Arduino Motor Shield | Top Gutscheine & Rabatte

Latest Arduino Motor Shield
diymore L298P Shield Expansion Board DC Motor Driver Module 2A H-Bridge 2 way For Arduino UNO R3 Mega2560
  • The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors
  • It lets you drive two DC motors with your board, controlling the speed and direction of each one independently
  • You can also measure the motor current absorption of each motor, among other features
  • Motor controller L298P, Drives 2 DC motors or 1 stepper motor
  • Max current 2A per channel or 4A max (with external power supply)
Latest Arduino Motor Shield
Arduino Motor Shield Rev3
  • The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
  • It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently.
  • You can also measure the current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.
Latest Arduino Motor Shield
Lysignal L293D Motor Control Shield Motor Drive Expansion Board for Arduinos MEGA/UNO Diecimila & Duemilanove Robot Car Motor Control Shield
  • Monolithic integrated, high voltage, high current, 4-channel driver. Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts.
  • L293D chips are also known as type H Bridges. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
  • Up to 4 bidirectional DC motors and 4 way PWM speed regulation (about 0.5% resolution); Up to two stepper motors are in forward and reverse control, single / double step control, staggered or microstepping and rotation angle control.
  • 4 way H-bridge. L293D chip provides 0.6A (peak 1.2A) current per way, and has thermal power off protection, can run motors on 4.5V to 36V. Pull-down resistors keep motors disabled during power-up.
  • With Arduin reset button; 2 external terminal power interface, for separating logic/motor supplies. Tested compatible for Mega, Diecimila & Duemilanove.
Latest Arduino Motor Shield
ANGEEK L293D Motor Driver Shield Stepper Motor Driver for Arduino Duemilanove Mega UNO R3 AVR ATMEL
  • L293D is a monolithic 4-channel high voltage high-current monolithic driver
  • Basically, this means that with this chip you can use DC motors and power supplies up to 12 volts
  • The H bridge is typically an electrical circuit that allows a voltage to be applied to an output in each direction, such as motor.
  • These are some pretty large motors and the chip can deliver a maximum current of 600mA per channel, the L293D chip is also what is known as a kind of H bridge.
  • Can drive 4 DC motors or 2 stepper motors or 2 servos.
Latest Arduino Motor Shield
Youmile L298P Motor Driver Module High-power L298P PWM Speed Controller H-bridge Driver Shield Expansion Board DC Stepper Motor Controller Bluetooth Interface For Arduino
  • 【L298P Chip】Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A.
  • 【High-speed Schottky diodes】Use eight high-speed Schottky diodes at motor output as protection.
  • 【Stack design】 can be directly plugged into the Arduino, easier to use.
  • 【Performance】The L298P shield DC motor driver has PWM speed control mode; Dual high-power H-bridge driver.
  • 【Input】Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input.
Latest Arduino Motor Shield
AZDelivery L293D 4-channel Stepper Motor Driver Shield for Arduino Mega 2560 and UNO R3 / Diecimila/Duemilanove including E-Book!
  • 2 connections for 5V servo motors with connection to the Arduino Timer for smooth control.
  • For controlling 4 DC motors, 2 stepper motors or 2 servo motors.
  • 2 connections for external power supply, separate for logic and motor supply.
  • Dimensions: 70x55mm
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Latest Arduino Motor Shield
Elegoo 5 sets 28BYJ-48 5V Stepper Motor + ULN2003 Motor Driver Board for Arduino
  • Stepper motor with a standard interface could be connected with Driver Board easily
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking
  • Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
  • Great packing in a box : 5 set ULN2003 Stepper Motor + Driver Board (with a little gift) and you can download the datasheets in our website: https://www.elegoo.com/download/
Latest Arduino Motor Shield
AZDelivery CNC Shield V3.0 Expansion Board Bundle, 4PCS A4988 Stepper Motor Drivers with 4PCS Heatsink Kits for 3D Printer & Arduino Including E-Book!
  • AZ-Delivery CNC Shield V3 Development Board Bundle for 3D Printer and Arduino UNO R3 consists of CNC shield version 3.0 for Arduino and Set of 4 A4988 Stepper Motor Drivers.
  • AZ-Delivery CNC Shield V3 Development Board for A4988 Stepper Motor Driver for 3D Printer and Arduino UNO R3 has 4 Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13).
  • A4988 DMOS Stepper Motor Drivers are ideal for stepper motors with phase current of 2A (e.g., the NEMA17 motors for 3D printers).
  • Input voltage of the AZ-Delivery CNC Shield V3.0 is: 12 V - 36 V.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Latest Arduino Motor Shield
DaoRier Monster Moto Shield VNH2SP30 Stepper Motor Driver Module High Current 30A for Arduino
  • Voltage max: 16V; Maximum current rating: 30 A; Practical Continuous Current: 14 A
  • Current sensing available analog pin.
  • MOSFET on-resistance: 19 mΩ (per leg).
  • Maximum PWM frequency: 20 kHz
  • Undervoltage and Overvoltage shutdown; Thermal Shutdown
Latest Arduino Motor Shield
KINGPRINT CNC Shield V3.0 Expansion Board for Arduino with 4pcs A4988 Stepper Motor Driver with Heatsink kits for Arduino
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13), 2 x End stops for each axis (6 in total)
  • Latest Arduino CNC Shield Version 3.0, GRBL 0.9 compatible.
  • Uses removable A4988 or DRV8825 compatible stepper drivers.
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection.
  • Runs on 12-36V DC.

