONE Year WARRANTY and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours
Latest Arduino Bluetooth
WINGONEER HC-05 Wireless Bluetooth Transceiver Modul Slave and Master RS232 with 6 set cable for Arduino
  • Bluetooth module HC-05 Master and slave Two in one module
  • Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards
  • Module working voltage 3.3 V
  • Coupled Mode: Two modules will establish communication automatically when powered. PC hosted mode: Pair the module with bluetooth dongle directly as virtual serial.
  • Note: This is not original Arduino product. it only a substitute accessories from WINGONEER
Latest Arduino Bluetooth
iHaospace 2 Pcs HC-05 Bluetooth Wireless RF Transceiver Module RS232 Serial TTL Wireless Bluetooth Serial Transceiver Module Serial Communication Module for Arduino
  • Bluetooth – Module HC 05 Master and Slave two in one module
  • The CSR – BC417 – Bluetooth – chip, Bluetooth V2.0 spp protocol standards
  • Input voltage: 3.6V--6V
  • With the connection status indicator, LED flash indicates no Bluetooth connection; Led slow flash indicates enter at command mode
  • Effective transmission distance of 10 meters in open area, more than 10 meters is possible, but not to ensure the quality of the connection
Latest Arduino Bluetooth
SeeKool 2 Pcs ESP32 Development Board for Arduino Nodemcu, Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor, Integrated with Antenna RF AMP Filter AP, Compatible CP2012 Module
  • The ESP-WROOM-32 is a versatile Wi-Fi + BT + BLE MCU module that is powerful, versatile and can be used for low power sensor networks and demanding tasks such as voice coding, audio streaming and MP3 Decoding and so on. ESP32 is a safe, reliable, and scalable to a variety of applications.
  • This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,power and RF properties best,which is safe,reliable,and scalable to a variety of applications. The 2.4GHz Wi-Fi plus Bluetooth dual-mode chip is reliable, scalable and adaptive. Two CPU cores can be individually controlled or powered on.
  • Small volume, easy to embed to other products. ESP32 integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules. The entire solution occupies the least printed circuit board area.
  • Supports the development of Windows systems (cygwin and msys32 simulation environments) and Linux systems. Supporting three modes:AP,STA,and AP+STA, supporting Lua program. Ultra-Low power consumption, works perfectly with the Arduino IDE.
  • ESP32 also integrates a wealth of peripherals, including capacitive touch sensors, Hall sensors, low noise sensor, SD card interface, Ethernet interface, high-speed SDIO / SPI, UART, I2S and I2C.
Latest Arduino Bluetooth
KEYESTUDIO 4DOF Robot Arm Kit DIY, Electronic Coding Robotics w/Servo, Joystick Controlled, Bluetooth Controlled, PS2 Controlled,Tutorials for Arduino IDE (NO Controller)
  • It’s programming arm robot for 12+ years old children, you can easily to use it to introduce physical learning, logic, building skills, and problem solving
  • Exquisite packaging contains high quality and Children-friendly hardware, assembly tools and comprehensive usage instructions
  • There are 3 controlling methods are as follows: 1) Controlling through Wired JoyStick (included in the kit)
  • Phone Bluetooth Controlling (note: Not Included HC-06 Bluetooth module, we only provide the code for Bluetooth and APP
  • Wireless PS2 JoyStick Control (note: Not Included PS2 JoyStick module, we only provide the code)

Arduino Bluetooth | Bewertung

Auf dieser Seite finden Sie die Liste der besten Arduino Bluetooth mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

Arduino Bluetooth | Details und aktive Angebote

Hier ist die Tabelle der besten Arduino Bluetooth. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

Arduino Bluetooth Cheap
Socobeta ESP-32 Module Charging Module High-sensitivity Durable Compatible with Arduino/MicroPython
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • The lastest ESP32 version is REV1, and its performance is better.
Arduino Bluetooth Cheap
Socobeta Portable Lithium Battery Interface 500mA 4MB Flash WiFi Bluetooth ESP-32 Module Charging Module Compatible with Arduino/MicroPython
  • The lastest ESP32 version is REV1, and its performance is better.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • Lithium battery interface, 500mA maximum charging current.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
Arduino Bluetooth Cheap
Socobeta Lithium Battery Interface Bluetooth 4MB Flash Charging Module ESP-32 Module Compatible with Arduino/MicroPython
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
Arduino Bluetooth Cheap
Socobeta Lithium Battery Interface WiFi Charging Module Durable ESP-32 Module Compatible with Arduino/MicroPython
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Arduino Bluetooth Cheap
Socobeta Lithium Battery Interface 4MB Flash 500mA ESP-32 Module High-sensitivity Charging Module Bluetooth Durable Portable Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Lithium battery interface, 500mA maximum charging current.
  • The lastest ESP32 version is REV1, and its performance is better.
Arduino Bluetooth Cheap
Socobeta Lithium Battery Interface 4MB Flash WiFi ESP-32 Module 500mA Portable Charging Module Bluetooth High-sensitivity Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
Arduino Bluetooth Cheap
Socobeta High-sensitivity WiFi ESP-32 Module Charging Module 500mA Compatible with Arduino/MicroPython
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Arduino Bluetooth Cheap
Socobeta High-sensitivity 500mA WiFi 4MB Flash ESP-32 Module Charging Module Bluetooth Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Arduino Bluetooth Cheap
Socobeta Bluetooth Charging Module Lithium Battery Interface Portable ESP-32 Module Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
Arduino Bluetooth Cheap
Socobeta ESP-32 Module Portable Charging Module 4MB Flash Bluetooth Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.

