Arduino Current Sensor | Top Gutscheine & Rabatte

Latest Arduino Current Sensor
iHaospace 2 X 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino Raspberry Pi
  • Product Name : Current Sensor Module; Model : ACS712 Range Current : 30A
  • Current sensor chip: ACS712ELC-30A
  • The module can measure the positive and negative 20 amps, corresponding to the analog output 100mV / A
  • There is no the detection current through, the output voltage is VCC / 2
  • The PCB board size: 31 (mm) x13 (mm)
Latest Arduino Current Sensor
UEETEK SCT-013-000 Non-Invasive AC Current Sensor Split Core Transformer 100A for Arduino Project
  • Mechanical strength: opening and closing times, no less than 1000 times (20 C).
  • Safety indicators: Dielectric strength 6000V AC/1min.
  • Meet UL94-V0 flame retardant properties.
  • Applications: for AC motors, lighting equipment, air compressors and other current measurement, monitoring and protection.
  • Size: Approx. 5.7 * 3.2 * 2.1cm/ 2.2 * 1.3 * 0.83 inch (L*W*H).
Latest Arduino Current Sensor
Youmile 5 Pack ACS712 5A range Current Sensor Module for Arduino
  • the current sensor chips: ACS712ELC-20A;
  • pin 5V power supply, on-board power indicator;
  • the module can measure the positive and negative 5 amps, corresponding to the analog output 100mV / A;
  • no test current through the output voltage is VCC / 2;
  • PCB board size: 31 (mm) x13 (mm);
Latest Arduino Current Sensor
AZDelivery 3 x ACS712 30A Range Current Sensor Measuring Module for Arduino Bascom including eBook
  • This current sensor ACS712 can measure current up to 30A and is easy to install thanks to its compact dimensions.
  • This range module contains the Current Sensor Chip ACS712ELC-30A.
  • AZDelivery guarantees 100% compatibility with Arduino Bascom.
  • Our AZDelivery current sensor is suitable for the measuring range from -30A to +30A // Output (mV): 185mV/A.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Latest Arduino Current Sensor
iHaospace 2 X 20A Range Electrical Parts Current Sensor Module ACS712 for Arduino Raspberry Pi
  • Product Name : Current Sensor Module; Model : ACS712 Range Current : 20A
  • Current sensor chip: ACS712ELC-20A
  • The module can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A
  • There is no the detection current through, the output voltage is VCC / 2
  • The PCB board size: 31 (mm) x13 (mm)
Latest Arduino Current Sensor
Gikfun DIY 5A Range AC Current Transformer Module Current Sensor Module for Arduino Electronic Beginner DIY (Pack of 5 Sets) EK1344x5U
  • It's diy kits, need to solder by yourself.
  • Onboard precision micro current transformer. Onboard sampling resistor
  • The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA
  • Pack of 5 Sets
  • We'd like to receive your valuable suggestions for our products and make your idea come true.
Latest Arduino Current Sensor
JZK CJMCU-219 INA219 I2C Interface Bidirectional DC Current/Power Monitoring Sensor Module for Arduino Raspberry Pi
  • The INA219 offers the industry's highest accuracy and smallest size, not only to monitor the pressure on the shunt resistor, to sense the shunt supply voltage, but also to calculate the power supply.
  • The device is available in a SOT23 package to provide small, low-cost solutions for digital current sensing of servers, laptops, power supplies, battery management, and automotive and telecom equipment.
  • The INA219 achieves a maximum error accuracy of 1% over the -40 ° C to + 85 ° C temperature range with a maximum offset of 100 uV.
  • The high precision of the product combines the advantages of 12-bit resolution to help customers minimize the pressure on the shunt resistor, thus minimizing power loss and power consumption and saving board space.
  • The I2C interface has a timeout setting that not only prevents bus lockout, but also provides high-speed mode for up to 3.4 MHz communication requirements.
Latest Arduino Current Sensor
Stemedu DC0-25V Voltage Detection Module Voltage Sensor for Arduino Raspberry Pi (pack of 5pcs)
  • This module is based on a resistive divider principle design, make the interface terminal input voltage reduced 5 times, Arduino analog input voltage up to 5V, then the input voltage of the voltage detection module can not be greater than 5V × 5 = 25V
  • Because Arduino AVR chips used in 10 AD, so the resolution of the analog module is 0.00489V (5V / 1023), so the voltage detection module detects a minimum input voltage of 0.00489V × 5 = 0.02445V
  • Voltage input range: DC0-25V; Voltage detection range: DC0.02445V-25V ; Voltage Analog Resolution: 0.00489V
  • Document link: https://www.instructables.com/id/Arduino-Voltage-Sensor-0-25V/
  • How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us
Latest Arduino Current Sensor
ARCELI 30A SCT-013-030 Non-invasive Sensor Split Core AC Current Transformer
  • Applicable for current measurement, monitoring, and protection of the following devices:AC motor,Air compressor,Lighting equipment.
  • Input Current: 0~30A AC ,Output Voltage: 0~1V ,Work Frequency: 50 ~ 1KHz,Secondary Coil: 1800 +- 2T,Accuracy: +-1%, Non-linearity: +- 3%.
  • Build-in sampling resistance(RL): 62Ω,Resistance Grade: Grade B,Work Temperature: -13F~ +158F (-25C ~ +70C).
  • Safety indicators:Dielectric Strength(between shell and output) 1000V AC/1min 5mA,Fire resistance property: In accordance with UL94-VO.
  • Leading Wire in Length 1m,Open Size: 13mm x 13mm.Model:SCT013-030
Latest Arduino Current Sensor
AZDelivery ACS712 5A Range Current Sensor Measuring Module for Arduino Bascom including eBook
  • AZ-Delivery ACS712 5A Range Current Sensor Measuring Module for Arduino can measure current up to 5 Amperes, and are 100% compatibile with Arduino Bascom.
  • This ACS712 5A Range Current Sensor Measuring Module for Arduino comes with the Current Sensor Chip ACS712ELC-05B.
  • These Current sensors are suitable for the measuring range from: -5A to +5A, and Output (mV) is: 185mV / A.
  • Thanks to compact dimensions and design, AZ-Delivery ACS712 5A Range Current Sensor Measuring Modules for Arduino are simple and easy to install and use.
  • Of course, with the purchase from AZ-Delivery Vertriebs GmbH you will automatically receive an invoice including VAT by British standards, and the high AZ-Delivery quality and fast delivery directly from our UK warehouse including free eBook for your project .