Arduino Motor Shield | Bewertung

Auf dieser Seite finden Sie die Liste der besten Arduino Motor Shield mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

Arduino Motor Shield | Details und aktive Angebote

Hier ist die Tabelle der besten Arduino Motor Shield. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

Arduino Motor Shield Cheap
Arduino Motor Shield Cheap
Reland Sun 1pcs L293D L293 Motor Driver Shield L293D motor control shield motor drive expansion board motor shield
  • L293D is a monolithic 4-channel high voltage high-current monolithic driver
  • Basically, this means that with this chip you can use DC motors and power supplies up to 12 volts
  • The H bridge is typically an electrical circuit that allows a voltage to be applied to an output in each direction, such as motor.
  • These are some pretty large motors and the chip can deliver a maximum current of 600mA per channel, the L293D chip is also what is known as a kind of H bridge.
  • Can drive 4 DC motors or 2 stepper motors or 2 servos.
Arduino Motor Shield Cheap
1PCS Monster Moto Shield VNH2SP30 stepper motor driver module high current 30A
  • This is essentially a ramped up version of Ardumoto motor driver shield.
  • For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
  • This board is capable of driving a pair of high-current motors!
  • he VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.
Arduino Motor Shield Cheap
ZkeeShop 2PCS PCA9685 16 Channel 12-Bit PWM Servo Motor Driver Compatible for Arduino Robot Raspberry Pi IIC Interface Module Servo Shield
  • It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
  • 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs
  • Output enable pin to quickly disable all the outputs
  • Adjustable frequency PWM up to about 1.6 KHz.Configurable push-pull or open-drain output
  • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
Arduino Motor Shield Cheap
Atmega16U2 Board Module with USB LLD Beaglebone Adapter CAPE for Arduino ANGEEK L293D Motor Driver
  • 1. Faster transfer rate and more memory.
  • 2. Fully compatible with the official version, high quality and easy to use. No driver is required on the system.
  • 3. These are some very large motors, the chip can provide a large current per channel
  • 4. Easy connection with many other devices.
  • 5. Link these devices in a simple and trouble-free way.
Arduino Motor Shield Cheap
3CTOP UNO R3 ATMEGA328P ATMEGA16U2 Development Board Compatible with Arduino
  • FASTER TRANSFER RATES - The gotor Uno R3 is a microcontroller board based on the ATmega328 chip from MicroChip. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and better at storage and operation with more memory
  • Dimension: 68mm x 53mm. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz crystal oscillator, a USB Type B connection, a DC Power Jack, an ICSP header, and a reset button
  • EASY TO USE - It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable (not included) or power it with an AC-to-DC adapter (you'll need one with a standard 5.5mm DC Barrel Jack connection) or battery to get started
  • COMPATIBILITY - 100% compatible with the official version the software found on the Arduino website. The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). No Drivers needed on Mac and Linux systems (inf file for Windows is needed and included in the Arduino IDE)
  • WHAT CAN WE USE IT? - Download the program simple and convenient. You can simply use the sensor, a variety of electronic components connected such as: LED lights, buzzers, buttons, photoresistors, robot car and so on with UNO R3 board to make all kinds of interesting works by programming
Arduino Motor Shield Cheap
Atmega16U2 Board Module with USB LLD Accessory Shield,Accessory Shield for Arduino Development, Several Accessories IN One Board ANGEEK L293D Motor Driver
  • 1. Faster transfer rate and more memory.
  • 2. Fully compatible with the official version, high quality and easy to use. No driver is required on the system.
  • 3. These are some very large motors, the chip can provide a large current per channel
  • 4. Easy connection with many other devices.
  • 5. Link these devices in a simple and trouble-free way.
Arduino Motor Shield Cheap
gnd 2PCS L298P Motor Driver Module H-bridge Drive Shield Expansion Board High-Power DC Stepper Motor Controller
  • VD:5V.VS:VIN import:6.5-12V,PWRIN 4.8-35V
  • Lss<36mA,lo<2A
  • Stack design can be directly plugged into the Arduino, easier to use
  • Suit to PWM / PLL mode motor speed control
  • Size:68*53mm
Arduino Motor Shield Cheap
Atmega16U2 Board Module with USB LLD 3.5 inch Touch LCD Shield for Arduino ANGEEK L293D Motor Driver
  • 1. Faster transfer rate and more memory.
  • 2. Fully compatible with the official version, high quality and easy to use. No driver is required on the system.
  • 3. These are some very large motors, the chip can provide a large current per channel
  • 4. Easy connection with many other devices.
  • 5. Link these devices in a simple and trouble-free way.
Arduino Motor Shield Cheap
Atmega16U2 Board Module with USB LLD 4 inch Touch LCD Shield for Arduino ANGEEK L293D Motor Driver
  • 1. Faster transfer rate and more memory.
  • 2. Fully compatible with the official version, high quality and easy to use. No driver is required on the system.
  • 3. These are some very large motors, the chip can provide a large current per channel
  • 4. Easy connection with many other devices.
  • 5. Link these devices in a simple and trouble-free way.

