Sovol 3d Printer | Top Gutscheine & Rabatte

Latest Sovol 3d Printer
Sovol SV01 3D Printer Direct Drive Extruder Glass Ultrabase Plate Filament End Detector 24V/350W Meanwell Power Supply Printing Size 240x280x300mm
  • Direct Drive Extruder: High quality direct extruder can easily push the filament directly into the nozzle and quickly retract the filament, faster print speed. Compatible with a wide range of PLA, ABS, TPU, WOOD, PETG filaments. Even with flexible and abrasive materials, allowing better extrusion. Dual Z axis motor, which greatly increases its printing stability.
  • Meanwell Power Supply: Built-in branded Meanwell power supply, which provides stable and sufficient power supply, protecting your printer from unexpected power surges.
  • Removable Glass Platform: The SV01 comes with tempered glass plate on the heated bed, provides better adhesive and easy to remove the model. High-power heated bed can heat up to 110 ℃.
  • Easy to Assemble: Sovol professional desktop DIY 3D printer, full metal frame and comes 95% pre-assembled, which only takes about 20 minutes to install, and easier than Creality Ender 3.
  • The SV01 has a preparation for a BL touch sensor (not included), which can be installed in a few minutes (optional).
Latest Sovol 3d Printer
Sovol 3D Filament PLA 1.75 mm 1 kg Spool for 3D Printer and 3D Pen (Black+White)
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Latest Sovol 3d Printer
Sovol Creality 3D Printer Upgraded MK8 Extruder Hot End Kit with Aluminum Heating Block Silicone Cover for Creality Ender 3
  • This original Ender 3 Hotend kit including 1 x aluminum block, 1M heating tube, 1 x 1.75mm 0.4mm brass nozzle, 1 x M6*30mm throat pipe, 1 x thermistor + brass sleeve
  • Made of high quality material Aluminum, Stainless Steel & Brass, not easy to wear and very durable
  • White wire is temperature thermistor, red wire is heating tube 24V 40W, no extra purchase and easy installation
  • Upgraded MK8 Extruder Hot End kit uses a non-stick silicone sock instead of the cotton isolation, which can keep the print head stay clean and prevent the filament from sticking to the heater block or spout, as well as it can offer a huge boost in temperature stability
  • 100% new and original Creality guaranteed. Strictly tested before shipping. Buy with Confidence!
Latest Sovol 3d Printer
Sovol PLA 3D Printer Filament 2 kg(4.4 LBS) Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Black+White
  • 2KG net (approximately 4.4 lbs) PLA Filament Wiring Tightness with Clear Spool.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.02mm) .
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.
  • Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F) .
  • Spool Diameter: 7.88" - Spool Width: 2.69" - Spool Hub Hole Diameter: 2.20".
Latest Sovol 3d Printer
Sovol SV01 Upgraded Silent Mainboard with TMC2208 Drivers BootLoader Controller Motherboard for SV01 3D Printer
  • Sovol Upgraded Silent mainboard V2.2.1 which is quieter, more powerful and has excellent stability during printing. Compatible with Sovol SV01, Creality Ender 5 plus, CR-10S, CR-10 S4, CR-10 S5, CR-X, CR-20, CR-20 PRO 3D printer.
  • Firmware is pre-installed on this board, plug and play for Sovol SV01. Support bl touch function, and if you used for other models, please flash the firmware first.
  • TMC2208 driver. Bootloader installed, make it easy to flash the firmware. Arduino/Cura can modify the firmware using USB.
  • Thermal runaway protection is enabled. The mainboard optimizes the circuit and can effectively solve the heating problem and provide overheat protection.
  • Should you have any problems with our products please do not hesitate to contact us, we will get back to you within 24 hours.Thank you.
Latest Sovol 3d Printer
