H Bridge Arduino | Top Gutscheine & Rabatte

Latest H Bridge Arduino
Neuftech L298n dual H-bridge DC stepper motor controller dirve module for Arduino Raspberry Pi
  • L298N as main driver chip makes strong driving ability,low heating,strong anti-interference
  • The module is drived by Dual-channel H-bridge,it can drive two motors simultaneously that creates higher working efficiency
  • The speed and direction can be easily controlled using arduino
  • Large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • This module can use built-in 78M05 for electric work via a driving power supply part
Latest H Bridge Arduino
JZK BTS7960B 43A High Power Double DC Stepper Motor Driver Module Board H-Bridge PWM for Smart Car Arduino
  • Double BTS7960 large current H bridge driver, limit up to 43A large current output, with a strong drive and brake effects
  • With the microcontroller 5V isolation, effective protection of single-chip; Using 74HC244 chip to effectively isolate the microcontroller and motor drive.
  • Can achieve the motor forward rotation and reversal rotation. Two PWM input up to 25kHZ frequency;
  • Overcurrent and overheating error signal output; Over temperature, overvoltage, undervoltage, overcurrent protection, short circuit protection
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; The supply voltage is 5.5V to 27V
Latest H Bridge Arduino
TIMESETL 5Pack L298N Dual H Bridge Stepper Motor Driver Controller Board Module for Arduino Pi Electric Projects
  • [High Quality L298N] Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects
  • [Size] External size 43*43*27mm / 1.69*1.69*1.06 inch, drive voltage 5V-35V, drive current 2A max per single bridge
  • [Higher Efficiency] Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient
  • [Easy to Use] No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use
  • [Caution] To avoid damage, if driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits
Latest H Bridge Arduino
5 Pack of L298N Module H Bridge Driver Board Module for Stepper Motor Smart Car Robot DC Stepper Motor Driver Controller Board
  • 100% Brand New and High Quality
  • Drived by Dual-channel H-bridge,it can drive two motors simultaneously that creates higher working efficiency
  • Strong driving ability, strong anti-interference, low calorific value
  • No assembly required. Just wire up motors and power, easy to use
  • Large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
Latest H Bridge Arduino
HALJIA 3Pcs DRV8833 1.5A 2 Channel H Bridge DC Gear Motor Driver Module Board Compatible with 3D Printer Arduino
  • The motor driver can control up to two DC motors at a constant current of 1.0A (4A peak).
  • Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
  • The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz.
  • Power supply voltage: VM = 2.7-10.8V
  • Output current: Iout=1.0A(average) / 4A (peak)
Latest H Bridge Arduino
DollaTek Mini Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC Stepper for Arduino Smart Car Robot
  • The module using ST L298N chipset,has strong driver capability,afterglow protection diode, more stable and reliable.
  • Logical voltage 5V. Drive voltage 5V-35V Drive current 2A(MAX single bridge). Max power 25W Storage temperature: -25 ~ +130
  • Size:43*43*27mm / 1.69*1.69*1.06"
  • Dual-channel H-bridge driver working mode creates higher working efficiency
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
Latest H Bridge Arduino
iHaospace 2 Pcs L298N Dual H Bridge DC Motor Driver Stepper Motor Driver Controller Module for Arduino Motor Drive Controller Board Module
  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, ST corporation production.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable
Latest H Bridge Arduino
HALJIA L298P Motor Driver Module H-bridge Drive Shield Expansion Board High-Power DC Stepper Motor Controller Compatible with Arduino
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A
  • Use eight high-speed Schottky diodes at motor output as protection
  • Stack design can be directly plugged into the Arduino, easier to use
  • Drive Type: Dual power H-bridge driver
  • Supports PWM / PLL mode motor speed control
Latest H Bridge Arduino
DollaTek L298P Motor Driver Module H-bridge Drive Shield Expansion Board High-Power DC Stepper Motor Controller For Arduino
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A
  • Use eight high-speed Schottky diodes at motor output as protection
  • Stack design can be directly plugged into the Arduino, easier to use
  • The L298P shield DC motor driver has PWM speed control mode; dual high-power H-bridge driver
  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input
Latest H Bridge Arduino
Neuftech 2 Pcs L298N Motor Driver Module Dual Channel H Bridge DC Stepper Driver Module Controller for Arduino Raspberry Pi
  • L298N as main chip. Double H bridge driver
  • This motor driver has strong driving ability, low heating, strong anti-jamming ability
  • Large capacity filter capacitance,freewheeling protection diode, more stable and reliable
  • Logical voltage 5V. Drive voltage 5V-35V
  • Drive current 2A(MAX single bridge). Max power 25W

