Nrf24l01 Raspberry Pi | Top Gutscheine & Rabatte

DISCOUNTLatest Nrf24l01 Raspberry Pi
TECNOIOT 2pcs NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Microcontroller | 2pcs NRF24L01 2.4GHz Wireless Module for Arduino, ESP8266, Raspberry Pi, etc.
  • 【Modules NRF24L01】 NRF24L01 is a chip-only radio transceiver for ISM band of 2.4 -2.5 GHz worldwide. Using these NRF24L01 modules, radio transmission can be established between two Arduinos or other Microcontrollers.Easy connection of the radio modules to the Arduino through the SPI protocol
  • 【Applications】 wireless peripherals, remote control systems, such as RC vehicles and remote consumer electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation.
  • 【Small shape】 15x29mm (including: built-in 2.4 GHz antenna), which performs the design without additional hardware.The function of self-recognizing and self-retransmitting
  • 【Easy operation】 You can easily find several resources available online, such as tutorials, data sheets and notes
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT
Latest Nrf24l01 Raspberry Pi
Toyvian Wireless Transceiver NRF24L01+ 2.4GHz Raspberry Pi Compatible(15PCS)
  • Pls note: "NRF24L01+" is a model type, doesn't mean "+" anything.
  • Arduino and Raspberry Pi compatible.
  • 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs.
  • Built-in hardware CRC error detection, Multipoint communication address control.
  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
Latest Nrf24l01 Raspberry Pi
NRF24L01+ 2.4GHz PA+LNA SMA 1Km Wireless RF Transceiver for Arduino Raspberry Pi
  • Supports up to 6 channels of data sending and receiving
  • Operating voltage from only 1.9 to 3.6 V
  • Maximum energy consumption: 115mA
  • Up to 2Mbps transfer rate (2Mbps/1Mbps/250Kbps)
  • SPI interface for microcontrollers such as Arduino Raspberry Pi
Latest Nrf24l01 Raspberry Pi
DIY Part Wireless Shield Board for Raspberry Pi Support Zigbee-Xbee NRF24L01 NRF24L01+RFM12B-D Raspberry Pi
  • - Easy to assemble
  • - Easy to configure
  • - Smaller and portable
  • - No Soldering Required
Latest Nrf24l01 Raspberry Pi
Qiyue Bao Zhuang Accessories DIY Part Wireless Shield Board for Raspberry Pi Support Zigbee-Xbee NRF24L01 NRF24L01+RFM12B-D Accessories
  • We provide a 100% warranty on our products, and if there is any problem, we will be happy to provide you with a product replacement.
  • - Easy to assemble
  • - Easy to configure
  • - Smaller and portable
  • - No Soldering Required
Latest Nrf24l01 Raspberry Pi
Retransmit Table DIY Part Wireless Shield Board for Raspberry Pi Support Zigbee-Xbee NRF24L01 NRF24L01+RFM12B-D On the Expansion Card
  • - Easy to assemble
  • - Easy to configure
  • - Smaller and portable
  • - No Soldering Required
  • Because manual measurements, please allow a difference of 0.1 to 0.5 inches. (1 inch = 2.54 cm)
Latest Nrf24l01 Raspberry Pi
TECNOIOT 5pcs NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Microcontroller | 5pcs NRF24L01 2.4GHz Wireless Module for Arduino, ESP8266, Raspberry Pi, etc.
  • 【Modules NRF24L01】 NRF24L01 is a chip-only radio transceiver for ISM band of 2.4 -2.5 GHz worldwide. Using these NRF24L01 modules, radio transmission can be established between two Arduinos or other Microcontrollers.Easy connection of the radio modules to the Arduino through the SPI protocol
  • 【Applications】 wireless peripherals, remote control systems, such as RC vehicles and remote consumer electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation.
  • 【Small shape】 15x29mm (including: built-in 2.4 GHz antenna), which performs the design without additional hardware The function of self-recognizing and self-retransmitting
  • 【Easy operation】 You can easily find several resources available online, such as tutorials, data sheets and notes
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT
Latest Nrf24l01 Raspberry Pi
DIY Part Wireless Shield Board for Raspberry Pi Support Zigbee-Xbee NRF24L01 NRF24L01+RFM12B-D Memory Modules
  • High conversion rate, high efficiency output. Made of high quality materials, environmentally friendly, slightly waterproof, durable and sensitive.
  • - Easy to assemble
  • - Easy to configure
  • - Smaller and portable
  • - No Soldering Required
Latest Nrf24l01 Raspberry Pi
YJIA DIY Part Wireless Shield Board For Raspberry Pi Support Zigbee-Xbee NRF24L01 NRF24L01+RFM12B-D Woodworking Tools
  • - No Soldering Required
  • - Easy to configure
  • - Smaller and portable
  • - Easy to assemble
Latest Nrf24l01 Raspberry Pi
Youmile 5Pcs Wireless Transceiver Module NRF24L01 2.4GHz Antenna Wireless Transmission + NRF24L01 Adapter 8 Pin Socket Breakout for Arduino Raspberry Pi with DuPont Cable
  • On-board AMS1117-3.3 chip.
  • NRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band.
  • Output power, frequency channels, and protocol setup are easily.
  • Built-in Power Down and Standby modes makes power saving easily realizable.
  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control.