Arduino Motor Shield | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits Arduino Motor Shield gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von Arduino Motor Shield veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten Arduino Motor Shield-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

Arduino Motor Shield | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel Arduino Motor Shield kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt Arduino Motor Shield

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und Arduino Motor Shield könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

Arduino Motor Shield | Günstige Produkte

Nachfolgend haben wir eine Reihe von Arduino Motor Shield ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige Arduino Motor Shield zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

Best
diymore L298P Shield Expansion Board DC Motor Driver Module 2A H-Bridge 2 way For Arduino UNO R3 Mega2560
  • The Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors
  • It lets you drive two DC motors with your board, controlling the speed and direction of each one independently
  • You can also measure the motor current absorption of each motor, among other features
  • Motor controller L298P, Drives 2 DC motors or 1 stepper motor
  • Max current 2A per channel or 4A max (with external power supply)
Best
Arduino Motor Shield Rev3
  • The Arduino Motor Shield is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
  • It lets you drive two DC motors with your Arduino board, controlling the speed and direction of each one independently.
  • You can also measure the current absorption of each motor, among other features. The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.
Best
Lysignal L293D Motor Control Shield Motor Drive Expansion Board for Arduinos MEGA/UNO Diecimila & Duemilanove Robot Car Motor Control Shield
  • Monolithic integrated, high voltage, high current, 4-channel driver. Basically this means using this chip you can use DC motors and power supplies of up to 36 Volts.
  • L293D chips are also known as type H Bridges. The H-Bridge is typically an electrical circuit that enables a voltage to be applied across a load in either direction to an output, e.g. motor.
  • Up to 4 bidirectional DC motors and 4 way PWM speed regulation (about 0.5% resolution); Up to two stepper motors are in forward and reverse control, single / double step control, staggered or microstepping and rotation angle control.
  • 4 way H-bridge. L293D chip provides 0.6A (peak 1.2A) current per way, and has thermal power off protection, can run motors on 4.5V to 36V. Pull-down resistors keep motors disabled during power-up.
  • With Arduin reset button; 2 external terminal power interface, for separating logic/motor supplies. Tested compatible for Mega, Diecimila & Duemilanove.
Best
ANGEEK L293D Motor Driver Shield Stepper Motor Driver for Arduino Duemilanove Mega UNO R3 AVR ATMEL
  • L293D is a monolithic 4-channel high voltage high-current monolithic driver
  • Basically, this means that with this chip you can use DC motors and power supplies up to 12 volts
  • The H bridge is typically an electrical circuit that allows a voltage to be applied to an output in each direction, such as motor.
  • These are some pretty large motors and the chip can deliver a maximum current of 600mA per channel, the L293D chip is also what is known as a kind of H bridge.
  • Can drive 4 DC motors or 2 stepper motors or 2 servos.
Best
Elegoo 5 sets 28BYJ-48 5V Stepper Motor + ULN2003 Motor Driver Board for Arduino
  • Stepper motor with a standard interface could be connected with Driver Board easily
  • A, B, C, D four-phase LED indicates the status of the stepper motor work.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board,With convenient use, direct docking
  • Drive Module Board Size(in): 1.37*1.18*0.6 ; Stepper Motor diameter: 1.06(in) ; Stepper Motor lines: 9.45(in)
  • Great packing in a box : 5 set ULN2003 Stepper Motor + Driver Board (with a little gift) and you can download the datasheets in our website: https://www.elegoo.com/download/
Best
AZDelivery L293D 4-channel Stepper Motor Driver Shield for Arduino Mega 2560 and UNO R3 / Diecimila/Duemilanove including E-Book!
  • 2 connections for 5V servo motors with connection to the Arduino Timer for smooth control.
  • For controlling 4 DC motors, 2 stepper motors or 2 servo motors.
  • 2 connections for external power supply, separate for logic and motor supply.
  • Dimensions: 70x55mm
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Best
AZDelivery CNC Shield V3.0 Expansion Board Bundle, 4PCS A4988 Stepper Motor Drivers with 4PCS Heatsink Kits for 3D Printer & Arduino Including E-Book!
  • AZ-Delivery CNC Shield V3 Development Board Bundle for 3D Printer and Arduino UNO R3 consists of CNC shield version 3.0 for Arduino and Set of 4 A4988 Stepper Motor Drivers.
  • AZ-Delivery CNC Shield V3 Development Board for A4988 Stepper Motor Driver for 3D Printer and Arduino UNO R3 has 4 Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13).
  • A4988 DMOS Stepper Motor Drivers are ideal for stepper motors with phase current of 2A (e.g., the NEMA17 motors for 3D printers).
  • Input voltage of the AZ-Delivery CNC Shield V3.0 is: 12 V - 36 V.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.

