Arduino Load Cell | Top Gutscheine & Rabatte

Latest Arduino Load Cell
Innovateking-EU Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module 5KG Portable Electronic Kitchen Scale for Arduino Scale
  • HX711 module uses 24 high precision A/D converter chip hx711; HX711 a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
  • LOAD CELL - Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-5kg (0-11 lb).
  • On-chip active low noise PGA with selectable gain of 32, 64 and 128.
  • On-chip power supply regulator for load-cell and ADC analog power supply, on-chip oscillator requiring no external component with optional external crystal.
  • Simple digital control and serial interface: pin-driven controls, no programming needed, selectable 10SPS or 80SPS output data rate.
Latest Arduino Load Cell
4pcs Load Cell 50kg Weight Sensor Half-bridge Human Body Scale Strain Gauge +1pcs HX711 Amplifier AD Weighing Module for Arduino DIYmalls
  • The input circuit can be configured to provide a bridge type pressure bridge (such as pressureweighing sensor mode)is of high precisionlow cost is an ideal sampling front-end module.
  • This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales
  • The sensor is a group of half-bridge strain gauge, there are 3 ways to use it. Please check description.
  • This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
  • If you have any problem, please contact seller as follow: click "DIYmaker"(you can find "Sold by DIYmaker" under Buy Now button), in the new page, click "Ask a question".
Latest Arduino Load Cell
YOUMILE 4pcs DIY 110lbs 50KG Half-bridge Body Load Cell Weight Strain Sensor Resistance + HX711 AD Module
  • Internal 1000 Ohm half-bridge strain gauge load cell, range is 50kg, half-bridge structure.
  • 1, using a sensor with external resistors full bridge measurement range of a sensor range: 50kg. Higher requirements for external resistor
  • 2, the use of only two full-bridge sensors measuring range is the range of the two sensors and: 50kgx2 = 100kg
  • 3, the use of four full-bridge sensors measuring range is the range of four sensors and: 50kgx4 = 200kg
  • Package Included: 4x 50kg Human Scale Load Cell 1x HX711 AD weighing module 1x 10Pin Needle
Latest Arduino Load Cell
Stemedu Load Cell 5KG Amplifier HX711 24 Bit Precision A/D Module Pressure Weighing Sensor, Portable Kitchen Scale Digital Weight Sensor AD Module for Arduino Raspberry Pi
  • Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711
  • Works for arduino and raspberry pi
  • HX711 module uses 24 high precision A/D converter chip hx711; HX711 a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
  • Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
  • Simple digital control and serial interface: pin-driven controls, no programming needed
Latest Arduino Load Cell
HX711 ADC Converter Breakout Module with 5KG Load Cell Weight Sensor/Pressure Sensor Portable Electronic Kitchen Scale
  • 1.HX711 module uses 24digit high precision A/D converter chip HX711, specially designed for high precision digital scale.
  • 2.With two analog input channel, the A/D converter module is internally integrated with 128 times programmable gain amplifier.
  • 3.On- chip active low noise PGA with selectable gain of 3264 and 128.
  • 4.On- chip power supply regulator for load-cell and ADC analog power supply .
  • 5.On- chip oscillator requiring no external component with optional external crystal .
DISCOUNTLatest Arduino Load Cell
Load Cell 10KG Amplifier HX711 Breakout, Digital Portable Kitchen Scale Weight Sensor AD Module Weighing for Arduino Raspberry Pi, DIYmall
  • Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711
  • This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. Works for arduino and raspberry pi
  • We have 300g 1kg 2kg 3kg 5kg 10kg 20kg 100kg
  • Package Includes: 1pcs load cell 10KG and 1pcs HX711 sensor
  • How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us
Latest Arduino Load Cell
Load Cell 10kg Weight Sensor Electronic Kitchen Scale + HX711 Amplifier AD Weighing Module for Arduino Raspberry Pi DIYmalls
  • The module uses 24 high-precision A / D converter chip hx711, is designed for high-precision electronic scale and design, with two analog input channels, the internal programmable gain amplifier integrated multiplier 128.
  • The input circuit can be configured to provide a bridge voltage electrical bridge (such as pressure, weight) sensor model is an ideal high-precision, low-cost sampling front-end module
  • Two selectable differential input channels
  • You need to connect load cell wtih HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
  • If you have any problem, please contact seller as follow: click "DIYmaker"(you can find "Sold by DIYmaker" under Buy Now button), in the new page, click "Ask a question".
DISCOUNTLatest Arduino Load Cell
Load Cell 100KG Amplifier HX711 Breakout, Digital Portable Kitchen Scale Weight Sensor AD Module Weighing for Arduino Raspberry Pi, DIYmall
  • Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide https://github.com/aguegu/ardulibs/tree/master/hx711
  • Works for arduino and raspberry pi, we have 300g 1kg 2kg 3kg 5kg 10kg 20kg 100kg
  • On-chip active low noise PGA with selectable gain of 3264 and 128
  • Package Includes: 1pcs load cell 100KG and 1pcs HX711 sensor
  • How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us
Latest Arduino Load Cell
Stemedu Load Cell 2KG Weighting Amplifier HX711 AD Breakout Board, Portable Kitchen Digital Scale Weight Sensor Module for Arduino Raspberry Pi, DIY maker
  • Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711
  • This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.
  • Works for arduino and raspberry pi
  • What you will get: 1PCS 2KG weighting sensor, 1 pcs HX711 AD Module
  • How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us

