Sharp Sensor Arduino | Top Gutscheine & Rabatte

Latest Sharp Sensor Arduino
KingBra 1 Set for Sharp Dust sensor GP2Y1010 AU0F Optical Dust Sensor with Cable for Arduino EK1365 Board
  • GP2Y1010AU0F is a dust sensor by optical sensing system for such as cigarette smoke particles are very sensitive, so commonly used in air purification systems.
  • Infrared emitting diode and phototransistor pair Angle arranged in this device, it is possible to detect airborne dust in the reflected light.
  • The sensor current consumption is very low (maximum current of 20mA, typically 11mA), and can be started up to 7 volts DC.
  • Analog sensor output voltage is proportional to the density of dust with the standard, the sensitivity of 0.5V / 0.1mg / m3.
  • Size: 46mmx30mmx17.6mm Weight : 15g
Latest Sharp Sensor Arduino
Paradisetronic.com Sharp GP2Y0A02YK0F 20-150 cm Distance Sensor/Distance Meter with Connection Cable e.g. for Arduino
  • Ideal for your next robotic project: can be used for distance measurements, obstacle detection and much more.
  • Optical distance measurement: The distance measurement is contactless via infrared. Internal triangulation minimizes mismeasurements due to reflections and temperature fluctuations.
  • Easy to control by analogue output: an output voltage of 0.4 V corresponds to about a distance of 150 cm, a voltage of approx. 2.5v is about 20cm
  • Measuring range from 20 - 150 cm - also ideal for use as a proximity sensor.
  • Recommended operating voltage: 4.5-5.5V, current consumption: approx. 33 mA
Latest Sharp Sensor Arduino
pzsmocn IR Distance Sensor For Arduino 4" - 32"(10-80cm)/Sharp Distance Sensors,3-pin JST Connector,for robots ranging,Obstacle Avoidance and Advanced Path Planning.
  • operating voltage: 4.5 V to 5.5 V. average current consumption: 30 mA (typical).
  • Distance measuring range: 10 cm to 80 cm (4 to 32 ). output type: analog voltage. output voltage differential over distance range: 1.9 V (typical).
  • response time: 38 Plus/minus 10 ms. package size: 29.5*13.0*13.5 MM .
Latest Sharp Sensor Arduino
ULIAN Arduimo accessonries modules/sensors for Arduino Sharp GP2Y1010AU0F DIY PM2.5 Dust Sensor GP2Y1010F for Audino / Raspberry PI
  • Type:Sensor,
  • Use For:For Arduino,
  • Sensor Function:Temperature,
  • Accessories Function:Connector,
  • Dimension(cm):5x5x3,
Latest Sharp Sensor Arduino
ARCELI GP2Y0A21YK0F Sharp IR Analog Distance Sensor 10-80cm + Cable, Compatible
  • Distance Measuring Range: 10 cm to 80 cm (4in to 32in)
  • Output Type: Analog Voltage
  • Operating Voltage: 4.5 V to 5.5 V
  • Update Period: 38 ± 10 ms
  • Average Current Consumption: 30 mA (typical)
Latest Sharp Sensor Arduino
UIOTEC GP2Y0A21YK0F Sharp IR Analog Distance Sensor 10-80cm + Cable, for Arduino Compatible*
  • Distance Measuring Range: 10 cm to 80 cm (4in to 32in)
  • Output Type: Analog Voltage
  • Operating Voltage: 4.5 V to 5.5 V
  • Update Period: 38 ?à 10 ms
  • Average Current Consumption: 30 mA (typical)
Latest Sharp Sensor Arduino
Waveshare Dust Sensor Detector Module with Sharp GP2Y1010AU0F Onboard for Measuring PM2.5 Air Purifier Air Conditioner Monitor Supports Arduino
  • Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm in diameter, even like the cigarette smoke
  • Low power consumption, analog voltage output, the output level is linear with dust density
  • Embedded voltage boost circuit to support wide range of power supply;Sensitivity : 0.5V/(100μg/m3)
  • Applications:Air purifier;Air conditioner;Air monitor;PM2.5 Detector
  • Demo code offered
Latest Sharp Sensor Arduino
Air quality sensors transfer module,dust sensor (Applied to Air Quality, PM2.5 Monitoring,Air Filtering,Air Quality Station)
  • The Dust Sensor requires some wiring on the breadboard.
  • It can be applied to Air monitoring,Air filtering,Air quality station.
  • Integrated LED for power indicator.
  • On-board silkscreen: A is for analog pin, D is for digital pin
Latest Sharp Sensor Arduino
ELEGOO Ultrasonic Sensor, HC-SR04 Ultrasonic Distance Sensor Kits for Arduino UNO MEGA2560 Raspberry Pi,Datasheet Available to Download
  • Ultrasonic HC-SR04 Distance Measuring Transducer Sensor Compatible with Arduino
  • HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object. The distance between the unit and the object is calculated by measuring the traveling time of sound and output it as the width of a TTL pulse.
  • Power supply: 5V DC; quiescent current: less than 2mA; effectual angle: less than 15°; distance: 2cm~300cm; resolution: 0.3 cm
  • Package Content: 5pcs HC-SR04 with a gift of 10 pcs female to male dupont cable
  • You can download the datasheet from the link below: http://bit.ly/2jKlJMO