Nrf24l01 Raspberry Pi | Bewertung

Auf dieser Seite finden Sie die Liste der besten Nrf24l01 Raspberry Pi mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

Nrf24l01 Raspberry Pi | Details und aktive Angebote

Hier ist die Tabelle der besten Nrf24l01 Raspberry Pi. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

Nrf24l01 Raspberry Pi Cheap
GAESHOW CE009 USB Power Supply Module 5V to 3.3V DC-DC Step-Down Converter Module Step-Down Module
  • 100% brand new and high quality
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Application: for raspberry pi/banana pi/esp8266, for MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
Nrf24l01 Raspberry Pi Cheap
BUIDI Mini DC-DC 0.9-5V to DC 5V Step-up Boost Voltage Converter Module For Arduino Electronic component
  • Simple and efficient, practical.
  • Simple and efficient, practical.
  • High precision and stability.
  • Each value is clearly marked
  • Good quality and low price, high cost performance
  • Good and excellent practisiing accessories and parts for training skills.
Nrf24l01 Raspberry Pi Cheap
Step-Down Module, Brand New DC-DC Step-Down Module, USB Interface CE009, 3 Functions for Wireless Communication Equipment Industry Equipment Office
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • 100% brand new and high quality
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
Nrf24l01 Raspberry Pi Cheap
USB Interface Application DC-DC Step-Down Module, 3 Functions Step-Down Module, Brand New for Equipment Wireless Communication Equipment
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • 100% brand new and high quality
Nrf24l01 Raspberry Pi Cheap
Brand New DC-DC Step-Down Module, Step-Down Module, 3 Functions USB Interface for Wireless Communication Equipment Industry Office Equipment
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • 100% brand new and high quality
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • USB interface Multifunction DC/DC 5V to 3.3V Module
Nrf24l01 Raspberry Pi Cheap
USB Interface Brand New Step-Down Module, CE009, DC-DC Step-Down Module, High Quality Industry for Wireless Communication Equipment Office Equipment
  • Application: for raspberry pi/banana pi/esp8266, for MEGA2560 DUE, for AVR Atmel PIC STM32 C8051 MSP430
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • 100% brand new and high quality
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • USB interface Multifunction DC/DC 5V to 3.3V Module
Nrf24l01 Raspberry Pi Cheap
Buck Converter, 3 Functions Converter Module, Industry Office for Wireless Communication Equipment Equipment
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • Application: for raspberry pi/banana pi/esp8266, for MEGA2560 DUE, for AVR Atmel PIC STM32 C8051 MSP430
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • 100% brand new and high quality
Nrf24l01 Raspberry Pi Cheap
ROSEBEAR CE009 USB Power Supply Module 5V to 3.3V DC-DC Step Down Module Buck Converter Module
  • USB interface Multifunction DC/DC 5V to 3.3V Buck Module.