H Bridge Arduino | Bewertung

Auf dieser Seite finden Sie die Liste der besten H Bridge Arduino mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

H Bridge Arduino | Details und aktive Angebote

Hier ist die Tabelle der besten H Bridge Arduino. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

H Bridge Arduino Cheap
L298P Module Expansion Board Blue R3 Motor Driver Module Expansion Board for Arduino UNO 2560 Durable Holiday Gifts
  • Max current 2A per channel or 4A max (with external power supply).
  • Motor drive voltage: external input 3-35V; internal input: 6-12V
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.
  • Working status indicator lights are conducive for the safety use.
  • The motor shield is based on the L298, which is a dual full bridge driver designed to drive inductive loads such as relays, solenoids, DC, and stepper motors.
H Bridge Arduino Cheap
XD-37GB520 DC Gear Motor Miniature DC deceleration Motor Slow Speed Motor 10W Speed reversing Low Speed DC Brushed Motor Metal Gear 12/24(V) Electrical Tools
  • R3 driver board lets you drive two DC motors with your board, controlling the speed and direction of each one independently.
  • The R3 motor driver module is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
  • Maximum current of 2 A per channel or 4 A max. (with external power supply).
  • You can also measure the motor current absorption of each motor, among other features.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.
H Bridge Arduino Cheap
WSCHENG 1Pcs New Dual H Bridge Dc Stepper Motor Drive Controller Board Module L298N For Arduino
  • If you need 1pcs, 5pcs, 10pcs, or more, please contact me!
  • If you can't find the parts you want in my shop, please contact me!
  • You can contact me via aliexpress, Order Messages and Conversations.
  • You can also send me an email, and I will reply to you immediately!
  • Please feel free to contact us through TradeManager or E-mail.
H Bridge Arduino Cheap
WSCHENG 5pcs L9110S DC Stepper Motor Driver Board H-bridge L9110 Stepper Motor Dual DC Motor Module Driver Controller Board For Arduino
  • 1. Low static work current
  • 2. Power supply voltage: DC2.5-12V
  • 3. Each channel has 800mA continuous current output
  • 4. Low saturation pressure drop
  • 5. TTL/CMOS output level compatible, can be connected directly to the CPU
H Bridge Arduino Cheap
WSCHENG 43A High Power Motor Driver Module/Smart Car Driver Module For Arduino Current Limit High-power Drive Full H-bridge Driver 1 Pcs
  • Input voltage: 6V-27V
  • Maximum current: 43A
  • Input level: 3.3-5V
  • Control method: PWM or level
  • Duty cycle: 0-100%
H Bridge Arduino Cheap
WSCHENG 1pc New 3A 75W DC PWM Speed Adjustable Motor Driver Module LMD18200T For-arduino
  • LMD18200T DC Motor Driver Module is an H-bridge driver component dedicated to the DC motor.
  • Integrated CMOS control circuitry, and DMOS power device on the same chip, the use of which may constitute a complete motion control system with the main processor, motors and incremental encoders.
  • LMD18200 widely used in printers, robots With power indicator, and speed is adjustable.
  • Anti-jamming with a continuous flow protection.
H Bridge Arduino Cheap
WSCHENG 5 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control And Drives Module For Arduino Smart Car
  • Colour:red
  • Material:ABS
  • This module can use built-in 78M05 for electric work via a driving power supply part.
  • This module is integrated with a built-in 5V power.When the drive voltage is 7V-35V, it can enable the onboard 5V logic power supply;afterthe power supply,don't input voltage in the interface+5V power supply,but you can lead the 5V for external use.
H Bridge Arduino Cheap
WSCHENG H-Bridge DC Dual Motor Driver PWM Module DC 3~36V 15A Peak 30A IRF3205 High Power Control Board For Arduino Robot Smart Car (Voltage : 36V)
  • Material:Plastic + Metal
  • Colour:Green
  • Dimensions: 100 x 70 x 21mm
  • net weight:2.01 oz
  • Motor being transferred: DIR = 1 PWM = PWM
H Bridge Arduino Cheap
Onior 2x 3D Printer LCD Panel Board Switch RAMPS-FD Converter for Adruino DUE Circuit board
  • The Ramps-FD LCD Adapter is an LCD adapter designed for use with FOR Arduino DUE and Ramps-FD 3D printed boards.
  • As the FOR Arduino DUE master chip pin operating voltage of 3.3V, while the LCD display the working voltage of 5V, so the design of the adapter circuit has introduced a signal amplification chip, making the DUE board can be very good Drive and isolate the LCD display.
  • Is currently on the market a good DUE + Ramps-FD 3D printed composite motherboard display adapter board.
  • Support 2004 screen display.
  • 2x LCD Panel Adapter