Arduino Bluetooth | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits Arduino Bluetooth gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von Arduino Bluetooth veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten Arduino Bluetooth-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

Arduino Bluetooth | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel Arduino Bluetooth kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt Arduino Bluetooth

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und Arduino Bluetooth könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

Arduino Bluetooth | Günstige Produkte

Nachfolgend haben wir eine Reihe von Arduino Bluetooth ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige Arduino Bluetooth zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

Best
DSD TECH HC-05 Bluetooth Serial Pass-through Module Wireless Serial Communication with Button for Arduino
  • Bluetooth module HC-05 Master and slave Two in one module. Please note: iOS devices (iPhone) are not supported
  • Use the CSR BC417 mainstream bluetooth chip, bluetooth V2.0 SPP protocol standards
  • Module working voltage 3.6 V to 6V
  • Default rate of 9600,default pin:1234, the user can be set up.click the button into AT MODE
  • Can be switched via AT commands as master or slave mode , the device can be connected via AT commands specified
Best
DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Module with 4PIN Base Board for Arduino UNO R3 Mega 2560 Nano
  • Low Energy: With HM-10 bluetooth 4.0 module, you can add Bluetooth features to your project and support iphone4s or later.
  • DSD TECH Brand 4pin Base Board: Through this base board, leads to VCC, GND, TX, RX. You can be very convenient to connect to your arduino project
  • Led status indication: when the connection is established will always light, disconnection is flash
  • iBeacon Support:You can make this module into ibeacon mode.So you can have your own ibeacon
  • working voltage 3.6 V to 6V,Default rate of 9600.
Best
AZDelivery HC-05 Wireless Serial Bluetooth RF Transceiver Pass-Through RS232 Communication Port Module HC05 6 Pin Master-Slave Extender Plate Compatible with Arduino Including E-Book! (Pack of 3)
  • Long range Bluetooth connection distance: the HC-05 Bluetooth module will provide you the connection range up to 10 meters by using Bluetooth class 2, and can be used both as transmitter and receiver which comes in handy for many projects with Arduino or other Microcontrollers
  • Easy operation: Thanks to many ready-to-use open source libraries, this Serial Port Bluetooth Full Duplex Module can be easily programmed in AT mode via the Arduino IDE.
  • Compatible: Using the Serial Port Protocol (SPP) it is easy to pair this handy device with an Arduino and to communicate between two microcontrollers or any device with Bluetooth functionality.
  • High Performance: This Bluetooth module from AZ-Delivery has -80dBm sensitivity, +4dBm RF transmit power, PIO control and UART interface with programmable baud rate.
  • For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Best
Keywish Bluetooth Nano for Arduino Ble Nano V3.0, Mirco USB Board Integrate CC2540 BLE Wireless Module ATmega328P 5V Micro-Controller Board Compatible With Arduino Nano V3.0
  • Creative products, BLE-Nano-Board: Keywish Upgraded nano board for arduino, The main chip is ATMEGA328P-MU QFN32,the latest bootloader (Arduino IDE 1.8.8) was progarmming. It is fully compatible with the common nano board. Works the same as original nano, runs perfectly on Arduino IDE.BLE-Nano-Board is PIN-PIN with Arduino Nano V3.0,and share the same.
  • More convenient for application: Keywish BLE-Nano-Board integrates a CC2540 BLE module with arduino nano v3.0 board, which is very convenient for Bluetooth wireless connect application. Smaller and breadboard-friendly than Diecimila.
  • High quality material and Technology: The bluetooth is used TI CC2540 BLE (SOC) chip. Maximum support 1Mbps air data transfer rate, stable performance.Communication distance can reach 50M in an open environment.
  • Super small volume design, more convenient to use: The PCB size is only 48mm*19mm, the pin is fully compatible with Nano V3.0,No Soldering needed. The micro usb port is more convenient to use.
  • Complete Information reference: If you need data sheets and schematics or other informations, you can download from (https://github.com/keywish/keywish-nano-plus/) ,we provide quick and free support.
Best
DSD TECH HC-06 Wireless Bluetooth Serial Transceiver Support Module Slave and Master Mode for Arduino + 4PIN Dupont Cable
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices
  • Running in slave role: Pair with BT dongle and master module. Please note: iOS devices (iPhone) are not supported
  • Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer.
  • Default serail port setting : 9600 1 Pairing code : 1234
  • Module working voltage 3.3V to 6V
Best
DSD TECH HM-19 Bluetooth 5.0 BLE Module with CC2640R2F Chip for Arduino and DIY
  • Original HM-19 module, DSD TECH brand guarantees and we accept refund without any excuse.
  • Bluetooth 5.0 BLE Module: The main IC is CC2640R2F from TI,Compared to the Bluetooth 4.0 module, this module has a faster transfer rate and a larger MTU.
  • DSD TECH 6 PIN base Board: leads to VCC, GND, TX, RX,STATE,EN. You can be very convenient to connect to your arduino project or other DIY project
  • DSD TECH offers a free app that lets you quickly integrate this module into your project.Please search "DSD TECH Bluetooth" in Google Play and the Appstore.
  • DSD TECH back this HM-19 Bluetooth 5.0 BLE module with ONE Year WARRANTY and lifetime technical support. If you meet any question, please contact us, we will fix your issue within 24 hours
Best
DSD TECH SH-HC-08 Bluetooth 4.0 BLE Slave Module to UART Transceiver for Arduino Compatible with iOS
  • It is a bluetooth 4.0 ble module with 6 PIN baseboard for Arduino also for your DIY wireless project. leads interface includes VCC, GND, txd, rxd , status, EN
  • Only Slave mode. Compatible with iPhone 4s/5/5s 6/6s and android phones 4.3 or later. For iOS devices, please install LightBlue . For Android devices please download "DSD TECH Bluetooth" or "BLE Scanner" APP.
  • Main chip is cc2541F256 manufactured by TI. if you are MCU pro, you can program it by cc-debugger.
  • Default rate : 9600, and You can modify the baud rate and the Bluetooth name via the at command.
  • Working voltage 3.3V to 6V. one year warranty