  • 100% brand new and high quality.
  • Input DC 4.5-7V(USB input OR 2.54 Pin input).
  • 3 functions : USB to 3.3V;USB to 5V(5V to 5V);5V to 3.3V.
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR Atmel PIC STM32 C8051 MSP430 Zigbee CC2530, Wireless module : Nrf24l01 Nrf24lE1 CC1101 CC2500 SI4432 SI4463, for FPGA/CPLD:Altera EPM240/EPM570/EP4CE6; Xilinx XC2C64A,Wireless communication equipment.
Nrf24l01 Raspberry Pi Cheap
GeeekPi Raspberry Pi Expansion Board 4 Channel Relay Board Module Power Relay Module for Raspberry Pi 3/2 B & Raspberry Pi 3 Model B+ & Raspberry Pi 4 Model B(No programming required/Programmable)
  • 4 Channel Relay Hat Board For Raspberry Pi is one of the "docker pi" module.Up to four layers can be stacked.It has 4 channel relay that you can put it on your smart home project. It also uses high-quality relay modules combined with the most popular microcontroller technology to communicate with the Raspberry Pi.
  • Switch the I2C address of the device through the DIP switch on the circuit board to ensure that the four-layer module gets different addresses, thus avoiding the problem of address duplication.
  • The relay module is very fast, easy to install, and supports multi-language development, making it ideal for smart home projects. It supports multiple modules stacked together for use.It can be accessed programmatically or directly by shell.
  • WIKI:https://wiki.52pi.com/index.php/4_Channel_Relay_Hat_Board_For_Raspberry_Pi_SKU:_EP-0099
  • Package includes: 1x 4 Channel Relay Hat Board, 4x M2.5x16 copper stick, 8x M2.5x12 screws, 1x Instructions
Nrf24l01 Raspberry Pi Cheap
Makerfire 4pcs NRF24L01+ Breakout Adapter with on-board 3.3V Regulator for NRF24L01+ Wireless Module
  • Pls note: "NRF24L01+" is a model type, doesn't mean "+" anything.
  • Arduino and Raspberry Pi compatible. Small power on SMD LED indicator.
  • Allows for easy connection to Arduino; "nRF24L01+" module may be purchased here: https://www.amazon.com/dp/B00O9O868G.
  • Small power on SMD LED indicator; On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached "nRF24L01+" module.
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!

Nrf24l01 Raspberry Pi | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits Nrf24l01 Raspberry Pi gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von Nrf24l01 Raspberry Pi veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten Nrf24l01 Raspberry Pi-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

Nrf24l01 Raspberry Pi | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel Nrf24l01 Raspberry Pi kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt Nrf24l01 Raspberry Pi

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und Nrf24l01 Raspberry Pi könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

Nrf24l01 Raspberry Pi | Günstige Produkte

Nachfolgend haben wir eine Reihe von Nrf24l01 Raspberry Pi ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige Nrf24l01 Raspberry Pi zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