Sovol Creality Ender 3 Pro Upgrade Motherboard Silent Mainboard V4.2.7(V1.1.5) with TMC2225 Driver Control Board for Ender 3/Ender 3 Pro/Ender 5/Ender 5 Pro
  • Creality upgrade silent mainboard V4.2.7 with 32 Bit TMC2225 driver replaced the original V1.1.5 board with 8 bit TMC2208 driver.
  • Marlin 2.0.1 and BootLoader installed, plug and play for Ender 3 Pro. Compatible with Ender 5, Ender 5 Pro and support bl touch, but you will need to flash the firmware.
  • Creality upgrade V4.2.7 silent board make it easier to flash the firmware. Prepare SD card, save the firmware in SD card and delete other files, only firmware reserved. Then replug the SD card and wait to 10s, when progress bar and interface appear, the firmware has been sucessfully updated.
  • Thermal runaway protection is enabled. The Board is optimized by circuit, effectively solve the heating problem.
  • If you have any question or problem with the mainboard, please contact Sovol Team directly and we will offer quick solution. Thanks!
Latest Sovol 3d Printer
Sovol Metal Resin Tanks Vats Anodized Aluminium with FEP Pre-installed and 2 Lids, Resin Vat for ELEGOO Mars, Photon/Photon S
  • Compatibility: Replacement resin vat for Elegoo Mars ANYCUBIC Photon / Photon S. The FEP film and steel ring have been preinstalled.
  • Double silicone covers keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight, and can protect the FEP film from scratches. Also perfect for resin storage.
  • Made of anodized aluminum and durable design for long term usage.
  • Clear and wear-resistance scale, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Latest Sovol 3d Printer
Creality 3D Printer Enclosure Constant Temperature Fireproof Soundproof Dustproof Protective Cover for Ender 3 Ender 3 pro
  • Safe and Convenient - Creality warm enclosure are well made of premium material and the interior are made of pure aluminum film and has been treated to be made fireproof. It fits perfectly for Ender 3/Ender 3 Pro 3D printer and allows you to cover the printer wihtout taking up too much space.
  • Constant Temperature - The 3D printer cover maintains a constant temperature printing room and creates a great printing enviroment. Prevents air from causing delamination or cracking by not adhering well to one layer, an essential accessory if you print ABS or PETG.
  • Dustproof and good noise reduction. Reduces noise from the printer, offers extra breathing room for the machine, and is also dustproof.
  • Stable Structure - Equipped with a selection of Iron pipes, stable structure, and abundant space.
  • Quick and Easy Installation - Folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room!
Latest Sovol 3d Printer
Sovol Creality Upgraded 4PCS Creality Aluminum Hand Twist Leveling Nut with 4PCS Hot Bed Die Springs for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer
  • Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
  • Last Over Years. Made by high quality aluminum, last much longer your stock plastic nuts.
  • Metal nut is more powerful and will twist more tightly than plastic nuts.
  • The torque of these nuts is large, making it easier to fine tune the hot bed.
  • Package includes 4Pcs Red Aluminum Screw Nut + 4Pcs Yellow Die Spring.
Latest Sovol 3d Printer
Creality Dustproof & Fireproof Warm Enclosure 3D Printer Tent Constant Temperature Soundproof Heating Box for Ender 3 Ender 3 Pro 3D Printer
  • Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room!
  • Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability
  • Dustproof and good noise reduction
  • The interior uses Pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure, and will not spread
  • table Structure: Equipped with a selection of Iron pipes, stable structure, and abundant space