Arduino Load Cell | Bewertung

Auf dieser Seite finden Sie die Liste der besten Arduino Load Cell mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

Arduino Load Cell | Details und aktive Angebote

Hier ist die Tabelle der besten Arduino Load Cell. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

Arduino Load Cell Cheap
Zunate Load Cell,0-100g Parallel Beam Electronic Load Cell Scale Weighting Sensor High Precision,High quality aluminum alloy structure, sturdy and stable, long serving life.
  • High quality aluminum alloy structure, sturdy and stable, long serving life.
  • High accuracy, small comprehensive error, stable and durable performance.
  • Anti-fatigue, anti-bias load, can withstand the pull and pressure work.
  • Compact size and light wight, easy to install.
  • Applicable to 3C digital, electronics, security equipment, household appliances, smart home, measuring instruments, automotive electronics, network communications and other fields.
Arduino Load Cell Cheap
ILS - 3 pieces 5S Lithium Battery 21V 18V Protection Board Li-ion Lithium Battery Cell
  • Safe and Trackable Shipping
  • For more information or product specifications, read the description below
Arduino Load Cell Cheap
Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module 5KG Portable Electronic Kitchen Scale for Arduino Scale
  • HX711 module uses 24 high precision A/D converter chip hx711; HX711 a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
  • LOAD CELL - Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-5kg (0-11 lb).
  • On-chip active low noise PGA with selectable gain of 32, 64 and 128.
  • On-chip power supply regulator for load-cell and ADC analog power supply, on-chip oscillator requiring no external component with optional external crystal.
  • Simple digital control and serial interface: pin-driven controls, no programming needed, selectable 10SPS or 80SPS output data rate.
Arduino Load Cell Cheap
Un known 1A USB 5V to 9V DC Step Up Converter Cable for Arduinos/Wireless Router Accessory Manual Replacement Of Parts
  • It is USB to DC jack cable which contains DC-DC step-up power module and it outputs fixed 9V. It is particularly suitable for wireless router, Arduinos DIY, breadboard power supply and other projects.
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Arduino Load Cell Cheap
Un known 4.5~6V 2 Chips DC Motor Drive Module with LED Indication For Arduinos Accessory Manual Replacement Of Parts
  • L9110 is a two-channel push-pull type power amplifier ASIC device, designed to control and drive motor.
  • With dual chips TTL / CMOS compatible with input electrical level. Good anti-interference performance.
  • Convert the discrete circuit into a single IC, reduce costs of peripheric devices and more reliable.
  • L9110 is widely application to toy car motors, pulse electromagnetic valve drive, stepper motor drive and switching power tube circuit etc.
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Arduino Load Cell Cheap
Un known For Arduinos 2 Channel 5V Relay Shield Module ARM PIC AVR DSP Accessory Replacement of Accessories
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Arduino Load Cell Cheap
ILS - 5 pieces 5S Lithium Battery 21V 18V Protection Board Li-ion Lithium Battery Cell
  • Safe and Trackable Shipping
  • For more information or product specifications, read the description below
Arduino Load Cell Cheap
Un known DRV8871 H-Bridge Brushed DC Motor Driver Breakout Board For Arduino PWM Control 3.6A Max Internal Current Sense MOSFET Module Accessory Manual Replacement Of Parts
  • The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
  • Two logic inputs control the H- bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
  • Setting both inputs low enters a low-power sleep mode.
  • The inputs can be pulse- width modulated (PWM) to control motor speed, using a choice of current-decay modes.
  • The DRV8871 device has advanced current- regulation circuitry that does not use an analog voltage reference or external sense resistor.
Arduino Load Cell Cheap
Un known DRV8871 H-Bridge Brushed DC Motor Driver Breakout Board For Arduino PWM Control 3.6A Max Internal Current Sense MOSFET Module Accessory Replace Parts By Yourself
  • The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
  • Two logic inputs control the H- bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
  • Setting both inputs low enters a low-power sleep mode.
  • The inputs can be pulse- width modulated (PWM) to control motor speed, using a choice of current-decay modes.
  • The DRV8871 device has advanced current- regulation circuitry that does not use an analog voltage reference or external sense resistor.
Arduino Load Cell Cheap
Nologo CKQ-KQ Load Cell Sensor, Circular S-TYPE High-Precision Beam Load Cell Scale Weighting Sensor Electronic Weighing Devices Module for Weight Precision Measuring(5000kg)
  • ​100% brand new and high quality.
  • ​Oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments.
  • ​Circular S beam design. Precise and stable. Easy installation.
  • ​Suitable for mixing station, batching machine, asphalt station, etc.
  • ​Safe and anti-explosive product, can be used in bad environment and hazardous areas.