Sharp Sensor Arduino | Bewertung

Auf dieser Seite finden Sie die Liste der besten Sharp Sensor Arduino mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

Sharp Sensor Arduino | Details und aktive Angebote

Hier ist die Tabelle der besten Sharp Sensor Arduino. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

Sharp Sensor Arduino Cheap
AZDelivery IR Infrared Obstacle Avoidance Sensor Distance Detection Module for Arduino Raspberry Pi Smart Car Robot Including E-Book!
  • Suitable for Arduino, Raspberry Pi and other microcontrollers. IR Distance Sensor for Robot Cars
  • The module can be powered by a 3V - 5V DC power supply. When the power is turned on, the red power indicator lights up.
  • Stable operation using the comparator LM393
  • The sensor module light is adaptable to its environment.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Sharp Sensor Arduino Cheap
AZDelivery KY-037 High Sensitivity Sound Detection Big Microphone Module for Arduino including eBook
  • AZ-Delivery KY-037 High Sensitivity Sound Detection Microphone Big Module for Arduino is high sensitivity sound detection module, which has two output signal pins and one digital pin (D0).
  • KY-037 High Sensitivity Sound Detection Microphone Module Frequency Response range is: 50 Hz ~ 20 kHz.
  • Operating voltage of the AZ-Delivery KY-037 High Sensitivity Sound Detection Microphone Big Module for Arduino is: 3.3 V - 5 V.
  • For sound detection AZ-Delivery KY-037 High Sensitivity Sound Detection Microphone Big Module for Arduino has two outputs: AO and DO.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Sharp Sensor Arduino Cheap
AZDelivery KY-038 High Sensitivity Sound Detection Small Microphone Module Compatible with Arduino including eBook
  • AZ-Delivery KY-038 High Sensitivity Sound Detection Microphone Small Module for Arduino can detect sound and outputs, both as analog signal as well as digital, for example, when creating a clap on/clap off light switch. This sensor is very useful with the relay module.
  • AZ-Delivery KY-038 High Sensitivity Sound Detection Microphone Small Module for Arduino has two LED Indicatiors: POWER and SENSOR.
  • These KY-038 Microphone Modules are perfect for sound alarm system applications, are made of high quality material, and are durable to use.
  • For sound detection, AZ-Delivery KY-038 High Sensitivity Sound Detection Microphone Small Module for Arduino has two outputs: AO and DO.
  • Welcome to the AZ-Delivery family! For top quality microelectronics, we are your go to. We provide an array of application examples, full installation guides, eBooks, libraries, and all-round assistance. AZ-Delivery, your microelectronics expert.
Sharp Sensor Arduino Cheap
DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino
  • Use Potentiometer 105, output timing is from 0.5S to 200S. Same product link https://www.amazon.com/dp/B07CSM3K63
  • Reference links: https://www.mysensors.org/build/motion
  • NOTE: On this retrigger jumper is a solder jumper, and you need solder it by yourself
  • Pls note that there is no IR emitter in this module, the principle of PIR sensor is to detect the infrared radiation emitted by the human body, it only have a IR sensor (cell)
  • Package Included: 5 X HC-SR501 PIR Infared Sensor
Sharp Sensor Arduino Cheap
GY-6180-VL6180X Time-of-Flight Distance Sensor Module Carrier With Voltage 2.8V Regulator For Arduino I2C Level Shifter
  • 2.8V Regulator - Provides the required 2.8V for the sensor
  • I2C Level Shifter - Provides logic level conversion from 2.8V to VCC
  • 3-in-1 Module
  • IR Emitter
  • Range Sensor
Sharp Sensor Arduino Cheap
DIYmalls IR Speed Sensor Detection Module LM393 Slot Type for Arduino (Pack of 10)
  • You will received 10pcs speed module.
  • LM393 speed sensor is widely used in motor speed detection, pulse counting, position limits and so on.
  • Interface: vcc to 3.3-5V, gnd to power negative, do to ttl switch signal out.
  • You can buy more module here, https://www.amazon.co.uk/stores/page/9E5CE14B-CD3E-4825-B8A3-9FB3965726E0
Sharp Sensor Arduino Cheap
Youmile 2Pack Distance Sensor Module GP2Y0E03 Infrared Ranging Sensor 4-50CM I2C Output For Arduino With M-M Dupont Cable 20PIN
  • Voltage operation: 2.7V-5V; Output: Digital (I/C) / Analog Output ; Sensor: Infrared LED and CMOS image sensor
  • High precision measurement distance: 4 to 50 cm