Arduino Current Sensor | Bewertung

Auf dieser Seite finden Sie die Liste der besten Arduino Current Sensor mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

Arduino Current Sensor | Details und aktive Angebote

Hier ist die Tabelle der besten Arduino Current Sensor. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

Arduino Current Sensor Cheap
2 x Max471 Voltage Current Sensor Votage Sensor Current Sensor Module for Arduino Current Voltage Tester 5V DC 3-25V 0-3A Board
  • This module can be used to test the current and voltage.
  • The principle of voltage test based on principle of resistive voltage divider design
  • The MAX471 chip on the board used to test the consume current of the load.
  • Test Voltage range: DC3 - 25V (FOR Arduino work on 5V) or DC3 - 16.5V (for Arduino work on 3.3V)
  • Test Current range: DC 0 - 3A
Arduino Current Sensor Cheap
Joyfulstore- 4Pcs Tire Pressure Sensor Valve Stem Tpms Replacement for Mazda for Jeep Dodge
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service. RELATED SEARCHES [Cap Tire for Toyota, 3d Sonic, For Pressure Sensor, Display Led White, for Bmw Logo Tire, Pressure Sensor for Nissan, Cap for Honda Car, Car Tpms For Android, Phase Sensor, Internal Sensor For Tpms, 6 Gj, for Arduino Mq2, for Lexus Pressure Sensor, Cap Valve Car Logo, Cap for Toyota]
  • The car & motorcycle accessorries category include: Replacement Parts Tools & Equipment, Motorcycle Brake System, Exhaust Filters Fuel Ignition Shocks Lighting Chassis Wiper Blades. RELATED SEARCHES [Valve For Tyre Car Emblem, Android Tyre, 28mm Wall, Android Tire, for Kia Tire Valve, Cap for Volvo, Ice Santa, for Peugeot 3008 Tire, Soldiers Of The Body, Pressure Sensor For Android, Air for Jaguar, For Tpms Sensor]
  • FREE SHIPPING: 99% conventional orders will be delivered within 15-17 days. Other brand is not reliable. RELATED SEARCHES [Sensor Vacuum, Line Sensor, Tpms To Android, Cap Valve Car Logo, In Tpms, for Honda K, Cap for Hyundai Valve, Breath Test, Valve For Tyre Car Emblem, Android Tyre, Range Sensor Module, Cap Tire for Toyota, 3d Sonic]
  • Worry-free Service: If you don’t like this product or receive defective one, you can contact us! Your email feedback will help us get it solved at the first time. Every product guaranties 1 year warranty!!! RELATED SEARCHES [Car Tpms For Android, Phase Sensor, Internal Sensor For Tpms, Cap Tire for Toyota, 6 Gj, for Arduino Mq2, Pressure Sensor for Nissan, for Lexus Pressure Sensor, Cap Valve Car Logo]
  • Don't hesitate, Scroll to the top now and click Add to Cart to take this amazing product today!!! RELATED SEARCHES [Ice Santa, for Peugeot 3008 Tire, Soldiers Of The Body, Android Tire, Pressure Sensor For Android, Air for Jaguar, For Tpms Sensor, Clamp Current Sensor, Cap for Volvo, Internal Sensor For Tpms, 433mhz Tire Pressure Sensor, for Audi Tire, Cap for Hyundai Valve, 6 Gj, Sensor Vacuum, Line Sensor]
Arduino Current Sensor Cheap
TMD27713 ALS infrared LED Optical Proximity Detection Module Face Proximity Detection Module Distance Lighting Sensor Module for Arduino
  • Module Name: Face Proximity Detection Module , Distance Illumination Sensor Module.
  • Module chip: TMD27713. Detection distance 100mm.
  • Ambient light + proximity sensor + infrared LED triple sensor TMD2771X used in mobile phones mainly serves two functions:
  • One function is used to detect the current ambient light brightness (ALS); and the software adjusts the backlight brightness automatically according to the current ambient light brightness conditions to adapt to the ambient brightness; the backlight brightness is soft to protect the eyesight Achieve the effect of saving electricity .