Sovol 3d Printer | Bewertung

Auf dieser Seite finden Sie die Liste der besten Sovol 3d Printer mit einem Datenblatt, Bewertungen von Personen, die das Produkt bereits gekauft haben, Informationen zum aktualisierten Preis und aktiven Angeboten. Wir haben die Liste so aufgeteilt, dass die am häufigsten nachgefragte und verkaufte Version angezeigt wird.

Sovol 3d Printer | Details und aktive Angebote

Hier ist die Tabelle der besten Sovol 3d Printer. Klicken Sie, um Bewertungen, Details und aktive Angebote anzuzeigen:

Sovol 3d Printer Cheap
Creality 1M Capricorn Bowden Tubing, 4 Aluminum Hand Twist Leveling Nuts & 4 Hot Bed Die Springs & 4 M4x35 Screws for Ender 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR20 3D Printer
  • Upgraded Aluminum Hand Twist Leveling Nuts. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
  • 4x Hand Twist Level Nuts - Metal nuts was more powerful and will twist more tightly than the original plastic nuts. The torque of these nuts is large, making it easier to fine tune the hot bed, which keeps your printer level without having to level it often.
  • 1 Meter 100% Original Capricorn Bowden PTFE tubing - With lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
  • 4x Yellow Compression Springs - The die springs are a worthwhile upgrade, making bed levelling easier and stronger than the stock ones, so you don't have to worry about leveling the bed over and over after wash print. NOTE: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You may use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs. 4x M4x35 Screws are also included.
  • Technical Support - If you have any problems or questions about our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
Sovol 3d Printer Cheap
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Blue Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Blue
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Sovol 3d Printer Cheap
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Gray Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Gray
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Sovol 3d Printer Cheap
Creality Ender 3 New Upgraded Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 Pro/Ender 5 /CR-10 3D Printer
  • Silent function( Customized and Non-standard matching)! Creality upgraded V4.2.7 silent board has been updated from 8 bit to 32 bit.
  • Driver: TMC2225 driver. Marlin 2.0.1 and bootloader installed. You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
  • Easy to Operate: With USB Port,can be Worked With E/Z/Y/X Axis Motor.
  • Firmware 2.0.1 comes pre-installed on this board. Plug and play for Ender-3. If your printer is not Ender 3 or you would like to add a BLTouch please download the firmware here. https://www.creality.com/download
Sovol 3d Printer Cheap
Sovol 2 PCS Metal Resin Tanks Vats for ELEGOO Mars 3D Printer with 2 PCS Lids and FEP Films Pre-installed, Compatible with Anycubic Photon, Photon S and Mars 2 pro
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars Pro, Anycubic Photon/Photon S, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Sovol 3d Printer Cheap
2 PCS Metal Resin Tanks Vats for ELEGOO Mars 3D Printer with FEP Pre-installed and 2 Lids Resin Vat for ELEGOO Mars Anycubic Photon
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars Pro, Anycubic Photon/Photon S, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Sovol 3d Printer Cheap
Creality BLTouch V2 Auto Bed Leveling Sensor Kit Accessories for Creality CR -10/CR-10S4/S5/CR20/20Pro 3D Printer, Work for 2560 Mainboard 3D Printer
  • [Application] - Suitable for CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro (can't use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.(Note: suitable for the 2560 Mainboard. Please flash the firmware first, with USB cable to connect computer).
  • [Intelligence, Self-check & Alarm] - Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • [Firmware Download] - https://creality.com/download/firmware-for-bl-touch_c0006(Flash the firmware before install)
  • [Easy to Use] - This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • [Troubleshooting Guide] - https://www.antclabs.com/wiring3 If your computer does not support Progisp please change another computer to try or install progisp.exe on your pc. If the usb cannot be recognized we suggest you to buy an USBasp to fix it. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
Sovol 3d Printer Cheap
Eryone 3D Printer ER 20, Auto-leveling Bed Sensor, Super Quiet 3D Printer with TMC2209, Powerful 32Bit Motherboard, 250 * 220 * 200mm
  • Easy to Use: Auto-bed leveling gives you the perfect first layer and the ink coating glass makes you stick and remove printed objects easily.

  • Silent: TMC2209 offers whisper quiet and more accurate printing without the need of mechanical limit switch (sensorless).

  • Simplicity: Modular design, built-in power supply, auto bed leveling sensor, no bed adjust knob, plug and play. ER20‘s sleek & streamlined round corners comply with the ergonomic design.

  • Reliable: ER20 supplies resume printing, sparing you the unexpected head-scratching outage. Fully upgraded aluminum profile frame provides durability. The reliable extruder is mounted with an Eryone sensor for hassle-free printing.