Arduino Motor Shield | Katalog

Sie können Arduino Motor Shield im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. Arduino Motor Shield ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

Arduino Motor Shield | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man Arduino Motor Shield kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von Arduino Motor Shield. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können Arduino Motor Shield direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

3CTOP UNO R3 ATMEGA328P ATMEGA16U2 Development Board Compatible with Arduino
  • FASTER TRANSFER RATES - The gotor Uno R3 is a microcontroller board based on the ATmega328 chip from MicroChip. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and better at storage and operation with more memory
  • Dimension: 68mm x 53mm. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz crystal oscillator, a USB Type B connection, a DC Power Jack, an ICSP header, and a reset button
  • EASY TO USE - It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable (not included) or power it with an AC-to-DC adapter (you'll need one with a standard 5.5mm DC Barrel Jack connection) or battery to get started
  • COMPATIBILITY - 100% compatible with the official version the software found on the Arduino website. The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). No Drivers needed on Mac and Linux systems (inf file for Windows is needed and included in the Arduino IDE)
  • WHAT CAN WE USE IT? - Download the program simple and convenient. You can simply use the sensor, a variety of electronic components connected such as: LED lights, buzzers, buttons, photoresistors, robot car and so on with UNO R3 board to make all kinds of interesting works by programming
gnd 2PCS L298P Motor Driver Module H-bridge Drive Shield Expansion Board High-Power DC Stepper Motor Controller
  • VD:5V.VS:VIN import:6.5-12V,PWRIN 4.8-35V
  • Lss<36mA,lo<2A
  • Stack design can be directly plugged into the Arduino, easier to use
  • Suit to PWM / PLL mode motor speed control
  • Size:68*53mm
Reland Sun 1pcs L293D L293 Motor Driver Shield L293D motor control shield motor drive expansion board motor shield
  • L293D is a monolithic 4-channel high voltage high-current monolithic driver
  • Basically, this means that with this chip you can use DC motors and power supplies up to 12 volts
  • The H bridge is typically an electrical circuit that allows a voltage to be applied to an output in each direction, such as motor.
  • These are some pretty large motors and the chip can deliver a maximum current of 600mA per channel, the L293D chip is also what is known as a kind of H bridge.
  • Can drive 4 DC motors or 2 stepper motors or 2 servos.
1PCS Monster Moto Shield VNH2SP30 stepper motor driver module high current 30A
  • This is essentially a ramped up version of Ardumoto motor driver shield.
  • For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
  • This board is capable of driving a pair of high-current motors!
  • he VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.
ZkeeShop 2PCS PCA9685 16 Channel 12-Bit PWM Servo Motor Driver Compatible for Arduino Robot Raspberry Pi IIC Interface Module Servo Shield
  • It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
  • 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs
  • Output enable pin to quickly disable all the outputs
  • Adjustable frequency PWM up to about 1.6 KHz.Configurable push-pull or open-drain output
  • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
Atmega16U2 Board Module with USB LLD Accessory Shield,Accessory Shield for Arduino Development, Several Accessories IN One Board ANGEEK L293D Motor Driver
  • 1. Faster transfer rate and more memory.
  • 2. Fully compatible with the official version, high quality and easy to use. No driver is required on the system.
  • 3. These are some very large motors, the chip can provide a large current per channel
  • 4. Easy connection with many other devices.
  • 5. Link these devices in a simple and trouble-free way.