  • The change of the reflectivity of the object, the ambient temperature and the running time are not easily affected by the distance detection.
  • Widely use for Non-contact switch (sanitary equipment, illuminance control, etc.), Energy-saving sensors (ATM, copiers, LCD monitors, etc.), Amusement equipment (robot, game console, etc.)
  • Package Content:2 x GP2Y0E03 Distance Sensor Module, 1 x M-M Dupont Cable 20PIN
Sharp Sensor Arduino Cheap
HiLetgo 12 V 24 V PIR Motion Sensor 7-10 M Switch IR Infrared Human Body Induction Sensor Detector Switch for LED Light Switch
  • 12V 24V PIR Motion Sensor 7-10M Infrared Human Body Induction Sensor Switch
  • Automatically turn on while detected people come, after the people left delay automatically turn off the lights.
  • Applicable to the corridor, passageway, toilet, basement, warehouse, garage and other places of automatic lighting.
  • Using photosensitive control, it won't turn on the light in the daytime or strong light environment, Also can adjust free induction lights in any light environment.
  • Automatic locked in day time to save energy, good solution for energy save. Easy to install or replace existing switch.
Sharp Sensor Arduino Cheap
NEJE 2.5 W Laser Module Head Kit Portable NEJE Master Laser Engraver Machine Replacement Module Laser Engraver Accessories DIY Carving Machine (450nm Wavelength))
  • 【Use】This module is compatible with NEJE master series laser engraving machine. The input power is 7 W, and the output power is 2.5 W.Lightweight design guarantees high power. Capable of high-speed deep engraving (0.5-1.5mm), suitable for marking patterns and logos, as well as cutting of wooden blocks with a thickness of 2.5-3mm.
  • 【Feature】12V input, 3.3-12V PWM/TTL control,can be used for laser engraving machine, CNC, DIY laser, Arduino.Sharp 7 w 5.6mm laser diode,high-quality,the maximum power 450nm 5.6mm laser diode,real 2.5 w continuous work!Equipped with temperature sensing function, high-performance heat dissipation components can not overheat under the highest power state, which makes NEJE modules highly reliable.
  • 【Advantage】New lens, Clear focus, Not stray light, Adjustable focal length.20000 hours long service life.Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor,NEJE factory 48 hour 100% power aging test, Ensure long time working!
  • 【Application】Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum. Can Not Engrave:Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material.
  • 【Guarantee】We provided 2-year warranty, and full life customer service. Other information about the product has been shown to you in the description. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. Whenever you have any questions , please contact us, we will reply to you in 24 hours.
Sharp Sensor Arduino Cheap
NEJE 5.5 W Laser Module Head Adjustable Lens Replacement Module for NEJE Master 20 W Laser Engraving Machine Accessories DIY Carving CNC Cutting Machine (450nm Wavelength)
  • 【Use】This module is compatible with NEJE master series laser engraving machine. The input power is 20 W, and the output power is 5.5 W.Very suitable for deep engraving and simple cutting. The maximum thickness of 20 W module can cut is 8mm, but it is not completed at one time which may take a long time,usually about 3mm is ideal.
  • 【Feature】12V input, 3.3-12V PWM/TTL control,can be used for laser engraving machine, CNC, DIY laser, Arduino.Sharp 20 W 5.6mm laser diode,high-quality,the maximum power 450nm 5.6mm laser diode,real 5.5 w continuous work!Equipped with temperature sensing function, high-performance heat dissipation components can not overheat under the highest power state, which makes NEJE modules highly reliable.
  • 【Advantage】New lens, Clear focus, Not stray light, Adjustable focal length.20000 hours long service life.Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor,NEJE factory 48 hour 100% power aging test, Ensure long time working!
  • 【Application】Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum. Can Not Engrave:Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material.
  • 【Guarantee】We provided 2-year warranty, and full life customer service. Other information about the product has been shown to you in the description. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. Whenever you have any questions , please contact us, we will reply to you in 24 hours.