  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print

Sovol 3d Printer Cheap
Official Creality CR-6 SE Leveling-free 3D Printer with 32 Bit Silent Motherboard, Auto Bed leveling, Upgraded Extruder Build Volumn 235x235x250MM 2020 Newly Released
  • 【Innovative Leveling-free Tech】 Featuring an innovative leveling-free device which is designed with a smart pressure sensor to truly achieve hassle-free and intelligently automatic platform leveling, greatly improving bed adhesion and print quality. CR-6 SE is factory pre-leveled and replace the leveling nuts on the Ender 3/CR-10, making the printing much easier.
  • 【Modularized Nozzle】 The CR-6 SE 3D printer includes a modularized nozzle for encouraging ease in nozzle maintenance and tinkering, which allows users to replace and substitute components with ease. The heat sink, heat block, teflon tube, and hotend are all deconstructable. A set of powerful cooling fans enables superior control over filament extrusion and retraction. The hotend also houses an filament runout sensor to pause prints when required.
  • 【Upgraded Dependable Extruder】 With its compact and reliable extruder, you know that a smoother extrusion and an easier filament feed will ultimately generate faster, quieter and smoother prints. Yes, this is what perfect 3D printing is all about! the new extruder design makes loading the filament quick and painless.
  • 【Silent Motherboard with Trinamic Driver】 A silent chipset is added to the CR-6 SE. Its latest trinamic driver 2208 helps to ensure that voltage control, fast movement, and printing in silence are a given. Moreover, the extruder fans are much quieter compared with Ender 3 and CR-10.
  • 【Easy Assemble】 In comparison to an Ender 3, CR-6 SE comes almost assembled. You only need to spend 5 minutes to attach the gantry with four screws, the screen, filament spool holder, portable handle and plug in some wires.
DISCOUNTSovol 3d Printer Cheap
Tenlog TL-D3 Pro 3D Printer, Independent Dual Extruder 3D Printer with 4.3'' Touch Color Screen,Silent Mainboards TMC2208 Drive Support PVA TPU ABS PLA,Direct Feed FDM 3D Printer 300x300x350mm
  • 【INDEPENDENT DUAL EXTRUDER DESIGN】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Unique Near-End and Direct Drive Design】Tenlog 3D Printer uses a direct drive extruder and a powerful near-end silent motor design,so that it can print various filament,such as TPU,PVA,PLA,ABS,HIPS,WOOD,PETG,flexible.
  • 【4.3'' TOUCH COLOR SCREEN 】Tenlog TL-3 Pro 4.3”’s Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
  • 【EASY TO ASSEMBLE】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!

Sovol 3d Printer | Rezensionen

Auf dieser Seite finden Sie eine Liste von Produkten mit verwandten Bewertungen und Meinungen von Kunden, die bereits Sovol 3d Printer gekauft haben. Die Bewertungen sind in Sternen ausgedrückt. Wenn Sie darauf klicken, können Sie auf den Abschnitt mit Kommentaren und Meinungen zugreifen. Die Rezensionen sind eine nützliche Methode, um besser beurteilen zu können, ob es sich lohnt, dass Sie das Produkt kaufen oder nicht. Erfahrungsberichte von vorherigen Einkaufserlebnissen helfen um die Qualität des Produkts zu verstehen und ob es wirklich dem entspricht, was versendet wird oder ob Fabrikfehler vorliegen oder wirklich alles in Ordnung ist. Benutzer, die Bewertungen von Sovol 3d Printer veröffentlichen, geben nicht nur nützliche Informationen zur Kaufphase, sondern auch zur Verwendung im realen Leben, wodurch sie die Verwendung des Produktes besser verstehen können. Oft liegen den Rezensionen auch Bilder bei mit denen Sie sowohl die Stärken als auch etwaige Mängel identifizieren können. Die vorgeschlagene Liste ordnet die Produkte anhand der erhaltenen Bewertungen, der positiven Meinungen und der Relevanz für die von den Kunden angegebenen Bedürfnisse. Im oberen Teil des Rankings finden sie die besten Sovol 3d Printer-Produkte und im danach die anderen Möglichkeiten, die ebenfalls immer aus den beliebtesten Produkten ausgewählt werden.

Sovol 3d Printer | Bester Preis

Der Preis wird täglich aktualisiert, sodass Sie immer wissen, wie viel Sovol 3d Printer kostet. In der Preisliste können sich die Kosten je nach Angebot des Tages ändern. Um den letzten Preis zu sehen, klicken Sie einfach auf die entsprechende Schaltfläche "Preis anzeigen". Auf diese Weise können Sie das günstigste Angebot für das zum Verkauf stehende Produkt ermitteln und dort kaufen, wo es Ihnen passt.