  • Another function, we call the Proximity Sensing function (PROX) uses the internal LED to emit infrared reflections and sensor built-in PD to determine whether the phone is close to the human face during the call, to determine the backlight status and touch-screen button status is ON /OFF.
Arduino Current Sensor Cheap
1kg 5kg 10kg 20kg Load Cell and HX711 Combo Pack Kit - Load cell amplifier ADC weight sensor for Arduino scale (10kg+HX711)
  • Load cell:Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-5kg/ 5kg /10kg /20kg.
  • HX711 :This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller (like an Arduino or Raspberry Pi).
  • Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
  • HX711 specs: Operation Voltage: 2.7V-5V ; Operation Current: < 1.5mA ; Selectable 10SPS or 80SPS output data rate ; Includes breakaway headers for connection, soldering required.
  • Please choose the correct specification before buying. (A total of four specifications).Please refer to the picture on the left of this page for the product wiring diagram.
Arduino Current Sensor Cheap
WYPH Mini Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board for Arduino Without USB Cable (Not-soldered Nano 3pcs)
  • The header pins haven't been soldered for this package and it comes without usb cable.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
Arduino Current Sensor Cheap
WYPH Mini Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino (Pre-soldered Nano 3pcs)
  • The header pins has been soldered for this package and it comes with 3pcs USB Cables.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
Arduino Current Sensor Cheap
01 02 015 Submersible Level Sensor,4-20mA Throw-In Type Liquid Level Sensor For Detecting 0-5m Range Depth 24V DC Input Liquid Level Transmitter for Detecting 0-5m Range Liquid Level
  • This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology.
  • The level transmitter receives different pressures at different depths of liquid, which can be converted into corresponding current signals and output through the sensor. In this way, the depth of liquid can be measured.
  • The shell of the transmitter is made of stainless steel, anti-corrosion and easy to clean. It can be directly placed in the liquid like water, oil or even mash with large viscosity. This product can provide a steady performance in all sorts of measurement conditions such as river, reservoir, city water supply, groundwater in urban, and basin.
  • Recommended purchase it : Analog Current to Voltage Converter. The converter can convert current into voltage signal which can be read by your Arduino controllers or other controllers. The throw-in type liquid level transmitter can be used in waterworks, refinery, sewage disposal work, construction, light industry, mechanical and so on.
  • Any technical issues after purchase please contact with our tech-support team.
Arduino Current Sensor Cheap
Elektor Arduino Home Automation Bundle
  • Arduino.
  • Projects
  • Starter kit.
  • RFID.
Arduino Current Sensor Cheap
L-Yune,bolt 1pc Mini 4-Channel Motor Drive Shield Expansion Board L293D Module High Voltage Current Module For Arduino UNO MEGA 2560
  • The Device is a mnolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power transistors .
  • To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included.
  • This device is suitable for use in switching applications at frequencies up to 5 kHz.
  • ENABLE FACILITY.OVERTEMPERATURE PROTECTION
  • 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
Arduino Current Sensor Cheap
Elektor AVR Playground Bundle
  • Microcontrollers
  • Arduino.
  • AVR
  • Projects