Arduino Load Cell | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits Arduino Load Cell gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von Arduino Load Cell veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten Arduino Load Cell-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

Arduino Load Cell | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel Arduino Load Cell kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt Arduino Load Cell

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und Arduino Load Cell könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

Arduino Load Cell | Günstige Produkte

Nachfolgend haben wir eine Reihe von Arduino Load Cell ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige Arduino Load Cell zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

DISCOUNTBest
Load Cell 10KG Amplifier HX711 Breakout, Digital Portable Kitchen Scale Weight Sensor AD Module Weighing for Arduino Raspberry Pi, DIYmall
  • Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711
  • This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. Works for arduino and raspberry pi
  • We have 300g 1kg 2kg 3kg 5kg 10kg 20kg 100kg
  • Package Includes: 1pcs load cell 10KG and 1pcs HX711 sensor
  • How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us
DISCOUNTBest
Load Cell 100KG Amplifier HX711 Breakout, Digital Portable Kitchen Scale Weight Sensor AD Module Weighing for Arduino Raspberry Pi, DIYmall
  • Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide https://github.com/aguegu/ardulibs/tree/master/hx711
  • Works for arduino and raspberry pi, we have 300g 1kg 2kg 3kg 5kg 10kg 20kg 100kg
  • On-chip active low noise PGA with selectable gain of 3264 and 128
  • Package Includes: 1pcs load cell 100KG and 1pcs HX711 sensor
  • How to email us? Please click “Stemedu” (you can find Sold by Stemedu under Buy Now button), in the new page, click “Ask a question” to email us
Best
Innovateking-EU Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module 5KG Portable Electronic Kitchen Scale for Arduino Scale
  • HX711 module uses 24 high precision A/D converter chip hx711; HX711 a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
  • LOAD CELL - Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-5kg (0-11 lb).
  • On-chip active low noise PGA with selectable gain of 32, 64 and 128.
  • On-chip power supply regulator for load-cell and ADC analog power supply, on-chip oscillator requiring no external component with optional external crystal.
  • Simple digital control and serial interface: pin-driven controls, no programming needed, selectable 10SPS or 80SPS output data rate.
Best
YOUMILE 4pcs DIY 110lbs 50KG Half-bridge Body Load Cell Weight Strain Sensor Resistance + HX711 AD Module
  • Internal 1000 Ohm half-bridge strain gauge load cell, range is 50kg, half-bridge structure.
  • 1, using a sensor with external resistors full bridge measurement range of a sensor range: 50kg. Higher requirements for external resistor
  • 2, the use of only two full-bridge sensors measuring range is the range of the two sensors and: 50kgx2 = 100kg
  • 3, the use of four full-bridge sensors measuring range is the range of four sensors and: 50kgx4 = 200kg
  • Package Included: 4x 50kg Human Scale Load Cell 1x HX711 AD weighing module 1x 10Pin Needle
Best
Weight Sensor 20kg Load Cell Electronic Kitchen Scale + HX711 Amplifier AD Weighing Module for Arduino Raspberry Pi DIYmalls
  • This HX711 module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.
  • You need to connect load cell wtih HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-
  • On-chip active low noise PGA with selectable gain of 3264 and 128
  • Simple digital control and serial interface: pin-driven controlsno programming needed
  • If you have any problem, please contact seller as follow: click "DIYmaker"(you can find "Sold by DIYmaker" under Buy Now button), in the new page, click "Ask a question".
Best
4pcs Load Cell 50kg Weight Sensor Half-bridge Human Body Scale Strain Gauge +1pcs HX711 Amplifier AD Weighing Module for Arduino DIYmalls
  • The input circuit can be configured to provide a bridge type pressure bridge (such as pressureweighing sensor mode)is of high precisionlow cost is an ideal sampling front-end module.
  • This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales
  • The sensor is a group of half-bridge strain gauge, there are 3 ways to use it. Please check description.
  • This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale
  • If you have any problem, please contact seller as follow: click "DIYmaker"(you can find "Sold by DIYmaker" under Buy Now button), in the new page, click "Ask a question".
Best
Stemedu Load Cell 5KG Amplifier HX711 24 Bit Precision A/D Module Pressure Weighing Sensor, Portable Kitchen Scale Digital Weight Sensor AD Module for Arduino Raspberry Pi
  • Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ or https://github.com/aguegu/ardulibs/tree/master/hx711
  • Works for arduino and raspberry pi
  • HX711 module uses 24 high precision A/D converter chip hx711; HX711 a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
  • Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
  • Simple digital control and serial interface: pin-driven controls, no programming needed