H Bridge Arduino | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits H Bridge Arduino gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von H Bridge Arduino veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten H Bridge Arduino-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

H Bridge Arduino | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel H Bridge Arduino kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt H Bridge Arduino

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und H Bridge Arduino könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

H Bridge Arduino | Günstige Produkte

Nachfolgend haben wir eine Reihe von H Bridge Arduino ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige H Bridge Arduino zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

Best
Neuftech L298n dual H-bridge DC stepper motor controller dirve module for Arduino Raspberry Pi
  • L298N as main driver chip makes strong driving ability,low heating,strong anti-interference
  • The module is drived by Dual-channel H-bridge,it can drive two motors simultaneously that creates higher working efficiency
  • The speed and direction can be easily controlled using arduino
  • Large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • This module can use built-in 78M05 for electric work via a driving power supply part
Best
JZK BTS7960B 43A High Power Double DC Stepper Motor Driver Module Board H-Bridge PWM for Smart Car Arduino
  • Double BTS7960 large current H bridge driver, limit up to 43A large current output, with a strong drive and brake effects
  • With the microcontroller 5V isolation, effective protection of single-chip; Using 74HC244 chip to effectively isolate the microcontroller and motor drive.
  • Can achieve the motor forward rotation and reversal rotation. Two PWM input up to 25kHZ frequency;
  • Overcurrent and overheating error signal output; Over temperature, overvoltage, undervoltage, overcurrent protection, short circuit protection
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; The supply voltage is 5.5V to 27V
Best
TIMESETL 5Pack L298N Dual H Bridge Stepper Motor Driver Controller Board Module for Arduino Pi Electric Projects
  • [High Quality L298N] Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects
  • [Size] External size 43*43*27mm / 1.69*1.69*1.06 inch, drive voltage 5V-35V, drive current 2A max per single bridge
  • [Higher Efficiency] Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient
  • [Easy to Use] No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use
  • [Caution] To avoid damage, if driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits
Best
5 Pack of L298N Module H Bridge Driver Board Module for Stepper Motor Smart Car Robot DC Stepper Motor Driver Controller Board
  • 100% Brand New and High Quality
  • Drived by Dual-channel H-bridge,it can drive two motors simultaneously that creates higher working efficiency
  • Strong driving ability, strong anti-interference, low calorific value
  • No assembly required. Just wire up motors and power, easy to use
  • Large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
Best
HALJIA 3Pcs DRV8833 1.5A 2 Channel H Bridge DC Gear Motor Driver Module Board Compatible with 3D Printer Arduino
  • The motor driver can control up to two DC motors at a constant current of 1.0A (4A peak).
  • Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop.
  • The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz.
  • Power supply voltage: VM = 2.7-10.8V
  • Output current: Iout=1.0A(average) / 4A (peak)
Best
iHaospace 2 Pcs L298N Dual H Bridge DC Motor Driver Stepper Motor Driver Controller Module for Arduino Motor Drive Controller Board Module
  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, ST corporation production.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability
  • High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w
  • Large capacity filter capacitance,afterflow protection diode, more stable and reliable
Best
DollaTek Mini Stepper Motor Drive Controller Board Module L298N Dual H Bridge DC Stepper for Arduino Smart Car Robot
  • The module using ST L298N chipset,has strong driver capability,afterglow protection diode, more stable and reliable.
  • Logical voltage 5V. Drive voltage 5V-35V Drive current 2A(MAX single bridge). Max power 25W Storage temperature: -25 ~ +130
  • Size:43*43*27mm / 1.69*1.69*1.06"
  • Dual-channel H-bridge driver working mode creates higher working efficiency
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage

H Bridge Arduino | Katalog

Sie können H Bridge Arduino im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. H Bridge Arduino ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

H Bridge Arduino | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man H Bridge Arduino kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von H Bridge Arduino. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können H Bridge Arduino direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

L298P Module Expansion Board Blue R3 Motor Driver Module Expansion Board for Arduino UNO 2560 Durable Holiday Gifts
  • Max current 2A per channel or 4A max (with external power supply).
  • Motor drive voltage: external input 3-35V; internal input: 6-12V
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.
  • Working status indicator lights are conducive for the safety use.
  • The motor shield is based on the L298, which is a dual full bridge driver designed to drive inductive loads such as relays, solenoids, DC, and stepper motors.
XD-37GB520 DC Gear Motor Miniature DC deceleration Motor Slow Speed Motor 10W Speed reversing Low Speed DC Brushed Motor Metal Gear 12/24(V) Electrical Tools
  • R3 driver board lets you drive two DC motors with your board, controlling the speed and direction of each one independently.
  • The R3 motor driver module is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
  • Maximum current of 2 A per channel or 4 A max. (with external power supply).
  • You can also measure the motor current absorption of each motor, among other features.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.
Onior 2x 3D Printer LCD Panel Board Switch RAMPS-FD Converter for Adruino DUE Circuit board
  • The Ramps-FD LCD Adapter is an LCD adapter designed for use with FOR Arduino DUE and Ramps-FD 3D printed boards.
  • As the FOR Arduino DUE master chip pin operating voltage of 3.3V, while the LCD display the working voltage of 5V, so the design of the adapter circuit has introduced a signal amplification chip, making the DUE board can be very good Drive and isolate the LCD display.
  • Is currently on the market a good DUE + Ramps-FD 3D printed composite motherboard display adapter board.
  • Support 2004 screen display.
  • 2x LCD Panel Adapter
WSCHENG 43A High Power Motor Driver Module/Smart Car Driver Module For Arduino Current Limit High-power Drive Full H-bridge Driver 1 Pcs
  • Input voltage: 6V-27V
  • Maximum current: 43A
  • Input level: 3.3-5V
  • Control method: PWM or level
  • Duty cycle: 0-100%
WSCHENG H-Bridge DC Dual Motor Driver PWM Module DC 3~36V 15A Peak 30A IRF3205 High Power Control Board For Arduino Robot Smart Car (Voltage : 36V)
  • Material:Plastic + Metal
  • Colour:Green
  • Dimensions: 100 x 70 x 21mm
  • net weight:2.01 oz
  • Motor being transferred: DIR = 1 PWM = PWM
WSCHENG 5pcs L9110S DC Stepper Motor Driver Board H-bridge L9110 Stepper Motor Dual DC Motor Module Driver Controller Board For Arduino
  • 1. Low static work current
  • 2. Power supply voltage: DC2.5-12V
  • 3. Each channel has 800mA continuous current output
  • 4. Low saturation pressure drop
  • 5. TTL/CMOS output level compatible, can be connected directly to the CPU
WSCHENG 1pc New 3A 75W DC PWM Speed Adjustable Motor Driver Module LMD18200T For-arduino
  • LMD18200T DC Motor Driver Module is an H-bridge driver component dedicated to the DC motor.
  • Integrated CMOS control circuitry, and DMOS power device on the same chip, the use of which may constitute a complete motion control system with the main processor, motors and incremental encoders.
  • LMD18200 widely used in printers, robots With power indicator, and speed is adjustable.
  • Anti-jamming with a continuous flow protection.