Best
AZDelivery NRF24L01+ 8-Pin Breakout Adapter Board Wireless Transceiver Module 4.8V 12V AMS1117 2.4 GHz NRF24L01 Compatible With Arduino, Raspberry Pi
  • The AZDelivery NRF24L01 module is an adapter board/simple plug in strip for the NRF24L01 wireless module
  • The breakout adapter for the NRF24L01+ module enables comfortable working and reduces the need for cabling.
  • The adapter is equipped with an AMS1117 fixed voltage regulator and additional capacitors for stable operation.
  • Thanks to the wide voltage range of the AMS1117, the module can be operated with up to 12V with no issues.
  • Purchase comes with an automated invoice, VAT included according to British standards. AZ-Delivery, quality products and fast shipping directly from our UK warehouse.
Best
NRF24L01+ 2.4GHz PA+LNA SMA 1Km Wireless RF Transceiver for Arduino Raspberry Pi
  • Supports up to 6 channels of data sending and receiving
  • Operating voltage from only 1.9 to 3.6 V
  • Maximum energy consumption: 115mA
  • Up to 2Mbps transfer rate (2Mbps/1Mbps/250Kbps)
  • SPI interface for microcontrollers such as Arduino Raspberry Pi
Best
Qiyue Bao Zhuang Accessories DIY Part Wireless Shield Board for Raspberry Pi Support Zigbee-Xbee NRF24L01 NRF24L01+RFM12B-D Accessories
  • We provide a 100% warranty on our products, and if there is any problem, we will be happy to provide you with a product replacement.
  • - Easy to assemble
  • - Easy to configure
  • - Smaller and portable
  • - No Soldering Required
Best
Retransmit Table DIY Part Wireless Shield Board for Raspberry Pi Support Zigbee-Xbee NRF24L01 NRF24L01+RFM12B-D On the Expansion Card
  • - Easy to assemble
  • - Easy to configure
  • - Smaller and portable
  • - No Soldering Required
  • Because manual measurements, please allow a difference of 0.1 to 0.5 inches. (1 inch = 2.54 cm)
Best
SunFounder 2pcs nRF24L01+ 2.4GHz Wireless Transceiver for Arduino UNO R3 Mega2560 Nano, Raspberry Pi
  • Please download the document from this link: http://www.sunfounder.com/wiki/index.php?title=NRF24L01_Test_with_Arduino
  • Arduino and Raspberry Pi compatible
  • Several resources available online, such as tutorials, data sheets, and notes
  • Auto-acknowledge and auto-retransmit
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation
Best
AZDelivery NRF24L01+ 8-Pin Breakout Adapter Board Wireless Transceiver Module 4.8V 12V AMS1117 2.4 GHz NRF24L01 Compatible With Arduino, Raspberry Pi (Pack of 5)
  • Get a five-piece deal of the AZDelivery 8-Pin Breakout Adapter Board NRF24L01+ Module at a special quantity discount price.
  • The NRF24L01 module is an adapter board/simple plug in strip for the NRF24L01 wireless module. The breakout adapter for the NRF24L01+ module enables comfortable working and reduces the need for cabling.
  • The adapter is equipped with an AMS1117 fixed voltage regulator and additional capacitors for stable operation.
  • Thanks to the wide voltage range of the AMS1117, the module can be operated with up to 12V with no issues.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Best
TECNOIOT 5pcs NRF24L01 2.4GHz Wireless Transceiver Module For Arduino Microcontroller | 5pcs NRF24L01 2.4GHz Wireless Module for Arduino, ESP8266, Raspberry Pi, etc.
  • 【Modules NRF24L01】 NRF24L01 is a chip-only radio transceiver for ISM band of 2.4 -2.5 GHz worldwide. Using these NRF24L01 modules, radio transmission can be established between two Arduinos or other Microcontrollers.Easy connection of the radio modules to the Arduino through the SPI protocol
  • 【Applications】 wireless peripherals, remote control systems, such as RC vehicles and remote consumer electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation.
  • 【Small shape】 15x29mm (including: built-in 2.4 GHz antenna), which performs the design without additional hardware The function of self-recognizing and self-retransmitting
  • 【Easy operation】 You can easily find several resources available online, such as tutorials, data sheets and notes
  • 【Fast delivery】 Fast and high quality delivery of Spain buying in TECNOIOT

Nrf24l01 Raspberry Pi | Katalog

Sie können Nrf24l01 Raspberry Pi im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. Nrf24l01 Raspberry Pi ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

Nrf24l01 Raspberry Pi | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man Nrf24l01 Raspberry Pi kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von Nrf24l01 Raspberry Pi. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können Nrf24l01 Raspberry Pi direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