Arduino Load Cell | Katalog

Sie können Arduino Load Cell im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. Arduino Load Cell ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

Arduino Load Cell | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man Arduino Load Cell kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von Arduino Load Cell. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können Arduino Load Cell direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

ILS - 3 pieces 5S Lithium Battery 21V 18V Protection Board Li-ion Lithium Battery Cell
  • Safe and Trackable Shipping
  • For more information or product specifications, read the description below
Un known For Arduinos 2 Channel 5V Relay Shield Module ARM PIC AVR DSP Accessory Replacement of Accessories
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Un known DRV8871 H-Bridge Brushed DC Motor Driver Breakout Board For Arduino PWM Control 3.6A Max Internal Current Sense MOSFET Module Accessory Manual Replacement Of Parts
  • The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
  • Two logic inputs control the H- bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
  • Setting both inputs low enters a low-power sleep mode.
  • The inputs can be pulse- width modulated (PWM) to control motor speed, using a choice of current-decay modes.
  • The DRV8871 device has advanced current- regulation circuitry that does not use an analog voltage reference or external sense resistor.
Un known 1A USB 5V to 9V DC Step Up Converter Cable for Arduinos/Wireless Router Accessory Manual Replacement Of Parts
  • It is USB to DC jack cable which contains DC-DC step-up power module and it outputs fixed 9V. It is particularly suitable for wireless router, Arduinos DIY, breadboard power supply and other projects.
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Un known 4.5~6V 2 Chips DC Motor Drive Module with LED Indication For Arduinos Accessory Manual Replacement Of Parts
  • L9110 is a two-channel push-pull type power amplifier ASIC device, designed to control and drive motor.
  • With dual chips TTL / CMOS compatible with input electrical level. Good anti-interference performance.
  • Convert the discrete circuit into a single IC, reduce costs of peripheric devices and more reliable.
  • L9110 is widely application to toy car motors, pulse electromagnetic valve drive, stepper motor drive and switching power tube circuit etc.
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Un known DRV8871 H-Bridge Brushed DC Motor Driver Breakout Board For Arduino PWM Control 3.6A Max Internal Current Sense MOSFET Module Accessory Replace Parts By Yourself
  • The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
  • Two logic inputs control the H- bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
  • Setting both inputs low enters a low-power sleep mode.
  • The inputs can be pulse- width modulated (PWM) to control motor speed, using a choice of current-decay modes.
  • The DRV8871 device has advanced current- regulation circuitry that does not use an analog voltage reference or external sense resistor.
Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module 5KG Portable Electronic Kitchen Scale for Arduino Scale
  • HX711 module uses 24 high precision A/D converter chip hx711; HX711 a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
  • LOAD CELL - Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-5kg (0-11 lb).
  • On-chip active low noise PGA with selectable gain of 32, 64 and 128.
  • On-chip power supply regulator for load-cell and ADC analog power supply, on-chip oscillator requiring no external component with optional external crystal.
  • Simple digital control and serial interface: pin-driven controls, no programming needed, selectable 10SPS or 80SPS output data rate.