Angebote Bestes Produkt Sovol 3d Printer

Im Laufe des Jahres gibt es Werbeaktionen für Produkte, die online zum Verkauf stehen, und Sovol 3d Printer könnte darunter sein. Die Angebote werden in der Produktpräsentationsbox angezeigt. Wenn eine Aktion aktiv ist, wird Ihnen eine grüne Box mit dem Wort "Angebot" angezeigt. Wir empfehlen jedoch, immer auf die Schaltfläche "Sehen" zu klicken, um direkt auf dem Produktblatt nach Lampo-Werbeaktionen zu suchen (Angebote, die nur wenige Stunden dauern).

Sovol 3d Printer | Günstige Produkte

Nachfolgend haben wir eine Reihe von Sovol 3d Printer ausgewählt, die zu den günstigsten auf dem Markt gehören. Scrollen Sie einfach in der Liste nach unten, um günstige Sovol 3d Printer zu finden, die nach Preis, vom billigsten bis zum teuersten, geordnet sind.

Best
Sovol SV01 3D Printer Direct Drive Extruder Glass Ultrabase Plate Filament End Detector 24V/350W Meanwell Power Supply Printing Size 240x280x300mm
  • Direct Drive Extruder: High quality direct extruder can easily push the filament directly into the nozzle and quickly retract the filament, faster print speed. Compatible with a wide range of PLA, ABS, TPU, WOOD, PETG filaments. Even with flexible and abrasive materials, allowing better extrusion. Dual Z axis motor, which greatly increases its printing stability.
  • Meanwell Power Supply: Built-in branded Meanwell power supply, which provides stable and sufficient power supply, protecting your printer from unexpected power surges.
  • Removable Glass Platform: The SV01 comes with tempered glass plate on the heated bed, provides better adhesive and easy to remove the model. High-power heated bed can heat up to 110 ℃.
  • Easy to Assemble: Sovol professional desktop DIY 3D printer, full metal frame and comes 95% pre-assembled, which only takes about 20 minutes to install, and easier than Creality Ender 3.
  • The SV01 has a preparation for a BL touch sensor (not included), which can be installed in a few minutes (optional).
Best
Sovol SV02 3D Printer with All-Metal Dual Extruder, Silent Mainboards TMC2208 Drive, Meanwell Power Supply and 4.3 inch Touchscreen, Printing Size 240 x 280 x 300 mm
  • 【Upgraded 2 in 1 Out Hotend】 Support two-color printing, switch between two filaments when printing, and extrude through a nozzle. Provides high speed and stable print quality. Build volume (mm) 280 x 240 x 300 (one color), 240 x 220 x 300 (two colors)
  • 【Silent Motherboard TMC2208】 Works more quietly, provides excellent stability and protection for the SV02 3D printer. Marlin 2.0 firmware and bootloader preinstalled. With safety warning system of Thermal Runaway Protection, against lose control of temperature.
  • 【Meanwell Power Supply】 A stable and sufficient power supply protects your printer from unexpected voltage peaks. Safer and more reliable.
  • 【4.3 '' Color Touchscreen】 With an intuitive and responsive interface that allows you to change and monitor relevant settings for direct control throughout the printing process.
  • 【Other Features】 Removable glass plate, resume printing function, dual Z-axis design, support Bl-Touch add-on, support TF card and USB online printing.
Best
Sovol 3D Filament PLA 1.75 mm 1 kg Spool for 3D Printer and 3D Pen (Black+White)
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Best
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Gray Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Gray
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Best
Sovol 2 PCS Metal Resin Tanks Vats for ELEGOO Mars 3D Printer with 2 PCS Lids and FEP Films Pre-installed, Compatible with Anycubic Photon, Photon S and Mars 2 pro
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars Pro, Anycubic Photon/Photon S, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Best
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Blue Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Blue
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Best
Creality Ender 3 New Upgraded Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 Pro/Ender 5 /CR-10 3D Printer
  • Silent function( Customized and Non-standard matching)! Creality upgraded V4.2.7 silent board has been updated from 8 bit to 32 bit.
  • Driver: TMC2225 driver. Marlin 2.0.1 and bootloader installed. You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
  • Easy to Operate: With USB Port,can be Worked With E/Z/Y/X Axis Motor.
  • Firmware 2.0.1 comes pre-installed on this board. Plug and play for Ender-3. If your printer is not Ender 3 or you would like to add a BLTouch please download the firmware here. https://www.creality.com/download