Arduino Motor Shield | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das Arduino Motor Shield-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • Arduino Motor Shield bei Amazon
  • Arduino Motor Shield bei Ebay
Arduino Motor Shield ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete Arduino Motor Shield wählen.

Arduino Motor Shield | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so Arduino Motor Shield noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

3CTOP UNO R3 ATMEGA328P ATMEGA16U2 Development Board Compatible with Arduino
  • FASTER TRANSFER RATES - The gotor Uno R3 is a microcontroller board based on the ATmega328 chip from MicroChip. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and better at storage and operation with more memory
  • Dimension: 68mm x 53mm. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analogue inputs, a 16 MHz crystal oscillator, a USB Type B connection, a DC Power Jack, an ICSP header, and a reset button
  • EASY TO USE - It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable (not included) or power it with an AC-to-DC adapter (you'll need one with a standard 5.5mm DC Barrel Jack connection) or battery to get started
  • COMPATIBILITY - 100% compatible with the official version the software found on the Arduino website. The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux). No Drivers needed on Mac and Linux systems (inf file for Windows is needed and included in the Arduino IDE)
  • WHAT CAN WE USE IT? - Download the program simple and convenient. You can simply use the sensor, a variety of electronic components connected such as: LED lights, buzzers, buttons, photoresistors, robot car and so on with UNO R3 board to make all kinds of interesting works by programming
gnd 2PCS L298P Motor Driver Module H-bridge Drive Shield Expansion Board High-Power DC Stepper Motor Controller
  • VD:5V.VS:VIN import:6.5-12V,PWRIN 4.8-35V
  • Lss<36mA,lo<2A
  • Stack design can be directly plugged into the Arduino, easier to use
  • Suit to PWM / PLL mode motor speed control
  • Size:68*53mm
Reland Sun 1pcs L293D L293 Motor Driver Shield L293D motor control shield motor drive expansion board motor shield
  • L293D is a monolithic 4-channel high voltage high-current monolithic driver
  • Basically, this means that with this chip you can use DC motors and power supplies up to 12 volts
  • The H bridge is typically an electrical circuit that allows a voltage to be applied to an output in each direction, such as motor.
  • These are some pretty large motors and the chip can deliver a maximum current of 600mA per channel, the L293D chip is also what is known as a kind of H bridge.
  • Can drive 4 DC motors or 2 stepper motors or 2 servos.
1PCS Monster Moto Shield VNH2SP30 stepper motor driver module high current 30A
  • This is essentially a ramped up version of Ardumoto motor driver shield.
  • For this monster shield we've replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers.
  • This board is capable of driving a pair of high-current motors!
  • he VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.
ZkeeShop 2PCS PCA9685 16 Channel 12-Bit PWM Servo Motor Driver Compatible for Arduino Robot Raspberry Pi IIC Interface Module Servo Shield
  • It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
  • 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs
  • Output enable pin to quickly disable all the outputs
  • Adjustable frequency PWM up to about 1.6 KHz.Configurable push-pull or open-drain output
  • 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
Atmega16U2 Board Module with USB LLD Accessory Shield,Accessory Shield for Arduino Development, Several Accessories IN One Board ANGEEK L293D Motor Driver
  • 1. Faster transfer rate and more memory.
  • 2. Fully compatible with the official version, high quality and easy to use. No driver is required on the system.
  • 3. These are some very large motors, the chip can provide a large current per channel
  • 4. Easy connection with many other devices.
  • 5. Link these devices in a simple and trouble-free way.

Arduino Motor Shield | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu Arduino Motor Shield finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 3.88 of 5 - 8 votes
1 Star2 Stars3 Stars4 Stars5 Stars (8 votes, average: 3,88 out of 5)
Loading...

Best Deals

Arduino Nano R3 | Top Gutscheine & Rabatte


Arduino Nano | Top Gutscheine & Rabatte


Arduino Esp8266 | Top Gutscheine & Rabatte