Sharp Sensor Arduino | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits Sharp Sensor Arduino gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von Sharp Sensor Arduino veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten Sharp Sensor Arduino-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

Sharp Sensor Arduino | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel Sharp Sensor Arduino kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt Sharp Sensor Arduino

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und Sharp Sensor Arduino könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

Sharp Sensor Arduino | Günstige Produkte

Nachfolgend haben wir eine Reihe von Sharp Sensor Arduino ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige Sharp Sensor Arduino zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

Best
Paradisetronic.com Sharp GP2Y0A02YK0F 20-150 cm Distance Sensor/Distance Meter with Connection Cable e.g. for Arduino
  • Ideal for your next robotic project: can be used for distance measurements, obstacle detection and much more.
  • Optical distance measurement: The distance measurement is contactless via infrared. Internal triangulation minimizes mismeasurements due to reflections and temperature fluctuations.
  • Easy to control by analogue output: an output voltage of 0.4 V corresponds to about a distance of 150 cm, a voltage of approx. 2.5v is about 20cm
  • Measuring range from 20 - 150 cm - also ideal for use as a proximity sensor.
  • Recommended operating voltage: 4.5-5.5V, current consumption: approx. 33 mA
Best
KingBra 1 Set for Sharp Dust sensor GP2Y1010 AU0F Optical Dust Sensor with Cable for Arduino EK1365 Board
  • GP2Y1010AU0F is a dust sensor by optical sensing system for such as cigarette smoke particles are very sensitive, so commonly used in air purification systems.
  • Infrared emitting diode and phototransistor pair Angle arranged in this device, it is possible to detect airborne dust in the reflected light.
  • The sensor current consumption is very low (maximum current of 20mA, typically 11mA), and can be started up to 7 volts DC.
  • Analog sensor output voltage is proportional to the density of dust with the standard, the sensitivity of 0.5V / 0.1mg / m3.
  • Size: 46mmx30mmx17.6mm Weight : 15g
Best
pzsmocn IR Distance Sensor For Arduino 4" - 32"(10-80cm)/Sharp Distance Sensors,3-pin JST Connector,for robots ranging,Obstacle Avoidance and Advanced Path Planning.
  • operating voltage: 4.5 V to 5.5 V. average current consumption: 30 mA (typical).
  • Distance measuring range: 10 cm to 80 cm (4 to 32 ). output type: analog voltage. output voltage differential over distance range: 1.9 V (typical).
  • response time: 38 Plus/minus 10 ms. package size: 29.5*13.0*13.5 MM .
Best
ARCELI GP2Y0A21YK0F Sharp IR Analog Distance Sensor 10-80cm + Cable, Compatible
  • Distance Measuring Range: 10 cm to 80 cm (4in to 32in)
  • Output Type: Analog Voltage
  • Operating Voltage: 4.5 V to 5.5 V
  • Update Period: 38 ± 10 ms
  • Average Current Consumption: 30 mA (typical)
Best
Waveshare Dust Sensor Detector Module with Sharp GP2Y1010AU0F Onboard for Measuring PM2.5 Air Purifier Air Conditioner Monitor Supports Arduino
  • Sharp GP2Y1010AU0F onboard, detecting fine particle larger than 0.8μm in diameter, even like the cigarette smoke
  • Low power consumption, analog voltage output, the output level is linear with dust density
  • Embedded voltage boost circuit to support wide range of power supply;Sensitivity : 0.5V/(100μg/m3)
  • Applications:Air purifier;Air conditioner;Air monitor;PM2.5 Detector
  • Demo code offered
Best
ULIAN Arduimo accessonries modules/sensors for Arduino Sharp GP2Y1010AU0F DIY PM2.5 Dust Sensor GP2Y1010F for Audino / Raspberry PI
  • Type:Sensor,
  • Use For:For Arduino,
  • Sensor Function:Temperature,
  • Accessories Function:Connector,
  • Dimension(cm):5x5x3,