Sovol 3d Printer | Katalog

Sie können Sovol 3d Printer im speziellen Katalog finden, in dem die gesamte Produktlinie zum Verkauf angeboten wird. Sovol 3d Printer ist in dieser Katalogpräsentation 2019 zusammen mit der Produktfamilie der Marke enthalten. Der Online-Katalog wird regelmäßig aktualisiert, um die neuesten Details und Innovationen sowie den Preis relativ zum öffentlichen Preis zu erfahren.

Sovol 3d Printer | Wo kaufen?

Dies ist das ewige Dilemma von heute, wo man Sovol 3d Printer kaufen soll. Online kaufen oder direkt im Geschäft?

  • Online: Die Vorteile von Online-Shops ergeben sich aus der sofortigen Verfügbarkeit von Sovol 3d Printer. Sie können direkt zu Hause per Kurier empfangen werden (manchmal sogar ohne Versandkosten). Online können Sie auch die Datenblätter einsehen, in denen die Details aufgeführt sind, und die Meinungen der Benutzer lesen, die es ausprobiert haben.
  • Geschäft: Im Geschäft hingegen können Sie das Produkt selbst ausprobieren, Sie können Sovol 3d Printer direkt sehen, wie es funktioniert, und haben daher eine klarere Vorstellung vom Produkt. Nicht immer, aber in einigen Fällen ist es möglich, Hinweise von Experten im Shop zu erhalten und daher weitere Informationen und Merkmale zu bewerten. Tendenziell können wir sagen, dass ein Online-Kauf Geld spart. In den meisten Fällen können Sie in Online-Shops günstigere Preise erzielen und daher weniger ausgeben.

Sovol 2 PCS Metal Resin Tanks Vats for ELEGOO Mars 3D Printer with 2 PCS Lids and FEP Films Pre-installed, Compatible with Anycubic Photon, Photon S and Mars 2 pro
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars Pro, Anycubic Photon/Photon S, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
2 PCS Metal Resin Tanks Vats for ELEGOO Mars 3D Printer with FEP Pre-installed and 2 Lids Resin Vat for ELEGOO Mars Anycubic Photon
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars Pro, Anycubic Photon/Photon S, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Blue Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Blue
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Creality BLTouch V2 Auto Bed Leveling Sensor Kit Accessories for Creality CR -10/CR-10S4/S5/CR20/20Pro 3D Printer, Work for 2560 Mainboard 3D Printer
  • [Application] - Suitable for CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro (can't use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.(Note: suitable for the 2560 Mainboard. Please flash the firmware first, with USB cable to connect computer).
  • [Intelligence, Self-check & Alarm] - Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • [Firmware Download] - https://creality.com/download/firmware-for-bl-touch_c0006(Flash the firmware before install)
  • [Easy to Use] - This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • [Troubleshooting Guide] - https://www.antclabs.com/wiring3 If your computer does not support Progisp please change another computer to try or install progisp.exe on your pc. If the usb cannot be recognized we suggest you to buy an USBasp to fix it. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Gray Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Gray
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Eryone 3D Printer ER 20, Auto-leveling Bed Sensor, Super Quiet 3D Printer with TMC2209, Powerful 32Bit Motherboard, 250 * 220 * 200mm
  • Easy to Use: Auto-bed leveling gives you the perfect first layer and the ink coating glass makes you stick and remove printed objects easily.

  • Silent: TMC2209 offers whisper quiet and more accurate printing without the need of mechanical limit switch (sensorless).