Makerfire 4pcs NRF24L01+ Breakout Adapter with on-board 3.3V Regulator for NRF24L01+ Wireless Module
  • Pls note: "NRF24L01+" is a model type, doesn't mean "+" anything.
  • Arduino and Raspberry Pi compatible. Small power on SMD LED indicator.
  • Allows for easy connection to Arduino; "nRF24L01+" module may be purchased here: https://www.amazon.com/dp/B00O9O868G.
  • Small power on SMD LED indicator; On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached "nRF24L01+" module.
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
ROSEBEAR CE009 USB Power Supply Module 5V to 3.3V DC-DC Step Down Module Buck Converter Module
  • USB interface Multifunction DC/DC 5V to 3.3V Buck Module.
  • 100% brand new and high quality.
  • Input DC 4.5-7V(USB input OR 2.54 Pin input).
  • 3 functions : USB to 3.3V;USB to 5V(5V to 5V);5V to 3.3V.
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR Atmel PIC STM32 C8051 MSP430 Zigbee CC2530, Wireless module : Nrf24l01 Nrf24lE1 CC1101 CC2500 SI4432 SI4463, for FPGA/CPLD:Altera EPM240/EPM570/EP4CE6; Xilinx XC2C64A,Wireless communication equipment.
BUIDI Mini DC-DC 0.9-5V to DC 5V Step-up Boost Voltage Converter Module For Arduino Electronic component
  • Simple and efficient, practical.
  • Simple and efficient, practical.
  • High precision and stability.
  • Each value is clearly marked
  • Good quality and low price, high cost performance
  • Good and excellent practisiing accessories and parts for training skills.
GeeekPi Raspberry Pi Expansion Board 4 Channel Relay Board Module Power Relay Module for Raspberry Pi 3/2 B & Raspberry Pi 3 Model B+ & Raspberry Pi 4 Model B(No programming required/Programmable)
  • 4 Channel Relay Hat Board For Raspberry Pi is one of the "docker pi" module.Up to four layers can be stacked.It has 4 channel relay that you can put it on your smart home project. It also uses high-quality relay modules combined with the most popular microcontroller technology to communicate with the Raspberry Pi.
  • Switch the I2C address of the device through the DIP switch on the circuit board to ensure that the four-layer module gets different addresses, thus avoiding the problem of address duplication.
  • The relay module is very fast, easy to install, and supports multi-language development, making it ideal for smart home projects. It supports multiple modules stacked together for use.It can be accessed programmatically or directly by shell.
  • WIKI:https://wiki.52pi.com/index.php/4_Channel_Relay_Hat_Board_For_Raspberry_Pi_SKU:_EP-0099
  • Package includes: 1x 4 Channel Relay Hat Board, 4x M2.5x16 copper stick, 8x M2.5x12 screws, 1x Instructions
GAESHOW CE009 USB Power Supply Module 5V to 3.3V DC-DC Step-Down Converter Module Step-Down Module
  • 100% brand new and high quality
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Application: for raspberry pi/banana pi/esp8266, for MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
Step-Down Module, Brand New DC-DC Step-Down Module, USB Interface CE009, 3 Functions for Wireless Communication Equipment Industry Equipment Office
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • 100% brand new and high quality
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
USB Interface Application DC-DC Step-Down Module, 3 Functions Step-Down Module, Brand New for Equipment Wireless Communication Equipment
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • 100% brand new and high quality

Nrf24l01 Raspberry Pi | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das Nrf24l01 Raspberry Pi-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • Nrf24l01 Raspberry Pi bei Amazon
  • Nrf24l01 Raspberry Pi bei Ebay
Nrf24l01 Raspberry Pi ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete Nrf24l01 Raspberry Pi wählen.