Sharp Sensor Arduino | Katalog

Sie können Sharp Sensor Arduino im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. Sharp Sensor Arduino ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

Sharp Sensor Arduino | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man Sharp Sensor Arduino kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von Sharp Sensor Arduino. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können Sharp Sensor Arduino direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino
  • Use Potentiometer 105, output timing is from 0.5S to 200S. Same product link https://www.amazon.com/dp/B07CSM3K63
  • Reference links: https://www.mysensors.org/build/motion
  • NOTE: On this retrigger jumper is a solder jumper, and you need solder it by yourself
  • Pls note that there is no IR emitter in this module, the principle of PIR sensor is to detect the infrared radiation emitted by the human body, it only have a IR sensor (cell)
  • Package Included: 5 X HC-SR501 PIR Infared Sensor
HiLetgo 12 V 24 V PIR Motion Sensor 7-10 M Switch IR Infrared Human Body Induction Sensor Detector Switch for LED Light Switch
  • 12V 24V PIR Motion Sensor 7-10M Infrared Human Body Induction Sensor Switch
  • Automatically turn on while detected people come, after the people left delay automatically turn off the lights.
  • Applicable to the corridor, passageway, toilet, basement, warehouse, garage and other places of automatic lighting.
  • Using photosensitive control, it won't turn on the light in the daytime or strong light environment, Also can adjust free induction lights in any light environment.
  • Automatic locked in day time to save energy, good solution for energy save. Easy to install or replace existing switch.
GY-6180-VL6180X Time-of-Flight Distance Sensor Module Carrier With Voltage 2.8V Regulator For Arduino I2C Level Shifter
  • 2.8V Regulator - Provides the required 2.8V for the sensor
  • I2C Level Shifter - Provides logic level conversion from 2.8V to VCC
  • 3-in-1 Module
  • IR Emitter
  • Range Sensor
NEJE 2.5 W Laser Module Head Kit Portable NEJE Master Laser Engraver Machine Replacement Module Laser Engraver Accessories DIY Carving Machine (450nm Wavelength))
  • 【Use】This module is compatible with NEJE master series laser engraving machine. The input power is 7 W, and the output power is 2.5 W.Lightweight design guarantees high power. Capable of high-speed deep engraving (0.5-1.5mm), suitable for marking patterns and logos, as well as cutting of wooden blocks with a thickness of 2.5-3mm.
  • 【Feature】12V input, 3.3-12V PWM/TTL control,can be used for laser engraving machine, CNC, DIY laser, Arduino.Sharp 7 w 5.6mm laser diode,high-quality,the maximum power 450nm 5.6mm laser diode,real 2.5 w continuous work!Equipped with temperature sensing function, high-performance heat dissipation components can not overheat under the highest power state, which makes NEJE modules highly reliable.
  • 【Advantage】New lens, Clear focus, Not stray light, Adjustable focal length.20000 hours long service life.Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor,NEJE factory 48 hour 100% power aging test, Ensure long time working!
  • 【Application】Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum. Can Not Engrave:Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material.
  • 【Guarantee】We provided 2-year warranty, and full life customer service. Other information about the product has been shown to you in the description. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. Whenever you have any questions , please contact us, we will reply to you in 24 hours.
NEJE 5.5 W Laser Module Head Adjustable Lens Replacement Module for NEJE Master 20 W Laser Engraving Machine Accessories DIY Carving CNC Cutting Machine (450nm Wavelength)
  • 【Use】This module is compatible with NEJE master series laser engraving machine. The input power is 20 W, and the output power is 5.5 W.Very suitable for deep engraving and simple cutting. The maximum thickness of 20 W module can cut is 8mm, but it is not completed at one time which may take a long time,usually about 3mm is ideal.
  • 【Feature】12V input, 3.3-12V PWM/TTL control,can be used for laser engraving machine, CNC, DIY laser, Arduino.Sharp 20 W 5.6mm laser diode,high-quality,the maximum power 450nm 5.6mm laser diode,real 5.5 w continuous work!Equipped with temperature sensing function, high-performance heat dissipation components can not overheat under the highest power state, which makes NEJE modules highly reliable.
  • 【Advantage】New lens, Clear focus, Not stray light, Adjustable focal length.20000 hours long service life.Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor,NEJE factory 48 hour 100% power aging test, Ensure long time working!
  • 【Application】Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum. Can Not Engrave:Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material.
  • 【Guarantee】We provided 2-year warranty, and full life customer service. Other information about the product has been shown to you in the description. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. Whenever you have any questions , please contact us, we will reply to you in 24 hours.
Youmile 2Pack Distance Sensor Module GP2Y0E03 Infrared Ranging Sensor 4-50CM I2C Output For Arduino With M-M Dupont Cable 20PIN
  • Voltage operation: 2.7V-5V; Output: Digital (I/C) / Analog Output ; Sensor: Infrared LED and CMOS image sensor
  • High precision measurement distance: 4 to 50 cm
  • The change of the reflectivity of the object, the ambient temperature and the running time are not easily affected by the distance detection.
  • Widely use for Non-contact switch (sanitary equipment, illuminance control, etc.), Energy-saving sensors (ATM, copiers, LCD monitors, etc.), Amusement equipment (robot, game console, etc.)
  • Package Content:2 x GP2Y0E03 Distance Sensor Module, 1 x M-M Dupont Cable 20PIN
DIYmalls IR Speed Sensor Detection Module LM393 Slot Type for Arduino (Pack of 10)
  • You will received 10pcs speed module.
  • LM393 speed sensor is widely used in motor speed detection, pulse counting, position limits and so on.
  • Interface: vcc to 3.3-5V, gnd to power negative, do to ttl switch signal out.
  • You can buy more module here, https://www.amazon.co.uk/stores/page/9E5CE14B-CD3E-4825-B8A3-9FB3965726E0