  • Simplicity: Modular design, built-in power supply, auto bed leveling sensor, no bed adjust knob, plug and play. ER20‘s sleek & streamlined round corners comply with the ergonomic design.

  • Reliable: ER20 supplies resume printing, sparing you the unexpected head-scratching outage. Fully upgraded aluminum profile frame provides durability. The reliable extruder is mounted with an Eryone sensor for hassle-free printing.

  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print

DISCOUNT
Tenlog TL-D3 Pro 3D Printer, Independent Dual Extruder 3D Printer with 4.3'' Touch Color Screen,Silent Mainboards TMC2208 Drive Support PVA TPU ABS PLA,Direct Feed FDM 3D Printer 300x300x350mm
  • 【INDEPENDENT DUAL EXTRUDER DESIGN】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Unique Near-End and Direct Drive Design】Tenlog 3D Printer uses a direct drive extruder and a powerful near-end silent motor design,so that it can print various filament,such as TPU,PVA,PLA,ABS,HIPS,WOOD,PETG,flexible.
  • 【4.3'' TOUCH COLOR SCREEN 】Tenlog TL-3 Pro 4.3”’s Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
  • 【EASY TO ASSEMBLE】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!

Sovol 3d Printer | Amazon oder Ebay

Amazon und Ebay sind in der Tat die beiden Giganten des E-Commerce und können sich auf Millionen von Nutzern verlassen, die jeden Tag einkaufen. Das Sovol 3d Printer-Produkt finden Sie in diesen Online-Shops. Um es zu überprüfen, gehen Sie einfach auf diese Seite furch die folgenden Links:

  • Sovol 3d Printer bei Amazon
  • Sovol 3d Printer bei Ebay
Sovol 3d Printer ist bis auf wenige Fälle, meistens verfügbar. Es reicht jedoch aus, die Details des Produktblatts zu lesen, um zu verstehen, ob es in Kürze wieder zum Verkauf angeboten wird. Der Vorteil von Amazon besteht darin, dass es sich auf Prime verlassen kann, den Service, der die Kosten senkt, indem er in vielen Fällen den Versand kostenlos macht. Ebay hingegen kann sich auf die Garantie derjenigen verlassen, die Paypal als Zahlungsmethode für das verwendete Sovol 3d Printer wählen.

Sovol 3d Printer | Rabattgutschein

Wenn Sie bereits über einen Kauf bei Amazon nachdenken, empfehlen wir Ihnen, zuerst die Amazon Discount Coupon-Seite aufzurufen, damit Sie einen zusätzlichen Preisvorteil erhalten. Sie müssen lediglich auf diesen Rabattcoupon zugreifen, um den Preis Ihres Warenkorbs zu senken und so Sovol 3d Printer noch günstiger zu erhalten. Klicken Sie auf den oben angegebenen Link, um das Verfahren anzuzeigen, mit dem Sie diese weitere Vergünstigung erhalten können.