Arduino Current Sensor | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits Arduino Current Sensor gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von Arduino Current Sensor veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten Arduino Current Sensor-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

Arduino Current Sensor | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel Arduino Current Sensor kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt Arduino Current Sensor

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und Arduino Current Sensor könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

Arduino Current Sensor | Günstige Produkte

Nachfolgend haben wir eine Reihe von Arduino Current Sensor ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige Arduino Current Sensor zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

Best
iHaospace 2 X 30A Range Electrical Parts Current Sensor Module ACS712 for Arduino Raspberry Pi
  • Product Name : Current Sensor Module; Model : ACS712 Range Current : 30A
  • Current sensor chip: ACS712ELC-30A
  • The module can measure the positive and negative 20 amps, corresponding to the analog output 100mV / A
  • There is no the detection current through, the output voltage is VCC / 2
  • The PCB board size: 31 (mm) x13 (mm)
Best
UEETEK SCT-013-000 Non-Invasive AC Current Sensor Split Core Transformer 100A for Arduino Project
  • Mechanical strength: opening and closing times, no less than 1000 times (20 C).
  • Safety indicators: Dielectric strength 6000V AC/1min.
  • Meet UL94-V0 flame retardant properties.
  • Applications: for AC motors, lighting equipment, air compressors and other current measurement, monitoring and protection.
  • Size: Approx. 5.7 * 3.2 * 2.1cm/ 2.2 * 1.3 * 0.83 inch (L*W*H).
Best
Youmile 5 Pack ACS712 5A range Current Sensor Module for Arduino
  • the current sensor chips: ACS712ELC-20A;
  • pin 5V power supply, on-board power indicator;
  • the module can measure the positive and negative 5 amps, corresponding to the analog output 100mV / A;
  • no test current through the output voltage is VCC / 2;
  • PCB board size: 31 (mm) x13 (mm);
Best
ARCELI 30A SCT-013-030 Non-invasive Sensor Split Core AC Current Transformer
  • Applicable for current measurement, monitoring, and protection of the following devices:AC motor,Air compressor,Lighting equipment.
  • Input Current: 0~30A AC ,Output Voltage: 0~1V ,Work Frequency: 50 ~ 1KHz,Secondary Coil: 1800 +- 2T,Accuracy: +-1%, Non-linearity: +- 3%.
  • Build-in sampling resistance(RL): 62Ω,Resistance Grade: Grade B,Work Temperature: -13F~ +158F (-25C ~ +70C).
  • Safety indicators:Dielectric Strength(between shell and output) 1000V AC/1min 5mA,Fire resistance property: In accordance with UL94-VO.
  • Leading Wire in Length 1m,Open Size: 13mm x 13mm.Model:SCT013-030
Best
AZDelivery 3 x ACS712 30A Range Current Sensor Measuring Module for Arduino Bascom including eBook
  • This current sensor ACS712 can measure current up to 30A and is easy to install thanks to its compact dimensions.
  • This range module contains the Current Sensor Chip ACS712ELC-30A.
  • AZDelivery guarantees 100% compatibility with Arduino Bascom.
  • Our AZDelivery current sensor is suitable for the measuring range from -30A to +30A // Output (mV): 185mV/A.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Best
JZK CJMCU-219 INA219 I2C Interface Bidirectional DC Current/Power Monitoring Sensor Module for Arduino Raspberry Pi
  • The INA219 offers the industry's highest accuracy and smallest size, not only to monitor the pressure on the shunt resistor, to sense the shunt supply voltage, but also to calculate the power supply.
  • The device is available in a SOT23 package to provide small, low-cost solutions for digital current sensing of servers, laptops, power supplies, battery management, and automotive and telecom equipment.
  • The INA219 achieves a maximum error accuracy of 1% over the -40 ° C to + 85 ° C temperature range with a maximum offset of 100 uV.
  • The high precision of the product combines the advantages of 12-bit resolution to help customers minimize the pressure on the shunt resistor, thus minimizing power loss and power consumption and saving board space.
  • The I2C interface has a timeout setting that not only prevents bus lockout, but also provides high-speed mode for up to 3.4 MHz communication requirements.
Best
iHaospace 2 X 20A Range Electrical Parts Current Sensor Module ACS712 for Arduino Raspberry Pi
  • Product Name : Current Sensor Module; Model : ACS712 Range Current : 20A
  • Current sensor chip: ACS712ELC-20A
  • The module can measure the positive and negative 30 amps, corresponding to the analog output 66mV / A
  • There is no the detection current through, the output voltage is VCC / 2
  • The PCB board size: 31 (mm) x13 (mm)