Nrf24l01 Raspberry Pi | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so Nrf24l01 Raspberry Pi noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

Makerfire 4pcs NRF24L01+ Breakout Adapter with on-board 3.3V Regulator for NRF24L01+ Wireless Module
  • Pls note: "NRF24L01+" is a model type, doesn't mean "+" anything.
  • Arduino and Raspberry Pi compatible. Small power on SMD LED indicator.
  • Allows for easy connection to Arduino; "nRF24L01+" module may be purchased here: https://www.amazon.com/dp/B00O9O868G.
  • Small power on SMD LED indicator; On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached "nRF24L01+" module.
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
ROSEBEAR CE009 USB Power Supply Module 5V to 3.3V DC-DC Step Down Module Buck Converter Module
  • USB interface Multifunction DC/DC 5V to 3.3V Buck Module.
  • 100% brand new and high quality.
  • Input DC 4.5-7V(USB input OR 2.54 Pin input).
  • 3 functions : USB to 3.3V;USB to 5V(5V to 5V);5V to 3.3V.
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR Atmel PIC STM32 C8051 MSP430 Zigbee CC2530, Wireless module : Nrf24l01 Nrf24lE1 CC1101 CC2500 SI4432 SI4463, for FPGA/CPLD:Altera EPM240/EPM570/EP4CE6; Xilinx XC2C64A,Wireless communication equipment.
BUIDI Mini DC-DC 0.9-5V to DC 5V Step-up Boost Voltage Converter Module For Arduino Electronic component
  • Simple and efficient, practical.
  • Simple and efficient, practical.
  • High precision and stability.
  • Each value is clearly marked
  • Good quality and low price, high cost performance
  • Good and excellent practisiing accessories and parts for training skills.
GeeekPi Raspberry Pi Expansion Board 4 Channel Relay Board Module Power Relay Module for Raspberry Pi 3/2 B & Raspberry Pi 3 Model B+ & Raspberry Pi 4 Model B(No programming required/Programmable)
  • 4 Channel Relay Hat Board For Raspberry Pi is one of the "docker pi" module.Up to four layers can be stacked.It has 4 channel relay that you can put it on your smart home project. It also uses high-quality relay modules combined with the most popular microcontroller technology to communicate with the Raspberry Pi.
  • Switch the I2C address of the device through the DIP switch on the circuit board to ensure that the four-layer module gets different addresses, thus avoiding the problem of address duplication.
  • The relay module is very fast, easy to install, and supports multi-language development, making it ideal for smart home projects. It supports multiple modules stacked together for use.It can be accessed programmatically or directly by shell.
  • WIKI:https://wiki.52pi.com/index.php/4_Channel_Relay_Hat_Board_For_Raspberry_Pi_SKU:_EP-0099
  • Package includes: 1x 4 Channel Relay Hat Board, 4x M2.5x16 copper stick, 8x M2.5x12 screws, 1x Instructions
GAESHOW CE009 USB Power Supply Module 5V to 3.3V DC-DC Step-Down Converter Module Step-Down Module
  • 100% brand new and high quality
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Application: for raspberry pi/banana pi/esp8266, for MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
Step-Down Module, Brand New DC-DC Step-Down Module, USB Interface CE009, 3 Functions for Wireless Communication Equipment Industry Equipment Office
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • 100% brand new and high quality
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
USB Interface Application DC-DC Step-Down Module, 3 Functions Step-Down Module, Brand New for Equipment Wireless Communication Equipment
  • Output: 3.3 V,800 mA (load current can't more than 800 mA)
  • Input DC 4.5-7V(USB input OR 2.54 Pin input)
  • Application: for raspberry pi/banana pi/esp8266, for UNO MEGA2560 DUE, for AVR PIC STM32 C8051 MSP430
  • USB interface Multifunction DC/DC 5V to 3.3V Module
  • 100% brand new and high quality

Nrf24l01 Raspberry Pi | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu Nrf24l01 Raspberry Pi finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 3.8 of 5 - 5 votes
1 Star2 Stars3 Stars4 Stars5 Stars (5 votes, average: 3,80 out of 5)
Loading...

Best Deals

Car Kit Raspberry Pi | Top Gutscheine & Rabatte


Sense Hat Raspberry Pi | Top Gutscheine & Rabatte


Rab Raspberry Pi | Top Gutscheine & Rabatte