Arduino Bluetooth | Katalog

Sie können Arduino Bluetooth im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. Arduino Bluetooth ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

Arduino Bluetooth | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man Arduino Bluetooth kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von Arduino Bluetooth. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können Arduino Bluetooth direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

Socobeta Lithium Battery Interface 4MB Flash 500mA ESP-32 Module High-sensitivity Charging Module Bluetooth Durable Portable Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Lithium battery interface, 500mA maximum charging current.
  • The lastest ESP32 version is REV1, and its performance is better.
Socobeta Lithium Battery Interface 4MB Flash WiFi ESP-32 Module 500mA Portable Charging Module Bluetooth High-sensitivity Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
Socobeta High-sensitivity WiFi ESP-32 Module Charging Module 500mA Compatible with Arduino/MicroPython
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Socobeta High-sensitivity 500mA WiFi 4MB Flash ESP-32 Module Charging Module Bluetooth Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Socobeta Bluetooth Charging Module Lithium Battery Interface Portable ESP-32 Module Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
Socobeta ESP-32 Module Portable Charging Module 4MB Flash Bluetooth Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Socobeta ESP-32 Module Charging Module High-sensitivity Durable Compatible with Arduino/MicroPython
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • The lastest ESP32 version is REV1, and its performance is better.

Arduino Bluetooth | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das Arduino Bluetooth-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • Arduino Bluetooth bei Amazon
  • Arduino Bluetooth bei Ebay
Arduino Bluetooth ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete Arduino Bluetooth wählen.

Arduino Bluetooth | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so Arduino Bluetooth noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

Socobeta Lithium Battery Interface 4MB Flash 500mA ESP-32 Module High-sensitivity Charging Module Bluetooth Durable Portable Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Lithium battery interface, 500mA maximum charging current.
  • The lastest ESP32 version is REV1, and its performance is better.
Socobeta Lithium Battery Interface 4MB Flash WiFi ESP-32 Module 500mA Portable Charging Module Bluetooth High-sensitivity Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
Socobeta High-sensitivity WiFi ESP-32 Module Charging Module 500mA Compatible with Arduino/MicroPython
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Socobeta High-sensitivity 500mA WiFi 4MB Flash ESP-32 Module Charging Module Bluetooth Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Socobeta Bluetooth Charging Module Lithium Battery Interface Portable ESP-32 Module Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
Socobeta ESP-32 Module Portable Charging Module 4MB Flash Bluetooth Compatible with Arduino/MicroPython
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • The lastest ESP32 version is REV1, and its performance is better.
  • Lithium battery interface, 500mA maximum charging current.
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
Socobeta ESP-32 Module Charging Module High-sensitivity Durable Compatible with Arduino/MicroPython
  • Compatible with for Arduino / MicroPython. Default firmware is lastest for MicroPytho.
  • It is a for Espressif official ESP32-WROOM-32 module, and its quality is assured.
  • With 4MB flash, the transmission rate is fast and stable, providing better user experience.
  • Lithium battery interface, 500mA maximum charging current.
  • The lastest ESP32 version is REV1, and its performance is better.

Arduino Bluetooth | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu Arduino Bluetooth finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 3.58 of 5 - 12 votes
1 Star2 Stars3 Stars4 Stars5 Stars (12 votes, average: 3,58 out of 5)
Loading...

Best Deals

Arduino Esp8266 | Top Gutscheine & Rabatte


Arduino Board | Top Gutscheine & Rabatte


Arduino Nano R3 | Top Gutscheine & Rabatte