Arduino Current Sensor | Katalog

Sie können Arduino Current Sensor im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. Arduino Current Sensor ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

Arduino Current Sensor | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man Arduino Current Sensor kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von Arduino Current Sensor. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können Arduino Current Sensor direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

WYPH Mini Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino (Pre-soldered Nano 3pcs)
  • The header pins has been soldered for this package and it comes with 3pcs USB Cables.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
WYPH Mini Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board for Arduino Without USB Cable (Not-soldered Nano 3pcs)
  • The header pins haven't been soldered for this package and it comes without usb cable.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
1kg 5kg 10kg 20kg Load Cell and HX711 Combo Pack Kit - Load cell amplifier ADC weight sensor for Arduino scale (10kg+HX711)
  • Load cell:Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-5kg/ 5kg /10kg /20kg.
  • HX711 :This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller (like an Arduino or Raspberry Pi).
  • Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
  • HX711 specs: Operation Voltage: 2.7V-5V ; Operation Current: < 1.5mA ; Selectable 10SPS or 80SPS output data rate ; Includes breakaway headers for connection, soldering required.
  • Please choose the correct specification before buying. (A total of four specifications).Please refer to the picture on the left of this page for the product wiring diagram.
TMD27713 ALS infrared LED Optical Proximity Detection Module Face Proximity Detection Module Distance Lighting Sensor Module for Arduino
  • Module Name: Face Proximity Detection Module , Distance Illumination Sensor Module.
  • Module chip: TMD27713. Detection distance 100mm.
  • Ambient light + proximity sensor + infrared LED triple sensor TMD2771X used in mobile phones mainly serves two functions:
  • One function is used to detect the current ambient light brightness (ALS); and the software adjusts the backlight brightness automatically according to the current ambient light brightness conditions to adapt to the ambient brightness; the backlight brightness is soft to protect the eyesight Achieve the effect of saving electricity .
  • Another function, we call the Proximity Sensing function (PROX) uses the internal LED to emit infrared reflections and sensor built-in PD to determine whether the phone is close to the human face during the call, to determine the backlight status and touch-screen button status is ON /OFF.
01 02 015 Submersible Level Sensor,4-20mA Throw-In Type Liquid Level Sensor For Detecting 0-5m Range Depth 24V DC Input Liquid Level Transmitter for Detecting 0-5m Range Liquid Level
  • This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology.
  • The level transmitter receives different pressures at different depths of liquid, which can be converted into corresponding current signals and output through the sensor. In this way, the depth of liquid can be measured.
  • The shell of the transmitter is made of stainless steel, anti-corrosion and easy to clean. It can be directly placed in the liquid like water, oil or even mash with large viscosity. This product can provide a steady performance in all sorts of measurement conditions such as river, reservoir, city water supply, groundwater in urban, and basin.
  • Recommended purchase it : Analog Current to Voltage Converter. The converter can convert current into voltage signal which can be read by your Arduino controllers or other controllers. The throw-in type liquid level transmitter can be used in waterworks, refinery, sewage disposal work, construction, light industry, mechanical and so on.
  • Any technical issues after purchase please contact with our tech-support team.
Elektor AVR Playground Bundle
  • Microcontrollers
  • Arduino.
  • AVR
  • Projects
2 x Max471 Voltage Current Sensor Votage Sensor Current Sensor Module for Arduino Current Voltage Tester 5V DC 3-25V 0-3A Board
  • This module can be used to test the current and voltage.
  • The principle of voltage test based on principle of resistive voltage divider design
  • The MAX471 chip on the board used to test the consume current of the load.
  • Test Voltage range: DC3 - 25V (FOR Arduino work on 5V) or DC3 - 16.5V (for Arduino work on 3.3V)
  • Test Current range: DC 0 - 3A

Arduino Current Sensor | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das Arduino Current Sensor-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • Arduino Current Sensor bei Amazon
  • Arduino Current Sensor bei Ebay
Arduino Current Sensor ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete Arduino Current Sensor wählen.