H Bridge Arduino | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das H Bridge Arduino-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • H Bridge Arduino bei Amazon
  • H Bridge Arduino bei Ebay
H Bridge Arduino ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete H Bridge Arduino wählen.

H Bridge Arduino | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so H Bridge Arduino noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

L298P Module Expansion Board Blue R3 Motor Driver Module Expansion Board for Arduino UNO 2560 Durable Holiday Gifts
  • Max current 2A per channel or 4A max (with external power supply).
  • Motor drive voltage: external input 3-35V; internal input: 6-12V
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.
  • Working status indicator lights are conducive for the safety use.
  • The motor shield is based on the L298, which is a dual full bridge driver designed to drive inductive loads such as relays, solenoids, DC, and stepper motors.
XD-37GB520 DC Gear Motor Miniature DC deceleration Motor Slow Speed Motor 10W Speed reversing Low Speed DC Brushed Motor Metal Gear 12/24(V) Electrical Tools
  • R3 driver board lets you drive two DC motors with your board, controlling the speed and direction of each one independently.
  • The R3 motor driver module is based on the L298, which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors.
  • Maximum current of 2 A per channel or 4 A max. (with external power supply).
  • You can also measure the motor current absorption of each motor, among other features.
  • Widely used for all MCU control, industrial sector, PLC control, smart home control.
Onior 2x 3D Printer LCD Panel Board Switch RAMPS-FD Converter for Adruino DUE Circuit board
  • The Ramps-FD LCD Adapter is an LCD adapter designed for use with FOR Arduino DUE and Ramps-FD 3D printed boards.
  • As the FOR Arduino DUE master chip pin operating voltage of 3.3V, while the LCD display the working voltage of 5V, so the design of the adapter circuit has introduced a signal amplification chip, making the DUE board can be very good Drive and isolate the LCD display.
  • Is currently on the market a good DUE + Ramps-FD 3D printed composite motherboard display adapter board.
  • Support 2004 screen display.
  • 2x LCD Panel Adapter
WSCHENG 43A High Power Motor Driver Module/Smart Car Driver Module For Arduino Current Limit High-power Drive Full H-bridge Driver 1 Pcs
  • Input voltage: 6V-27V
  • Maximum current: 43A
  • Input level: 3.3-5V
  • Control method: PWM or level
  • Duty cycle: 0-100%
WSCHENG H-Bridge DC Dual Motor Driver PWM Module DC 3~36V 15A Peak 30A IRF3205 High Power Control Board For Arduino Robot Smart Car (Voltage : 36V)
  • Material:Plastic + Metal
  • Colour:Green
  • Dimensions: 100 x 70 x 21mm
  • net weight:2.01 oz
  • Motor being transferred: DIR = 1 PWM = PWM
WSCHENG 5pcs L9110S DC Stepper Motor Driver Board H-bridge L9110 Stepper Motor Dual DC Motor Module Driver Controller Board For Arduino
  • 1. Low static work current
  • 2. Power supply voltage: DC2.5-12V
  • 3. Each channel has 800mA continuous current output
  • 4. Low saturation pressure drop
  • 5. TTL/CMOS output level compatible, can be connected directly to the CPU
WSCHENG 1pc New 3A 75W DC PWM Speed Adjustable Motor Driver Module LMD18200T For-arduino
  • LMD18200T DC Motor Driver Module is an H-bridge driver component dedicated to the DC motor.
  • Integrated CMOS control circuitry, and DMOS power device on the same chip, the use of which may constitute a complete motion control system with the main processor, motors and incremental encoders.
  • LMD18200 widely used in printers, robots With power indicator, and speed is adjustable.
  • Anti-jamming with a continuous flow protection.

H Bridge Arduino | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu H Bridge Arduino finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 3.64 of 5 - 14 votes
1 Star2 Stars3 Stars4 Stars5 Stars (14 votes, average: 3,64 out of 5)
Loading...

Best Deals

Arduino Esp8266 | Top Gutscheine & Rabatte


Arduino Board | Top Gutscheine & Rabatte


Arduino Nano R3 | Top Gutscheine & Rabatte