Sovol 2 PCS Metal Resin Tanks Vats for ELEGOO Mars 3D Printer with 2 PCS Lids and FEP Films Pre-installed, Compatible with Anycubic Photon, Photon S and Mars 2 pro
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars Pro, Anycubic Photon/Photon S, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
2 PCS Metal Resin Tanks Vats for ELEGOO Mars 3D Printer with FEP Pre-installed and 2 Lids Resin Vat for ELEGOO Mars Anycubic Photon
  • Sovol 3D resin vat fits for ELEGOO Mars/Mars Pro, Anycubic Photon/Photon S, QIDI TECH Shadow 5.5 S. The FEP film and steel ring have been preinstalled.
  • Made of anodized aluminum and durable design for long term usage.
  • With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage.
  • Clear and wear-resistance measurements, easier to use and convenient for printing. Also very easy to replace FEP film.
  • Perfect spare resin vat when you need to change resin color faster and have a better printing experience.
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Blue Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Blue
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Creality BLTouch V2 Auto Bed Leveling Sensor Kit Accessories for Creality CR -10/CR-10S4/S5/CR20/20Pro 3D Printer, Work for 2560 Mainboard 3D Printer
  • [Application] - Suitable for CR-10S/ CR 10S4/ CR 10S5/ CR-20 / CR-20 Pro (can't use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.(Note: suitable for the 2560 Mainboard. Please flash the firmware first, with USB cable to connect computer).
  • [Intelligence, Self-check & Alarm] - Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • [Firmware Download] - https://creality.com/download/firmware-for-bl-touch_c0006(Flash the firmware before install)
  • [Easy to Use] - This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • [Troubleshooting Guide] - https://www.antclabs.com/wiring3 If your computer does not support Progisp please change another computer to try or install progisp.exe on your pc. If the usb cannot be recognized we suggest you to buy an USBasp to fix it. If you have any questions while installing or using, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
Sovol PLA 3D Printer Filament 1 kg(2.2 LBS) Gray Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.02 mm, 1.75 mm, Gray
  • Material: PLA; Operating temperature range: 190-220 ° C; Diameter: 1.75 mm; Weight: 1kg / spool
  • Smooth and shiny appearance, no knots, easy printing and excellent adhesion.
  • The diameter of the filament is regular, no residue, the inter-layer adhesion is good and the prints are beautiful without post-processing.
  • Depending on your printer, as with all filaments, we advise you to take a temperature tour to find the optimum print setting.
  • The filament is well packaged in a carton with airtight vacuum bag that will not open during transport.
Eryone 3D Printer ER 20, Auto-leveling Bed Sensor, Super Quiet 3D Printer with TMC2209, Powerful 32Bit Motherboard, 250 * 220 * 200mm
  • Easy to Use: Auto-bed leveling gives you the perfect first layer and the ink coating glass makes you stick and remove printed objects easily.

  • Silent: TMC2209 offers whisper quiet and more accurate printing without the need of mechanical limit switch (sensorless).

  • Simplicity: Modular design, built-in power supply, auto bed leveling sensor, no bed adjust knob, plug and play. ER20‘s sleek & streamlined round corners comply with the ergonomic design.

  • Reliable: ER20 supplies resume printing, sparing you the unexpected head-scratching outage. Fully upgraded aluminum profile frame provides durability. The reliable extruder is mounted with an Eryone sensor for hassle-free printing.

  • Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print

DISCOUNT
Tenlog TL-D3 Pro 3D Printer, Independent Dual Extruder 3D Printer with 4.3'' Touch Color Screen,Silent Mainboards TMC2208 Drive Support PVA TPU ABS PLA,Direct Feed FDM 3D Printer 300x300x350mm
  • 【INDEPENDENT DUAL EXTRUDER DESIGN】Our TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual material printing mode, you can get two color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.
  • 【Unique Near-End and Direct Drive Design】Tenlog 3D Printer uses a direct drive extruder and a powerful near-end silent motor design,so that it can print various filament,such as TPU,PVA,PLA,ABS,HIPS,WOOD,PETG,flexible.
  • 【4.3'' TOUCH COLOR SCREEN 】Tenlog TL-3 Pro 4.3”’s Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.
  • 【EASY TO ASSEMBLE】It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.
  • 【WARRANTY AND SERVICE】 We provide a 1 year warranty for the 3D printer and a 3 month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to [email protected] and we will reply within 24 hours!

Sovol 3d Printer | Alternativen oder ähnliche Produkte

Wenn Sie die Details, das technische Datenblatt und die Informationen, die Sie beim Lesen der Bewertungen erhalten haben, nicht überzeugt haben, können Sie Alternativen zu Sovol 3d Printer finden. Je nach Ihren Bedürfnissen und Markenpräferenzen gibt es mehrere interessante Alternativlösungen oder ähnliche Produkte, die dieselbe Funktion erfüllen können. Sie können dabei wieder die Bewertungen und Meinungen dieser lesen und werden Sie verstehen, ob das Alternativprodukt tatsächlich eine zu berücksichtigende Wahl sein könnte.

Rating: 3 of 5 - 1 votes
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 3,00 out of 5)
Loading...

Best Deals

3d Popsockets For Phones | Top Gutscheine & Rabatte


3d Wireless Mouse | Top Gutscheine & Rabatte


3d Skull Ice Cube Tray | Top Gutscheine & Rabatte