Arduino Load Cell | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das Arduino Load Cell-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • Arduino Load Cell bei Amazon
  • Arduino Load Cell bei Ebay
Arduino Load Cell ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete Arduino Load Cell wählen.

Arduino Load Cell | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so Arduino Load Cell noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

ILS - 3 pieces 5S Lithium Battery 21V 18V Protection Board Li-ion Lithium Battery Cell
  • Safe and Trackable Shipping
  • For more information or product specifications, read the description below
Un known For Arduinos 2 Channel 5V Relay Shield Module ARM PIC AVR DSP Accessory Replacement of Accessories
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Un known DRV8871 H-Bridge Brushed DC Motor Driver Breakout Board For Arduino PWM Control 3.6A Max Internal Current Sense MOSFET Module Accessory Manual Replacement Of Parts
  • The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
  • Two logic inputs control the H- bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
  • Setting both inputs low enters a low-power sleep mode.
  • The inputs can be pulse- width modulated (PWM) to control motor speed, using a choice of current-decay modes.
  • The DRV8871 device has advanced current- regulation circuitry that does not use an analog voltage reference or external sense resistor.
Un known 1A USB 5V to 9V DC Step Up Converter Cable for Arduinos/Wireless Router Accessory Manual Replacement Of Parts
  • It is USB to DC jack cable which contains DC-DC step-up power module and it outputs fixed 9V. It is particularly suitable for wireless router, Arduinos DIY, breadboard power supply and other projects.
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Un known 4.5~6V 2 Chips DC Motor Drive Module with LED Indication For Arduinos Accessory Manual Replacement Of Parts
  • L9110 is a two-channel push-pull type power amplifier ASIC device, designed to control and drive motor.
  • With dual chips TTL / CMOS compatible with input electrical level. Good anti-interference performance.
  • Convert the discrete circuit into a single IC, reduce costs of peripheric devices and more reliable.
  • L9110 is widely application to toy car motors, pulse electromagnetic valve drive, stepper motor drive and switching power tube circuit etc.
  • Please select the accessories suitable for your mobile phone according to the product title and picture.
Un known DRV8871 H-Bridge Brushed DC Motor Driver Breakout Board For Arduino PWM Control 3.6A Max Internal Current Sense MOSFET Module Accessory Replace Parts By Yourself
  • The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
  • Two logic inputs control the H- bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
  • Setting both inputs low enters a low-power sleep mode.
  • The inputs can be pulse- width modulated (PWM) to control motor speed, using a choice of current-decay modes.
  • The DRV8871 device has advanced current- regulation circuitry that does not use an analog voltage reference or external sense resistor.
Digital Load Cell Weight Sensor HX711 AD Converter Breakout Module 5KG Portable Electronic Kitchen Scale for Arduino Scale
  • HX711 module uses 24 high precision A/D converter chip hx711; HX711 a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
  • LOAD CELL - Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-5kg (0-11 lb).
  • On-chip active low noise PGA with selectable gain of 32, 64 and 128.
  • On-chip power supply regulator for load-cell and ADC analog power supply, on-chip oscillator requiring no external component with optional external crystal.
  • Simple digital control and serial interface: pin-driven controls, no programming needed, selectable 10SPS or 80SPS output data rate.

Arduino Load Cell | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu Arduino Load Cell finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 3.83 of 5 - 6 votes
1 Star2 Stars3 Stars4 Stars5 Stars (6 votes, average: 3,83 out of 5)
Loading...

Best Deals

Ir Transmitter Arduino | Top Gutscheine & Rabatte


Arduino Esp8266 | Top Gutscheine & Rabatte


Cnc Shield Arduino | Top Gutscheine & Rabatte