Sharp Sensor Arduino | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das Sharp Sensor Arduino-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • Sharp Sensor Arduino bei Amazon
  • Sharp Sensor Arduino bei Ebay
Sharp Sensor Arduino ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete Sharp Sensor Arduino wählen.

Sharp Sensor Arduino | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so Sharp Sensor Arduino noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino
  • Use Potentiometer 105, output timing is from 0.5S to 200S. Same product link https://www.amazon.com/dp/B07CSM3K63
  • Reference links: https://www.mysensors.org/build/motion
  • NOTE: On this retrigger jumper is a solder jumper, and you need solder it by yourself
  • Pls note that there is no IR emitter in this module, the principle of PIR sensor is to detect the infrared radiation emitted by the human body, it only have a IR sensor (cell)
  • Package Included: 5 X HC-SR501 PIR Infared Sensor
HiLetgo 12 V 24 V PIR Motion Sensor 7-10 M Switch IR Infrared Human Body Induction Sensor Detector Switch for LED Light Switch
  • 12V 24V PIR Motion Sensor 7-10M Infrared Human Body Induction Sensor Switch
  • Automatically turn on while detected people come, after the people left delay automatically turn off the lights.
  • Applicable to the corridor, passageway, toilet, basement, warehouse, garage and other places of automatic lighting.
  • Using photosensitive control, it won't turn on the light in the daytime or strong light environment, Also can adjust free induction lights in any light environment.
  • Automatic locked in day time to save energy, good solution for energy save. Easy to install or replace existing switch.
GY-6180-VL6180X Time-of-Flight Distance Sensor Module Carrier With Voltage 2.8V Regulator For Arduino I2C Level Shifter
  • 2.8V Regulator - Provides the required 2.8V for the sensor
  • I2C Level Shifter - Provides logic level conversion from 2.8V to VCC
  • 3-in-1 Module
  • IR Emitter
  • Range Sensor
NEJE 2.5 W Laser Module Head Kit Portable NEJE Master Laser Engraver Machine Replacement Module Laser Engraver Accessories DIY Carving Machine (450nm Wavelength))
  • 【Use】This module is compatible with NEJE master series laser engraving machine. The input power is 7 W, and the output power is 2.5 W.Lightweight design guarantees high power. Capable of high-speed deep engraving (0.5-1.5mm), suitable for marking patterns and logos, as well as cutting of wooden blocks with a thickness of 2.5-3mm.
  • 【Feature】12V input, 3.3-12V PWM/TTL control,can be used for laser engraving machine, CNC, DIY laser, Arduino.Sharp 7 w 5.6mm laser diode,high-quality,the maximum power 450nm 5.6mm laser diode,real 2.5 w continuous work!Equipped with temperature sensing function, high-performance heat dissipation components can not overheat under the highest power state, which makes NEJE modules highly reliable.
  • 【Advantage】New lens, Clear focus, Not stray light, Adjustable focal length.20000 hours long service life.Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor,NEJE factory 48 hour 100% power aging test, Ensure long time working!
  • 【Application】Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum. Can Not Engrave:Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material.