Arduino Current Sensor | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so Arduino Current Sensor noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

WYPH Mini Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board USB Cable for Arduino (Pre-soldered Nano 3pcs)
  • The header pins has been soldered for this package and it comes with 3pcs USB Cables.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
WYPH Mini Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board for Arduino Without USB Cable (Not-soldered Nano 3pcs)
  • The header pins haven't been soldered for this package and it comes without usb cable.
  • It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the Arduino software (IDE). It has everything that Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
  • It is a smallest, complete, and breadboard friendly board and 100% compatible with the official Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
  • It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
  • This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
1kg 5kg 10kg 20kg Load Cell and HX711 Combo Pack Kit - Load cell amplifier ADC weight sensor for Arduino scale (10kg+HX711)
  • Load cell:Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measures forces from 0-5kg/ 5kg /10kg /20kg.
  • HX711 :This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller (like an Arduino or Raspberry Pi).
  • Load cell specs: 22 cm (8.5 in) wire leads pre-attached. Dimensions 12.7 mm high, 12.7 mm wide, 80 mm long (0.5 in x 0.5 in x 3.15 in). 4 mounting holes, 15 mm spacing on each side. One both holes tapped M4 thread, the other side both holes tapped M5 thread.
  • HX711 specs: Operation Voltage: 2.7V-5V ; Operation Current: < 1.5mA ; Selectable 10SPS or 80SPS output data rate ; Includes breakaway headers for connection, soldering required.
  • Please choose the correct specification before buying. (A total of four specifications).Please refer to the picture on the left of this page for the product wiring diagram.
TMD27713 ALS infrared LED Optical Proximity Detection Module Face Proximity Detection Module Distance Lighting Sensor Module for Arduino
  • Module Name: Face Proximity Detection Module , Distance Illumination Sensor Module.
  • Module chip: TMD27713. Detection distance 100mm.
  • Ambient light + proximity sensor + infrared LED triple sensor TMD2771X used in mobile phones mainly serves two functions:
  • One function is used to detect the current ambient light brightness (ALS); and the software adjusts the backlight brightness automatically according to the current ambient light brightness conditions to adapt to the ambient brightness; the backlight brightness is soft to protect the eyesight Achieve the effect of saving electricity .
  • Another function, we call the Proximity Sensing function (PROX) uses the internal LED to emit infrared reflections and sensor built-in PD to determine whether the phone is close to the human face during the call, to determine the backlight status and touch-screen button status is ON /OFF.
01 02 015 Submersible Level Sensor,4-20mA Throw-In Type Liquid Level Sensor For Detecting 0-5m Range Depth 24V DC Input Liquid Level Transmitter for Detecting 0-5m Range Liquid Level
  • This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology.
  • The level transmitter receives different pressures at different depths of liquid, which can be converted into corresponding current signals and output through the sensor. In this way, the depth of liquid can be measured.
  • The shell of the transmitter is made of stainless steel, anti-corrosion and easy to clean. It can be directly placed in the liquid like water, oil or even mash with large viscosity. This product can provide a steady performance in all sorts of measurement conditions such as river, reservoir, city water supply, groundwater in urban, and basin.
  • Recommended purchase it : Analog Current to Voltage Converter. The converter can convert current into voltage signal which can be read by your Arduino controllers or other controllers. The throw-in type liquid level transmitter can be used in waterworks, refinery, sewage disposal work, construction, light industry, mechanical and so on.
  • Any technical issues after purchase please contact with our tech-support team.
Elektor AVR Playground Bundle
  • Microcontrollers
  • Arduino.
  • AVR
  • Projects
2 x Max471 Voltage Current Sensor Votage Sensor Current Sensor Module for Arduino Current Voltage Tester 5V DC 3-25V 0-3A Board
  • This module can be used to test the current and voltage.
  • The principle of voltage test based on principle of resistive voltage divider design
  • The MAX471 chip on the board used to test the consume current of the load.
  • Test Voltage range: DC3 - 25V (FOR Arduino work on 5V) or DC3 - 16.5V (for Arduino work on 3.3V)
  • Test Current range: DC 0 - 3A

Arduino Current Sensor | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu Arduino Current Sensor finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 4.11 of 5 - 9 votes
1 Star2 Stars3 Stars4 Stars5 Stars (9 votes, average: 4,11 out of 5)
Loading...

Best Deals

Ir Transmitter Arduino | Top Gutscheine & Rabatte


Arduino Esp8266 | Top Gutscheine & Rabatte


Cnc Shield Arduino | Top Gutscheine & Rabatte