  • 【Guarantee】We provided 2-year warranty, and full life customer service. Other information about the product has been shown to you in the description. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. Whenever you have any questions , please contact us, we will reply to you in 24 hours.
NEJE 5.5 W Laser Module Head Adjustable Lens Replacement Module for NEJE Master 20 W Laser Engraving Machine Accessories DIY Carving CNC Cutting Machine (450nm Wavelength)
  • 【Use】This module is compatible with NEJE master series laser engraving machine. The input power is 20 W, and the output power is 5.5 W.Very suitable for deep engraving and simple cutting. The maximum thickness of 20 W module can cut is 8mm, but it is not completed at one time which may take a long time,usually about 3mm is ideal.
  • 【Feature】12V input, 3.3-12V PWM/TTL control,can be used for laser engraving machine, CNC, DIY laser, Arduino.Sharp 20 W 5.6mm laser diode,high-quality,the maximum power 450nm 5.6mm laser diode,real 5.5 w continuous work!Equipped with temperature sensing function, high-performance heat dissipation components can not overheat under the highest power state, which makes NEJE modules highly reliable.
  • 【Advantage】New lens, Clear focus, Not stray light, Adjustable focal length.20000 hours long service life.Built-in driver board, 20mm threaded copper core with thermal grease compound, Temperature sensor,NEJE factory 48 hour 100% power aging test, Ensure long time working!
  • 【Application】Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum. Can Not Engrave:Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material.
  • 【Guarantee】We provided 2-year warranty, and full life customer service. Other information about the product has been shown to you in the description. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module. Whenever you have any questions , please contact us, we will reply to you in 24 hours.
Youmile 2Pack Distance Sensor Module GP2Y0E03 Infrared Ranging Sensor 4-50CM I2C Output For Arduino With M-M Dupont Cable 20PIN
  • Voltage operation: 2.7V-5V; Output: Digital (I/C) / Analog Output ; Sensor: Infrared LED and CMOS image sensor
  • High precision measurement distance: 4 to 50 cm
  • The change of the reflectivity of the object, the ambient temperature and the running time are not easily affected by the distance detection.
  • Widely use for Non-contact switch (sanitary equipment, illuminance control, etc.), Energy-saving sensors (ATM, copiers, LCD monitors, etc.), Amusement equipment (robot, game console, etc.)
  • Package Content:2 x GP2Y0E03 Distance Sensor Module, 1 x M-M Dupont Cable 20PIN
DIYmalls IR Speed Sensor Detection Module LM393 Slot Type for Arduino (Pack of 10)
  • You will received 10pcs speed module.
  • LM393 speed sensor is widely used in motor speed detection, pulse counting, position limits and so on.
  • Interface: vcc to 3.3-5V, gnd to power negative, do to ttl switch signal out.
  • You can buy more module here, https://www.amazon.co.uk/stores/page/9E5CE14B-CD3E-4825-B8A3-9FB3965726E0

Sharp Sensor Arduino | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu Sharp Sensor Arduino finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 4 of 5 - 10 votes
1 Star2 Stars3 Stars4 Stars5 Stars (10 votes, average: 4,00 out of 5)
Loading...

Best Deals

Arduino Nano R3 | Top Gutscheine & Rabatte


Arduino Esp8266 | Top Gutscheine & Rabatte


Arduino Board | Top Gutscheine & Rabatte